TechBrands Battery, Charger and Alternator Tester 12V
42.9 AUD
Examine the detailed sheet with complete information, compare prices and find features for TechBrands Battery, Charger and Alternator Tester 12V, on sale at the price of 42.9 AUD; it belongs to the Car Parts, Accessories and Styling category; the production is handled by TechBrands, and the sale is managed by TechBrands Battery, Charger and Alternator Tester 12V.
A nifty device to quickly indicate the condition of your 12V battery, charger or alternator. 3 LEDs to indicate battery and charge under engine on/engine off conditions. Compact, lightweight, Includes 600mm leads with croc clips Inbuilt magnet to secure the unit while taking measurements. Dimensions: 120(L) x 33(W) x 20(D)mm
EAN: 9319236914922
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
A nifty device to quickly indicate the condition of your 12V battery, charger or alternator. 3 LEDs to indicate battery and charge under engine on/engine off conditions. Compact, lightweight, Includes 600mm leads with croc clips Inbuilt magnet to secure the unit while taking measurements. Dimensions: 120(L) x 33(W) x 20(D)mm
EAN: 9319236914922
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
TechBrands Intelligent 6V/12V/24V 15A Battery Charger
368.9 AUD
An intelligent battery charger suitable for flooded and gel lead acid batteries including deep cycle batteries at 6V, 12V or 24V. The microprocessor controlled unit provides 4 stages of charging, Soft Start, Bulk Charge, Absorption and Float which assists in the batteries life expectancy and performance. An auto detection feature provides a user friendly experience, which can be pre-programmed or manually set for greater control. Should a blackout occur or AC input power be lost during a charging operation the memory function will resume charging once power is re-established. Other features include temperature/voltage compensation, reverse polarity/short circuit protection and a battery status indicator. Ideal for cars, motorcycles, caravans and boats with battery capacities between 20-200Ah. It's also ultra-portable with a handy storage pocket in the back for the leads. NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. Memory function Temperature controlled fan LED battery status display Temperature and voltage compensation Input: 220 240VAC, 300W Output: 15A @ 12V 7A @12V/24V 2A @ 6V/12V/24V Anti spark Short circuit Reverse polarity Over heating/current/voltage Width : 170.0mm Height : 230.0mm Depth : 140.0mm Rated for AU Mains : true AC Voltage : 240.0 Charger Output Voltage : 6.0V, 12.0V, 24.0V Charger Output Current : 2.0A Controller Type : PWM Connection Type : Alligator Clips Reverse Polarity Protection : true
TechBrands 12V 1A SLA Battery Charger
67.9 AUD
A mains powered Lead Acid battery charger designed for 12V batteries. Features intelligent automatic charge controller to stop charging when the battery is full and maintain the battery with a 'floating' charge mode. This feature allows you to leave the charger connected to the battery without risk of overcharging and know your battery is always ready to go. Includes a 2m long cable with interchangeable DC plug and Alligator clips. NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. Float output voltage: 14.4V Bulk charge mode voltage: 14.4V Suitable for: jet skis and small motor bikes Length : 70.0mm Width : 40.0mm Depth : 40.0mm Cable Length : 2.0m Mains Voltage Range : 100.0V, 240.0V Frequency : 50.0Hz Rated for AU Mains : true Rated for US Mains : true Auto-select mains voltage : true Mains Item connection : Mains AU/NZ 3 Pin Type of Batteries : Sealed Lead Acid (SLA), Deep Cycle SLA, Deep Cycle Gel Cell, Lead Acid Charger Output Voltage : 12.0V Charger Output Current : 1.0A Controller Type : Multi-Stage Connection Type : Alligator Clips
TechBrands Victron Automotive IP65 Battery Charger (6V/12V-1.1A)
205.9 AUD
