TechBrands ABS Access Hatch - 315x440mm
169.9 AUD
Consult the complete sheet with detailed information, compare prices and identify the features of TechBrands ABS Access Hatch - 315x440mm, available at the cost of 169.9 AUD; it belongs to the Car Parts, Accessories and Styling category; the seller is TechBrands ABS Access Hatch - 315x440mm and the manufacturer is TechBrands.
A low profile hatch, designed for installation on internal or external flat surface. Constructed from heavy duty, UV stabilised white ABS material with weatherproof rubber seals, this is made to last and withstand the harsh sea environment. The reinforced lid has a non-skid surface; it hinges 180° and completely cover the mounting flange for a flush finish. Supplied with strong recessed handle. Easy to install, pre-drilled countersunk fastening holes (screws not included).
EAN: 9319236525012
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
A low profile hatch, designed for installation on internal or external flat surface. Constructed from heavy duty, UV stabilised white ABS material with weatherproof rubber seals, this is made to last and withstand the harsh sea environment. The reinforced lid has a non-skid surface; it hinges 180° and completely cover the mounting flange for a flush finish. Supplied with strong recessed handle. Easy to install, pre-drilled countersunk fastening holes (screws not included).
EAN: 9319236525012
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
TechBrands ABS Access Hatch - 270x375mm
109.9 AUD
A low profile hatch, designed for installation on internal or external flat surface. Constructed from heavy duty, UV stabilised white ABS material with weatherproof rubber seals, this is made to last and withstand the harsh sea environment. The reinforced lid has a non-skid surface; it hinges 180° and completely cover the mounting flange for a flush finish. Supplied with strong recessed handle. Easy to install, pre-drilled countersunk fastening holes (screws not included).
TechBrands Economy Access Hatch - 520x270mm
209.9 AUD
Made from durable and UV resistant ABS plastic.
TechBrands Telescopic Hatch Support (250-475mm)
63.9 AUD
Chrome plated brass telescopic hatch adjusters with positive locking nut. One end swivels and the other end pivots, allowing a variety of installation positions.
TechBrands 3AB or 3AG Ceramic Fuse (500V) - 10A
26.9 AUD
As used in multimeters. Fast acting fuse designed for use in circuits with high AC fault current capacity. Listed by Underwriters Laboratories and certified by CSA.
TechBrands 3AB or 3AG Ceramic Fuse (500V) - 0.5A
21.9 AUD
As used in multimeters. Fast acting fuse designed for use in circuits with high AC fault current capacity. Listed by Underwriters Laboratories and certified by CSA.
TechBrands Clear Acrylic Enclosure for Arduino UNO with GPIO Access
20.9 AUD
Protect your Arduino Uno board against damage, dust and scratches with this clear acrylic enclosure. The case is easy to assemble and has been pre-drilled to provide easy access to all ports. Specifications Content Pathway : Bronze Vendor/Product Type : Offshore OEM Supplier (most items) Sample Availability : Available CM Key Features : - Clear Acrylic case for UNO - Provides excellent protection - with access to pins Existing Content Sources : None Copy Writing Assignment : Limeworks Specification Entry Assignment : JEG - Silvester Molnar Photgraphy Creation / Image Collection Assignment : Limeworks Packaging Creation / Amendment Assignment : Not Applicable Manual Creation / Amendment Assignment : Supplier Content Source Press Release Assignment : Not Applicable Genesis Certification Requirement : Not Required Certification Collection Assignment : Not Applicable Arrival I
TechBrands ABS Solar Panel Mounting Brackets Pair (White) - Spoiler
131.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Spoiler Mounts 510mm, HS-8864 Specifically designed to deflect wind on solar panel edges that face into high winds, such as the leading edge of solar panels mounted on caravan or RV rooftops. Well matched to 80W and 90
Midjiwan AB The Battle of Polytopia - Aquarion Tribe PC - DLC
1.79 AUD
This product includes The Battle of Polytopia - Aquarion Tribe PC - DLC(Base game required) The top 3 reasons to play The Battle of Polytopia - Aquarion Tribe PC - DLC The Aquarion have a unique relationship with the water that other tribes don’t have. While they still have access to the standard naval units, the Aquarion have new units that excel in amphibious hit and run tactics The Amphibian, Tridention, and Crab all have Escape, meaning they are very hard to pin down when near a coast, as they can simply retreat away from enemy attacks Since Aquarion terrain is full of water, they are able to get out onto the seas very easily! About The Battle of Polytopia - Aquarion Tribe PC - DLC Aquarion is Polytopia’s first Special Tribe! Having risen from the depths of the ocean to fight in Square-wide struggle, the underwater-breathing, fish-like Aquarion have summoned their aquatic allies to take dominion over their land-dwelling kin. Unlike the other tribes, the Aquarion have a unique style
TechBrands ABS Flameproof Backshell (Grey) - DB15
19.9 AUD
Top quality grey back shells with two cable entries for DB15 (15pin). - Either rear or side entry. - Simply push out the tab required. - Supplied with 2 long finger screws, cable clamp screws and hood fixing screws.
