TechBrands 12V 1A SLA Battery Charger
67.9 AUD
Browse the detailed sheet with complete information, compare prices and identify the features of TechBrands 12V 1A SLA Battery Charger, offered at the cost of 67.9 AUD; it belongs to the Car Parts, Accessories and Styling category; the seller is TechBrands 12V 1A SLA Battery Charger and the manufacturer is TechBrands.
A mains powered Lead Acid battery charger designed for 12V batteries. Features intelligent automatic charge controller to stop charging when the battery is full and maintain the battery with a 'floating' charge mode. This feature allows you to leave the charger connected to the battery without risk of overcharging and know your battery is always ready to go. Includes a 2m long cable with interchangeable DC plug and Alligator clips. NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. Float output voltage: 14.4V Bulk charge mode voltage: 14.4V Suitable for: jet skis and small motor bikes Length : 70.0mm Width : 40.0mm Depth : 40.0mm Cable Length : 2.0m Mains Voltage Range : 100.0V, 240.0V Frequency : 50.0Hz Rated for AU Mains : true Rated for US Mains : true Auto-select mains voltage : true Mains Item connection : Mains AU/NZ 3 Pin Type of Batteries : Sealed Lead Acid (SLA), Deep Cycle SLA, Deep Cycle Gel Cell, Lead Acid Charger Output Voltage : 12.0V Charger Output Current : 1.0A Controller Type : Multi-Stage Connection Type : Alligator Clips
EAN: 9319236455074
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
A mains powered Lead Acid battery charger designed for 12V batteries. Features intelligent automatic charge controller to stop charging when the battery is full and maintain the battery with a 'floating' charge mode. This feature allows you to leave the charger connected to the battery without risk of overcharging and know your battery is always ready to go. Includes a 2m long cable with interchangeable DC plug and Alligator clips. NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. Float output voltage: 14.4V Bulk charge mode voltage: 14.4V Suitable for: jet skis and small motor bikes Length : 70.0mm Width : 40.0mm Depth : 40.0mm Cable Length : 2.0m Mains Voltage Range : 100.0V, 240.0V Frequency : 50.0Hz Rated for AU Mains : true Rated for US Mains : true Auto-select mains voltage : true Mains Item connection : Mains AU/NZ 3 Pin Type of Batteries : Sealed Lead Acid (SLA), Deep Cycle SLA, Deep Cycle Gel Cell, Lead Acid Charger Output Voltage : 12.0V Charger Output Current : 1.0A Controller Type : Multi-Stage Connection Type : Alligator Clips
EAN: 9319236455074
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
TechBrands Victron Automotive IP65 Battery Charger (6V/12V-1.1A)
205.9 AUD
Thanks to its seven-step charging algorithm, this professional smart charger maintains the health of your 12V lead-acid or Lithium batteries, and helps provide better performance and a longer battery life. A force-fed low current function can also recover some deeply-discharged 'dead' lead-acid batteries, which can save you the expense of buying a replacement. Built-in LEDs and one-button operation sets and shows the charging status and battery condition. Alternatively, the active charge status and operation can be set and checked in real-time via a Bluetooth enabled Smartphone, tablet or laptop. A graphical view and historical usage statistics can be viewed for the past 40 charge cycles, and expert settings can be set for optimum charging. The charger's IP65 splash and dustproof rating makes it ideal for use in workshops, and safety features protect against reverse polarity, short circuits, and over-temperature. Supplied with 1.5m long lead with protected battery clamps or M6 eye terminals for temporary or permanent applications. In addition, the charger can also double as a power supply to power 12V devices in the workshop with or without a battery connected. Mains powered. Charging modes: 1. Test/Charge 2. Bulk 3. Absorption 4. Recondition 5. Float 6. Storage 7. Refresh FEATURES: - Supports Lead-acid and LiFePO4 12V batteries - IP65 rated - Bluetooth connectivity - Android, iOS/Mac compatible App - High efficiency & Silent Operation Four models to choose from: MB3950: 12V 5A. Supports lead-acid batteries from 7Ah to 50Ah or Li-ion batteries from 4Ah to 50Ah. MB3952: 12V 7A. Supports batteries from 7Ah up to 70Ah or Li-ion batteries from 4Ah to 