Thanks to its seven-step charging algorithm, this professional smart charger maintains the health of your 12V lead-acid or Lithium batteries, and helps provide better performance and a longer battery life. A force-fed low current function can also recover some deeply-discharged 'dead' lead-acid batteries, which can save you the expense of buying a replacement. Built-in LEDs and one-button operation sets and shows the charging status and battery condition. Alternatively, the active charge status and operation can be set and checked in real-time via a Bluetooth enabled Smartphone, tablet or laptop. A graphical view and historical usage statistics can be viewed for the past 40 charge cycles, and expert settings can be set for optimum charging. The charger's IP65 splash and dustproof rating makes it ideal for use in workshops, and safety features protect against reverse polarity, short circuits, and over-temperature. Supplied with 1.5m long lead with protected battery clamps or M6 eye terminals for temporary or permanent applications. In addition, the charger can also double as a power supply to power 12V devices in the workshop with or without a battery connected. Mains powered. Charging modes: 1. Test/Charge 2. Bulk 3. Absorption 4. Recondition 5. Float 6. Storage 7. Refresh FEATURES: - Supports Lead-acid and LiFePO4 12V batteries - IP65 rated - Bluetooth connectivity - Android, iOS/Mac compatible App - High efficiency & Silent Operation Four models to choose from: MB3950: 12V 5A. Supports lead-acid batteries from 7Ah to 50Ah or Li-ion batteries from 4Ah to 50Ah. MB3952: 12V 7A. Supports batteries from 7Ah up to 70Ah or Li-ion batteries from 4Ah to 70Ah. MB3954: 12V 10A. Supports batteries from 10Ah up to 100Ah or Li-ion batteries from 6Ah to 100Ah. MB3956: 12V 25A. Supports batteries from 33Ah up to 250Ah or Li-ion batteries from 20Ah to 250Ah. MB3958: 6V/12V 1.1A. Supports batteries from 20Ah up to 50Ah or Li-ion batteries from 20Ah up to 50Ah. SPECIFICATIONS: Charge Voltage: - Absorption: Normal: 7,2 V 14,4 V High: 7,35 V 14,7 V Li-ion: 7,1 V 14,2 V - Float: Normal: 6,9 V 13,8 V High: 6,9 V 13,8 V Li-ion: Disabled - Storage: Normal: 6,6 V 13,2 V High: 6,6 V 13,2 V Li-ion: 6,75 V 13,5 V Note: This item requires Australian Standard 230V / 50Hz mains power supply to operate. Please check your local power supply to ensure that this item will work in your country. Adapters and transformers may be required and are not included. IP Rating : IP65 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 5 - Water jets Length : 182mm Width : 81mm Height : 45mm Weight : 900g Mains Voltage Range : 220V, 250V Frequency : 50Hz, 50Hz Mains Max Current : 0.6A Packaged Volume : 2.93l Packaged Weight : 1kg Packaged Length : 28cm Packaged Width : 19cm Packaged Height : 5.5cm Type of Batteries : AGMDeep Cycle Gel CellSealed Lead Acid (SLA) Charger Output Voltage : 7.2V, 14.4V Charger Output Current :...
TechBrands Battery Discharge 20A M148A Protector Module 12V
105.9 AUD
Protects your car battery from total discharge by switching off appliances such as fridges and TV sets before the battery voltage drops to an unrecoverable level. When battery voltage is re-established by recharging, it switches appliances on automatically. The interrupting voltage is adjustable from 10.4 to13.3 VDC. Essential low-cost insurance if you have a dual battery setup in a boat, 4WD, RV or for an alternative energy system such as solar or wind power. Max. switching current: 20A Interrupting voltage: 10.4 - 13.3VDC Resetting voltage: approx. 0.8V (± 0.3V) above interrupt voltage Current consumption:
TechBrands AGM Deep Cycle Battery in 330mm Case 12V 120Ah
624.9 AUD