TechBrands ABS Solar Panel Corner Mounting Brackets White (4pk)
109.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Corner Mounts set of 4, HS-8860 A set of four corner mounts, to attach each corner of your solar panel to your desired mounting surface. These can be used on their own for solar panels 40W or smaller.
TechBrands ABS Solar Panel Mounting Brackets Pair (White) - Side
71.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Side Mounts, 180mm, HS-8862 This pair of side mounts are intended to be attached to the long edge of taller solar panels, such as 80W and above, adding extra mounting strength and giving more wind deflection.
TechBrands Plastic Rectangular Louvre Vent (Black) - 200x100mm
23.9 AUD
Black ABS for natural ventilation in cupboards, behind built-in fridges, compressors, etc.
TechBrands Plastic Rectangular Louvre Vent (Black) - 255x125mm
27.9 AUD
Black ABS for natural ventilation in cupboards, behind built-in fridges, compressors, etc.
TechBrands Stainless Steel Top Mount Handrail (25x335mm)
59.9 AUD
These handrails feature mounting feet that have countersunk holes (No. 10) when you do not have access to the other side. Beautifully welded
TechBrands Deck Plate or Inspection Cover (Black) - 100mm
37.9 AUD
Made from UV resistant ABS plastic. Have screw-in lids with ""O"" ring seal Requires 6 x No.8 countersunk screws Overall diameter: 145mm Deck cutout: 112mm Inspection hole size: 100mm
TechBrands Deck Plate or Inspection Cover (White) - 150mm
50.9 AUD
Made from UV resistant ABS plastic. Have screw-in lids with ""O"" ring seal Requires 6 x No.8 countersunk screws Overall diameter: 217mm Deck cutout: 162mm Inspection hole size: 155mm
TechBrands Deck Plate or Inspection Cover (White) - 100mm
37.9 AUD
Made from UV resistant ABS plastic. Have screw-in lids with ""O"" ring seal Requires 6 x No.8 countersunk screws Overall diameter: 145mm Deck cutout: 112mm Inspection hole size: 100mm
TechBrands Snap in Enclosure (91x122x69mm) - Grey
32.9 AUD
Available in light grey and black colours, these range of enclosures are made of high impact resistant ABS plastic that can withstand wide range of temperature and humidity fluctuations. All comes with snap-in design, and can be opened and closed easily without using any tools. The rubber of the cable entry can be cut by knife easily for the cable connection. Four internal bosses are also available for pcb assembly
TechBrands Snap in Enclosure (91x79x45mm) - Grey
25.9 AUD
Available in light grey and black colours, this range of enclosures are made of high impact resistant ABS plastic that can withstand a wide range of temperature and humidity fluctuation. All come with snap-in design, and can be opened and closed easily without using any tools. The rubber of the cable entry can easily be cut by knife for the cable connection. Four internal bosses are also available for pcb assembly.