AGM batteries have been the popular choice for many applications over the last 50 years where low cost, reliable and portable power is needed. This 120Ah slimline AGM battery is the same dimensions as our 100Ah battery but with more capacity!! It has an absorbent glass mat (AGM) embedded in the structure of the plates which stops the plates from buckling under heavy discharge current. By helping make the innards of the battery virtually solid, you can mount it in any position, but it is still preferable, of course, to mount the battery upright, even for the sake of convenience of terminal access. These batteries are ideal as house / auxillary batteries for caravans, camper trailers and motorhomes. They also can be used in remote area systems where no power is available. and Note: It is important to not discharge an AGM more than 60% between recharges. Width : 330mm Height : 217mm Depth : 172mm Weight : 31kg DC Voltage : 12V Amp Hour Rating : 120Ah Connection Type : M8 Bolt/Nut
Powertech Jump Starter and Powerbank with Wireless Qi Charger (12V)
574.9 AUD
Not only is it light and portable with a whopping 1000A cranking current, it also features a wireless Qi charger for your phone and two USB sockets for your other devices. You won't be caught in the dark either thanks to the built in torch with SOS beacon function. Charging is via the onboard USB C socket. LiCoO2 Battery Reverse Polarity Protection Short Circuit Protection Low Voltage Protection Overheat Protection
VEVOR Battery Spot Welder 788H Pulse Welder & Battery Charger 2 Welding Modes
209.99 AUD
VEVOR Battery Spot Welder 788H Pulse Welder & Battery Charger 2 Welding Modes High-Power Output Our dual welding modes pulse spot welder also comes with 300g - 750g adjustable welding needle pressure for different welding conditions. 2 Welding Modes Clear LED Panel Display Compact and Portable Battery Test/Charge Spot Welding Thickness: 0.15mm (Pure Nickel Strip),Item Model Number: 788H,Welding Needle Pressure: 300g-750g,Product Dimensions: 9.6'' x 5.5'' x 8.7'' / 245 x 140 x 220 mm,Net Weight: 10.1 lbs / 4.6kg ,Max Output Power: 2.8KW ,Welding Current: 500-800A
TechBrands Marine Grade Lighter Socket and Dual USB Car Charger
67.9 AUD
High quality, marine grade, dual function add-on module. Includes locking cigarette power socket capable of up to 10A and dual USB charger module capable of up to 3.5A. Supplied with multiple mounting options for through panel or surface mounting. A rugged option for adding an extra power output on your 4WD, boat, or other vehicle. Professional look for minimal cost and effort Socket dust covers included Connections via 6.3mm spade terminals for easy wiring Also available with additional modules Dimensions for : Including Bracket Dimension details : Panel Mounting Width : 100.0mm Height : 42.0mm Mounting Method : Surface Plug or Socket Type : Cigarette Lighter Device : Socket Pack Quantity : 1.0pc Contacts / Pins : 1.0pc Case Material : Plastic Contact Material : Stainless Steel - Marine Grade (316) Dimension for : Including Bracket Dimensions details : Under Dash / Surface Mount Hood Width : 98.0mm Height : 49.0mm Depth : 78.0mm
TechBrands Solar Trickle Battery Charger (12V 1.5W)
81.9 AUD
Perfect for keeping your boat, car, tractor, motorcycle or any 12v house battery topped up. It includes battery clips and a cigarette lighter adaptor for simple connection, and will mount easily on windshield or dash (suction cups provided). The built in blocking diode prevents any drain on your battery at night. Provides up to 1.5W charging power, which is plenty to prevent idle discharge of your expensive vehicle battery, works even on cloudy days. Features: Trickle charge to compensate for natural battery discharge Cigarette lighter / battery clip option Use with any rechargeable 12V battery Dash/ Windshield mount (suction cups supplied) Power Rating: 1.5W (+-5%) DC Voltage : 1.5V DC Voltage tolerance : 5.0% Width : 125.0mm Height : 335.0mm Depth : 20.0mm Cable length : 2.5m Weight : 470.0g Open Circuit Voltage : 21.0V Short Circuit Current : 107.0A Voltage at Power Max : 17.5V Current at Power Max : 85.7A Power Connector : Alligator Clips
TechBrands 12V Deep Cycle SLA Gel Battery for Solar Installation - 100Ah
574.9 AUD