TechBrands Snap in Enclosure (91x79x45mm) - Black
25.9 AUD
Available in light grey and black colours, these enclosures are made of high impact resistant ABS plastic that can withstand a wide range of temperature and humidity fluctuation. All come with snap-in design, and can be opened and closed easily without using any tools. The rubber of the cable entry can be easily cut by knife for the cable connection. Four internal bosses are also available for pcb assembly.
TechBrands Snap in Enclosure (91x122x69mm) - Black
32.9 AUD
Available in light grey and black colours, this range of enclosures are made of high impact resistant ABS plastic that can withstand a wide range of temperature and humidity fluctuation. All come with snap-in design, and can be opened and closed easily without using any tools. The rubber of the cable entry can easily be cut by knife for the cable connection. Four internal bosses are also available for pcb assembly.
TechBrands Flashforge Guider IIS 3D Printer (Extra Large)
4607.9 AUD
THe Flashforge Guider IIs has an upgraded extruder which can be heated up to 300Deg, and a max print speed of 100mm/s. It gives you access to print with a wide varity of PLA, PVA and advanced filament such as PETG, TPU, ABS, Nylon, HIPS, PA, PC, wood, electrically conductive materials, flexible material. The Guider IIs' platform can print at a max dimension of 280 X 250 X 300mm 3D models, meaning you can print large whole 3d model or print multiple parts at the same time. The unit is enclosed in a sturdy 38kg full-metal frame which its design allows the print head to move steadily & quietly, ensuring consistent 3d printing every time. The bed auto-leveling system ensures the platform is level before the print. The extruder then adjusts the minor distance between the print nozzle and platform to create a uniform and smooth build surface, which highly improves the platform adhesion and print quality. Features: Out of the box: pre-built 3d printer, start 3d
TechBrands Deck Plate or Inspection Cover (Black) - 125mm
43.9 AUD
Made from UV resistant ABS plastic. Have screw-in lids with ""O"" ring seal Requires 6 x No.8 countersunk screws Overall diameter: 172mm Deck cutout: 137mm Inspection hole size: 127mm
TechBrands Deck Plate or Inspection Cover (Black) - 150mm
50.9 AUD
Made from UV resistant ABS plastic. Have screw-in lids with ""O"" ring seal Requires 6 x No.8 countersunk screws Overall diameter: 217mm Deck cutout: 162mm Inspection hole size: 155mm
TechBrands DIN Rail Enclosure with Clear Lid (6 Unit)
52.9 AUD
This enclosure is made of light-grey ABS and has a clip to attach it to a standard DIN rail. We've found it's the perfect size for an Arduino Uno or even a Raspberry Pi, and will make a perfect way to protect and mount projects based around Arduino and Raspberry Pi. Includes a clear lid for a diagnostic display or even some indicator LEDs. Features: - 6U DIN rail mounting - Measures 95mm x 106mm x 58mm including clip - Side knockouts for terminal connections
TechBrands Battery Holder 150mm (Black) - 1x18650
19.9 AUD
Ideal for Arduino projects or any on-board power storage applications. Includes 150mm leads so it is suitable for case mounting too. Features: - Secure Mounting of One 18650 Battery - 150mm Leads - ABS Plastic
TechBrands Switched Battery Enclosure with 2.1mm DC Plug (4xAA)
21.9 AUD
The holders are moulded in Delryn with corrosive resistant nickel plated springs and studs. - We can supply OEM quantities of holders with special configuration. - High quality ABS holder with on/off switch and sliding cover - Includes 2.1mm DC Plug (centre positive)
TechBrands Battery Holder 150mm (Black) - 2x18650
20.9 AUD
Ideal for Arduino projects or any on-board power storage applications. Includes 150mm leads so it is suitable for case mounting too. Features: - Secure Mounting of Two 18650 Batteries - 150mm Leads - ABS Plastic
TechBrands Deck Hatches (White) - 560x560mm
1127.9 AUD
Made to the same standards as the MHG305/MHG310, but for horizontal mounting as hatches. All are fitted with airsprings, very sturdy locking handles and sealing gaskets that have no joins. Another feature of these units is that when the hatch is closed (i.e. 90% of the time), the mounting screws are covered by the hatch itself. This helps prevent the screw from being a source of a water leak. Thoughtful.