Deep-cycle gel performance for solar installations and other alternative energy systems. Note: Due to excessive weight this product cannot be shipped by express or air freight and may attract a surcharge when shipped by road freight. Please contact our call centre for details. DC Voltage : 12.0V Width : 330.0mm Height : 223.0mm Depth : 173.0mm Weight : 31.5kg Recharging Voltage : 14.4V, 15.0V Standard Recharge Current : 10.0A Recharging Time : 10.0hr Battery Chemical Composition : Deep Cycle Gel Cell Battery usage : Rechargeable Battery Peak Current : 1000.0A Amp Hour Rating : 100.0Ah 20 Hour Capacity : 102.0Ah 10 Hour Capacity : 100.0Ah 5 Hour Capacity : 81.0Ah 1 Hour Capacity : 58.5Ah Connection Type : M8 Bolt/Nut Type of battery : SLA Block Battery Code : DMD12-100 GEL
TechBrands 12V Deep Cycle SLA Gel Battery for Solar Installation - 26Ah
335.9 AUD
These add genuine deep-cycle batteries to Jaycar's already substantial range of batteries. As with all gel cells, they can be operated and charged in any position, are leakproof and completely sealed. Gel batteries are ideal for solar power, camping, 4WD, auxilliary applications and anywhere deep discharge and recovery is required. Note: Due to excessive weight this product cannot be shipped by express or air freight and may attract a surcharge when shipped by road freight. Please contact our call centre for details. DC Voltage : 12.0V Width : 166.0mm Height : 125.0mm Depth : 175.0mm Weight : 8.35kg Recharging Voltage : 13.5V, 14.7V Standard Recharge Current : 3.0A Recharging Time : 20.0hr Battery Chemical Composition : Deep Cycle Gel Cell Battery usage : Rechargeable Battery Peak Current : 260.0A Amp Hour Rating : 26.0Ah 20 Hour Capacity : 27.3Ah 10 Hour Capacity : 26.0Ah 5 Hour Capacity : 21.8Ah 1 Hour Capacity : 16.5Ah Connection Type : M5 Bolt/Nut Type of battery : SLA Block Battery Code : DMD12 - 26 GEL
TechBrands In-car Battery Monitor and Temperature Display
57.9 AUD
Absolute plug and play - simply plug it into an available cigarette lighter socket and you're good to go! Whenever power is applied, it will provide you with battery / system voltage, and current temperature. Dual function display No installation required Bright LED screen Temperature Meter: -10 ~ 80 degrees Celsius Temperature Resolution: 0.1 degrees Celsius LED: Blue+Red Measures in Celcius : true Indoor / Interior Scale : -10.000000 degrees Celsius, 80.0 degrees Celsius Measures in Fahrenheit : false Thermometer Resolution : 0.1 degrees Celsius Measures in Kelvin : false DC Voltage Accuracy : 0.1 digits DC Volts Measurement Range : 10.0V, 28.0V Depth : 77.0mm Diameter : 44.0mm Weight : 26.0g
Powertech 12V 140A Dual Battery Isolator (VSR)
137.9 AUD
Allows two batteries to be charged from your engine alternator at the same time. When your engine is on and the start battery is sufficiently charged the isolator kit will begin charging the second (auxiliary) battery simultaneously. When the voltage of the start battery drops (i.e.. the engine is stopped) the isolator kit disengages from charging the auxiliary battery. This isolates the start battery and eliminates the possibility of draining it, ensuring that you always have enough charge to start your engine, and also protects sensitive electronic equipment powered from the auxiliary battery from harmful engine start-up spikes. Suitable for 12VDC Marine, 4WD, caravan and solar applications. Emergency override feature LED status indicator Continuous rating: 140A Intermittent rating: 170A Voltage rating: 12VDC (max 15VDC) Cut in voltage: 13.7VDC Cut off voltage: 12.8V Isolator dimensions: 67(L) x 67(W) x 53(H)mm
Powa Beam Dual Lithium Battery Charger with Display
26.9 AUD
Intelligent lithium battery charger that can charge a wide range if lithium batteries and also has the ability to bring them back to life if over discharged! 2x1A fast charging slots (Automatically chooses the most suitable charging current (0.5A/1A) for batteries to maximize battery life) Diaply panel shows charge current & level Convenient micro USB charge port OV activation function, brings overdischarged batteries back to life
TechBrands Vehicle Plate Number Lights (375x35x22mm 12/24V)
127.9 AUD
Specialty License Plate Lamps - Full Plate Length Unit Full plate width lamp 375(L) x 35(H) x 22(D)mm LED, 12-24V.
TechBrands LED Tester Module
48.9 AUD
This pre-assembled module will save you time, all packaged into a small yet reliable form factor. It's simple to connect and configure to your needs. With this basic but essential tool it is possible to check the function, brightness, colour and polarity of most kinds of light emitting diodes (LED). The LED to be tested plugs into the front panel, at the current you wish to test it with. Two 10 mA positions have been included on this multi-LED tester so that comparisons between two LEDs can be made simultaneously. 9V battery required Test currents: 1mA, 2.5mA, 5mA, 10mA, 20mA, 50mA
TechBrands Floodlight LED Mini (IP68 12-24V White)
77.9 AUD
Amazingly bright, completely shock and waterproof, and unbelievably compact LED floodlights that are an all-round solution for so many different applications. Use them as side lights on your boat, 4WD or caravan, permanently mount them on your tinny as night fishing lights or navigation lights, use them for deck lighting - we're sure you get the idea! Made from die cast aluminium alloy with an anodised polyester powder coat, 316 grade stainless steel hardware, a near unbreakable lexan polycarbonate lens, and featuring an IP68 rating and UV shielding, they are more than capable of handling whatever situation you throw them into. Operated from 10-36VDC, and available in either spot or flood beam patterns. IP68 waterproof Shock proof 50,000 hour life Instant ON/OFF Beam pattern: Flood Beam distance: 50m Lumen output: 498 Equivalent halogen lamp: 35W Input current: 0.3A (12VDC), 0.16A (24VDC) Operating temp: -40 Degrees C - 60 Degrees C Dimensions (mounted): 70(H) x 40(W) x 55(D)mm
TechBrands Automotive Multi-Function Circuit Tester with LCD
143.9 AUD
Designed to test the electrical system of an automotive vehicle running on 12V or 24V. One of the great features is being able to activate components with positive or negative without using a jumper wire. This would, for example, allow you to send voltage to a relay that controls whether or not a fan switches on. You can quickly test the voltage and polarity of a circuit or whether it's short or open, check continuity, locate cylinders which are misfiring, measure frequency of ignition pulses, test solenoids, lights and more. To top it all off the easy to read LCD is backlit so it's perfect for the dark crevices of an engine bay. All the features of a brand name unit at a fraction of the price. DC Voltage Ranges : 12.0V, 24.0V Display Type : LCD Display Backlight : LED Backlit Length : 240.0mm Width : 40.0mm Height : 78.0mm Connection to meter : Hard Wired Led Indicator Display : true
TechBrands Converter Car Lighter w/ USB Charge (5A 24V-12V DC-DC)
173.9 AUD
For those with a 24V vehicle such as a truck or bus, finding accessories like chargers and power supplies that run off 24V can be near impossible. This handy device solves that problem by converting 24VDC to 12VDC so that you can use normal car accessories designed for 12V vehicles. Connection couldn't be easier, with a cigarette lighter plug for 24V input and a cigarette lighter socket for the 12V output. Maximum rated current is 5A, which is enough for most modest car chargers and power supplies. Two 2.4A USB ports are also included to charge Smartphones, Tablets, and other USB powered devices. It has a noise filter built in, and safety features include fuse protection, over-voltage, and current limiting. Features: Converts 24V to 12V Dual USB Ports Built-in noise filter Specifications: Max. Output Current: 5A (Cigarette Socket), 2.4A (USB) Continuous Current: 4A (Cigarette Socket), 2A (USB) No Load Input Current: ≤ 50mA Line Regulation: 0.1% Load Regulation: 0.02% Output Ripple Noise: 100mV (RMS) Efficiency: Over 85% Input Connection: Cigarette Plug with 1m Cable Input Fuse: 5A Glass Fuse DC current rating : 5.0A DC Voltage : 12.0V, 5.0V Length : 100.0mm Width : 75.0mm Height : 35.0mm Cable length : 200.0m Required Voltage : 12.0V, 30.0V Vehicle Connection : Cigarette Lighter Output Type : Cigarette Lighter, USB Type A Output Connection : Socket Number of Outputs : 3.0pc Type of converter or transformer : DC to DC