TechBrands Keystone Surface Box (White) - Single
19.9 AUD
Side entry surface mount boxes to accept our standard keystone 110 jacks. Snap-on cover for easy installation and access to wiring. Single and duplex versions available. Double sided tape included for easy installation. Supplied unloaded without keystone jacks. Colour is white
TechBrands Lock Insert for C13 Outlet to C14 Plug Leads
23.9 AUD
Prevent accidental disconnection of C14 plug-in power cords from C13 output receptacles. Place a Plug-lock insert over any C14 input cord and connect it to any C13 outlet. The insert strengthens the connection of the plug to the outlet, keeping critical equipment plugged-in and running during routine rack access and maintenance. Supplied as a packet of 5 (3 blue + 2 red). Features: - Prevent accidental disconnection of C14 plug-in power cords from C13 outlets - Corrects loose-fitting IEC60320 power connections - Keep vital network equipment plugged in and running - Pull tabs enable safe retraction of the insert - High strength PA66 nylon UL94 material with V2 flame rating
TechBrands Keystone Surface Box (White) - Double
19.9 AUD
Side entry surface mount boxes to accept our standard keystone 110 jacks. Snap-on cover for easy installation and access to wiring. Single and duplex versions available. Double sided tape included for easy installation. Supplied unloaded without keystone jacks. Colour is white
TechBrands Turn Button Fastener Eyelet and Washer
27.9 AUD
Simple and durable for low-stress fastening of covers, clears, etc. Ideal for hatch covers nickel plated brass with plated steel spring
TechBrands Illuminated Polarity Sensing DC Connectors 2.1mm
27.9 AUD
Simplifies installation of your CCTV cameras, access control and other security applications. These 2.1mm DC connectors detect and indicate the polarity of your power connections with integrated LEDs. Once connected the LED lights up either blue for centre positive, red for centre negative or purple for AC voltage. They also shine brighter as voltage increases. WQ-7289 - 2.1mm Illuminated Polarity Sensing DC Socket
TechBrands 3D Printer Enclosure (60x48x72cm)
149.9 AUD
Our Protech Universal 3D Printer Enclosure is an insulated, easy to assemble (and disassemble), printing enclosure that allows you to print materials like ABS. Some filament such as ABS require an enclosure to stop the part cooling too fast and warping, Protech's insulated print enclosure allows you to do this safely and effectively, it can be set up and packed away easily to be used only when you need it.
TechBrands Sealed Plastic Box Enclosure Dark Grey (52x50x35mm)
20.9 AUD
Gainta enclosure, made with ABS, moulded in dark grey
TechBrands Grey Insulated Cover for Brass Monkey Portable Fridge 95L
307.9 AUD
Improve the performance of your portable fridge with this insulated fridge cover. Designed with mesh panels for compressor ventillation plus access panels for handles and lid. - SUITS GH1682 Features: Grey Heavy duty insulated cover Pockets to store cables and power supply Clear panel allowing easy view of LCD and temperature controls Tie down points on each corner allows for secure mounting of cover Vents enabling air circulation allowing the compressor to cool down during operation Provides protection and insulation, leading to efficiency and longevity Designed for Brass Monkey 95 litre fridges
LatestBuy White Baggage Door Catch (2 Packs)
25.9 AUD
These spring loaded door catches hold RV baggage and access compartment doors open, so you have easy access while you are loading or unloading. Made from durable ABS plastic and white in colour. Supplied as a pack of two.