TechBrands 110 Piece Rotary Tool Set w/ PSU and Case (12000RPM 12V)
113.9 AUD
Drill, saw, sand, polish, carve or grind in your workshop or out on the road. 100+ bits and attachments cover every possible task you'll ever need. The rotary tool is rated for 12V at 12,000 RPM. Ideal for hobby or professional use. Rotary tool: 12VDC, 16W, 12,000 RPM Features: Sanding belts 3 x 6mm Sanding belts 3 x 12mm Polishing wheel 4pcs felt wheel 4pcs HSS cutter 6pcs diamond cutter 8 x silicon carbide grinding wheel HSS drills: 2.4, 1.6, 2 x 3.2mm 10 x cut off wheel 36 x sanding disc 2 x brass wire brush 1 x silicon carbide dressing stone Collets and arbours for all attachments Case size: 320(L) x 210(W) x 60(D)mm RPM Level : 12000.0RPM Length : 320.0mm Width : 210.0mm Depth : 60.0mm Power Tool type : Rotary Tool
TechBrands Floodlight LED High Power (IP68 12-24V White)
189.9 AUD
Why would you ever buy halogen or HID spotlights again? These LED lights output over 3400 lumens of brilliant white light - that's more light than a 300W halogen! They are also completely shockproof, waterproof (IP68), rust proof, shatterproof, last for 50,000 hours, draw a measly 34W, turn on instantly, have a beam throw of up to 183m, work off 12VDC or 24VDC, and can handle pretty extreme temperatures without fuss. A must have for any serious 4WD bull bar or roll bar, or for any other application where extreme ruggedness and blinding brightness are desired. Fitted with marine grade 316 stainless steel fasteners. Features: - IP68 waterproof - Shockproof - 50,000 hour life - Equivalent light to a 300W halogen Specifications Beam pattern: Flood Beam distance: 183m Lumen output: 3486 Equivalent halogen lamp: 300W Input current: 2.4A (12Vdc), 1.2A (24Vdc) Operating temp: -40 Degrees C ~ 60 Degrees C Dimensions (mounted): 120(Dia.) x 82(D)mm (excluding bracket)
TechBrands Classic Single Trumpet Style Horn (12V)
163.9 AUD
Made in 100% marine 316 grade stainless steel including fittings. Would look great on your runabout or cruiser. Classic Trumpet Horn - 12V Measures 390(L) x 100(dia)mm 110dB at 12V, 3.5 amps
TechBrands Low Voltage Circuit Tester 6-12 & 24 Volts
25.9 AUD
Looks like a neon test screwdriver but instead of a blade on the end this tester has a probe and a 28 lead which clips to the ground. Suitable for cars, trucks, boats, etc. Looks like a neon test screwdriver but instead of a blade on the end this tester has a probe and a 28 lead which clips to the ground Suitable for cars, trucks, boats, etc. DC Voltage Ranges : 6.0V, 12.0V, 24.0V
TechBrands Electric Winch with Remote (12V 1500lb)
253.9 AUD
Remove the need for back-breaking sweat-inducing winch winding. Ideal for small boats, personal watercraft, etc, and other loads up to the rated 1500lb (680kg) capacity. It includes a wired remote control for safe operation. A 12m cable with heavy duty hook means you can hook up early and let the winch do the work. Requires 12VDC power with battery-clamps supplied. Can also be used for mild recovery / pulling work within rated loads. Features: 1500lb / 680kg Cabled remote control Pull boats, vehicles, and other heavy items Capacity: 1500lb (680kg) Pulling Capacity Cable Length: 12m Power Supply: 12VDC Dimensions: 285(W) x 105(H) x 105(D)mm Weight: 28kg Width : 285.0mm Height : 105.0mm Depth : 105.0mm
TechBrands 2 Pin Waterproof Socket 3A (12V)
68.9 AUD
If you only have limited space in the cavity between outside panel and inside lining panel, this could be for you. One of these gives you 13mm of extra space. If you need even more space, you could even double-up the flange (2) to 26mm. May be an idea to screw the flanges together with countersunk self-tappers (No. 6) to keep them aligned. Surface Mount Spacer Depth : 13mm Also available: TEV256: 20mm Surface Mount Spacer
TechBrands 2-Pin Waterproof Connector 12V 3A
43.9 AUD
A replacement plug for the TPE076 plug and socket combination. Packaged Length : 7.5cm Packaged Width : 4cm Packaged Height : 2.5cm
TechBrands Reversible Gearhead Motor (12V) - 70RPM
55.9 AUD
Compact reversible DC motor with gearbox head for small scale applications. Suitable for small robotics and drive applications. Operating Voltage 12VDC At Stall: Torque: 2.1kg.cm Current: 350mA DC Voltage : 4.5V, 18V Item connection : Solder Tags Type : Planetary/Orbital Gear Ratio : 82:1 Pre-assembled Gear : true Motor Type : Gearhead Motor Nominal Voltage : 12V No load current : 30mA No load RPM : 70RPM Full load current : 390mA Full load torque : 2.1kg.cm Max efficiency : 49.3% Max efficiency power : 1.3W Max efficiency RPM : 59RPM Maximum efficiency torque : 480g.cm Max. efficiency current : 110mA Shaft diameter : 4mm Shaft length : 8.8mm
TechBrands Reversible Gearhead Motor (12V) - 55RPM
89.9 AUD
High power reversible DC motor with gearbox head for heavy duty applications. Suitable for larger mechatronics projects or as a replacement motor for simple machines. Capable of producing a massive 50kg/cm torque at 55RPM at load and upto 160RPM at No Load. DC Voltage : 6V, 12V Item connection : Solder Tags Type : Planetary/Orbital Gear Ratio : 50:1 Pre-assembled Gear : true Motor Type : Gearhead Motor Nominal Voltage : 12V No load current : 450mA No load RPM : 160RPM Full load current : 18A Full load torque : 75kg.cm Max efficiency : 44% Max efficiency power : 16.3W Max efficiency RPM : 134RPM Maximum efficiency torque : 11.84kg.cm Max. efficiency current : 3.2A Shaft diameter : 6mm Shaft length : 12mm
TechBrands Blue Siren/Strobe (12V 120dB)
51.9 AUD
Combined 120dB siren and strobe for alarm systems. Works from standard NO alarm outputs. Length : 120.0mm Width : 72.0mm Height : 42.0mm
TechBrands 12V Inflator Air Pump Car Lighter (Black)
69.9 AUD
Economical but high capacity 12 volt pump suitable for airbeds, inflatable pools, etc. that require large volumes of air at modest pressure. It will also deflate. It is driven from a cigarette lighter socket, so you will need access to a vehicle, or a cig lighter socket to battery clips (Cat. TEP505). If you have no 12V power, consider the MWA622 Supplied with 2 adaptor nozzles Airflow/pressure: 679lpm at 0.54PSI Noise: Dimensions: 245(L) x 130(W) x 165(H)mm Power: 12V @ 100W Length : 245.0mm Width : 130.0mm Height : 165.0mm
Powertech Dual Battery Solar Charge Controller (12V or 24V)
147.9 AUD
We have many solar battery charger controllers - up to 50A - but they only work on one battery bank. This unit will charge TWO house battery banks or one house bank and your motor start battery as well. Too often the motor start battery is forgotten if you are camped in the one spot for a long time. Will charge 2 completely separate battery banks at the same time Highly efficient PWM (Pulse-width modulation) charging system Electronic protection from over charging short circuit or accidental reverse battery connection Max solar input voltage: 30V (12V system), 55V (24V system) Battery input voltage range: 8-15V (12V system), 8-30V (24V system) Overnight self-consumption: 4mA Recommended solar panel to utilise output of this controller. ZM9059, 8.3A unit. (Note output of this controller is limited by the current output of the solar panel feeding it).
TechBrands Boat Bilge Pump (Rule 10 2000GPH 12V)
591.9 AUD
These high capacity pumps are built to industrial standards. They are built for boats that are generally permanently moored, and are at least 30 foot long. Boats over 40 foot long often have 24V electrics so we stock a 24V version of the RULE 2000. Even if you get your boat serviced by professionals, it is still not a bad idea to carry a spare bilge pump. The 24V RULE 2000 is the most commonly used 24V bilge pump in Australia. All include a snap-on strainer base and mounting hardware is provided. Work with all float switches in RTM range. Fully submersible Teflon seals and stainless shaft Ignition protected 28mm (1-1/8”) hose outlet 152(W) x 108(H)mm 2000 GPH, 126 LPM 12VDC, 8.4A
TechBrands 12V Monocrystalline Solar Panel with Clips/Lead - 20W
161.9 AUD
High quality solar panel with high efficiency and smaller footprint compared to our regular monocrystalline models. An easy way to keep your 12V batteries topped up and ready to go on your caravan, farm equipment, the spare car, or on the shed out the back. The dust and weather resistant panel features a robust frame, and is supplied with 3m long leads terminated with battery clips. Fitted with a blocking diode making them suitable for direct connection to your battery as a trickle charger (take note of the minimum battery capacity), or as a low current charger to replace a load or current drain on the battery. A charge controller is recommended to prevent over-charging of the battery when the panel output exceeds the routine circuit load. DC Voltage : 12.0V Maximum Power : 20.0W Width : 520.0mm Height : 360.0mm Depth : 30.0mm Weight : 2.5kg Solar panel type : Monocrystalline Open Circuit Voltage : 22.0V Short Circuit Current : 1.21A Voltage at Power Max : 17.4V Current at Power Max : 1.16A Power Connector : Alligator Clips
TechBrands Fixed Mount Fold-down Pole Light (12V) - 600mm
63.9 AUD
Fixed Mount Fold-down Pole Light (12V) - 600mm Like MLG205 but larger and capable of folding down to deck to clear a boat cover, etc. Diffuse fitting 45(dia)mm (max) Total shroud 55(dia)mm
TechBrands Fixed Mount Fold-down Pole Light (12V) - 265mm
58.9 AUD
Fixed Mount Fold-down Pole Light (12V) - 265mm Like MLG205 but larger and capable of folding down to deck to clear a boat cover, etc. Diffuse fitting 45(dia)mm (max) Total shroud 55(dia)mm
TechBrands TMC Inline 12V Bilge Blower 75mm
101.9 AUD
Economical bilge blower suitable for inline connection with ducting. 75mm (3in) ducting connection and 12V power suitable for many marine or RV applications 12V 4.5A 3.45m³/min
TechBrands Auto Boat Bilge Pump (LP900S LoPro 900GPH 12V suit RWB5159)
389.9 AUD
This non-automatic low profile bilge pump features full rotation discharge with non-return valves making it the best choice of pump for tight areas. Includes: 3/4" (19mm) straight and elbow hose barbs 1" (25mm) straight hose barb 1 1/8" (28mm) hose barb Specifications: Input Power: 12VDC at 4A Flow Rate: up to 3300 litres per hour Dimensions: 60(H) x 228(W) x 60(D)mm Width : 228.0mm Height : 60.0mm Depth : 60.0mm
TechBrands Pre-connected Cable Mini Lamp (4x10mm) - 12V Yellow
22.9 AUD
A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. LARGE SIZE White 1.5v: SL2670 Red 3v: SL2671 Blue 6v: SL2673 Green 9v: SL2674 Yellow 12v: SL2675 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 12V Length : 10mm Diameter : 4mm Cable length : 150mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 15cm Packaged Width : 0.4cm Packaged Height : 0.4cm Globe Current : 100mA
TechBrands Pre-connected Cable Mini Lamp (3x7mm) - 12V Yellow
22.9 AUD
SMALL SIZE Globe size A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. 1.5V White: SL2680 3V Red: SL2681 6V Blue: SL2683 9V Green: SL2684 12V Yellow: SL2685 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 12V Length : 7mm Diameter : 4mm Cable length : 100mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 11cm Packaged Width : 0.3cm Packaged Height : 0.3cm Globe Current : 100mA