70Ah. MB3954: 12V 10A. Supports batteries from 10Ah up to 100Ah or Li-ion batteries from 6Ah to 100Ah. MB3956: 12V 25A. Supports batteries from 33Ah up to 250Ah or Li-ion batteries from 20Ah to 250Ah. MB3958: 6V/12V 1.1A. Supports batteries from 20Ah up to 50Ah or Li-ion batteries from 20Ah up to 50Ah. SPECIFICATIONS: Charge Voltage: - Absorption: Normal: 7,2 V 14,4 V High: 7,35 V 14,7 V Li-ion: 7,1 V 14,2 V - Float: Normal: 6,9 V 13,8 V High: 6,9 V 13,8 V Li-ion: Disabled - Storage: Normal: 6,6 V 13,2 V High: 6,6 V 13,2 V Li-ion: 6,75 V 13,5 V Note: This item requires Australian Standard 230V / 50Hz mains power supply to operate. Please check your local power supply to ensure that this item will work in your country. Adapters and transformers may be required and are not included. IP Rating : IP65 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 5 - Water jets Length : 182mm Width : 81mm Height : 45mm Weight : 900g Mains Voltage Range : 220V, 250V Frequency : 50Hz, 50Hz Mains Max Current : 0.6A Packaged Volume : 2.93l Packaged Weight : 1kg Packaged Length : 28cm Packaged Width : 19cm Packaged Height : 5.5cm Type of Batteries : AGMDeep Cycle Gel CellSealed Lead Acid (SLA) Charger Output Voltage : 7.2V, 14.4V Charger Output Current :...
TechBrands Battery, Charger and Alternator Tester 12V
42.9 AUD
A nifty device to quickly indicate the condition of your 12V battery, charger or alternator. 3 LEDs to indicate battery and charge under engine on/engine off conditions. Compact, lightweight, Includes 600mm leads with croc clips Inbuilt magnet to secure the unit while taking measurements. Dimensions: 120(L) x 33(W) x 20(D)mm
TechBrands Intelligent 6V/12V/24V 15A Battery Charger
368.9 AUD
An intelligent battery charger suitable for flooded and gel lead acid batteries including deep cycle batteries at 6V, 12V or 24V. The microprocessor controlled unit provides 4 stages of charging, Soft Start, Bulk Charge, Absorption and Float which assists in the batteries life expectancy and performance. An auto detection feature provides a user friendly experience, which can be pre-programmed or manually set for greater control. Should a blackout occur or AC input power be lost during a charging operation the memory function will resume charging once power is re-established. Other features include temperature/voltage compensation, reverse polarity/short circuit protection and a battery status indicator. Ideal for cars, motorcycles, caravans and boats with battery capacities between 20-200Ah. It's also ultra-portable with a handy storage pocket in the back for the leads. NOTE: These chargers are not recommended for long-term "maintenance" charging of unsealed lead-acid batteries, the types with removable filler caps and liquid elctrolyte. Long-term continuous float charging of this type of battery may cause loss of water from the electrolyte, ruining the battery. If you are intending to use this charger on these batteries please use an appliance timer such as MS6113 to automatically limit the charging to 30 minutes or so per day. Memory function Temperature controlled fan LED battery status display Temperature and voltage compensation Input: 220 240VAC, 300W Output: 15A @ 12V 7A @12V/24V 2A @ 6V/12V/24V Anti spark Short circuit Reverse polarity Over heating/current/voltage Width : 170.0mm Height : 230.0mm Depth : 140.0mm Rated for AU Mains : true AC Voltage : 240.0 Charger Output Voltage : 6.0V, 12.0V, 24.0V Charger Output Current : 2.0A Controller Type : PWM Connection Type : Alligator Clips Reverse Polarity Protection : true
TechBrands 12V Deep Cycle SLA Gel Battery for Solar Installation - 26Ah
335.9 AUD
These add genuine deep-cycle batteries to Jaycar's already substantial range of batteries. As with all gel cells, they can be operated and charged in any position, are leakproof and completely sealed. Gel batteries are ideal for solar power, camping, 4WD, auxilliary applications and anywhere deep discharge and recovery is required. Note: Due to excessive weight this product cannot be shipped by express or air freight and may attract a surcharge when shipped by road freight. Please contact our call centre for details. DC Voltage : 12.0V Width : 166.0mm Height : 125.0mm Depth : 175.0mm Weight : 8.35kg Recharging Voltage : 13.5V, 14.7V Standard Recharge Current : 3.0A Recharging Time : 20.0hr Battery Chemical Composition : Deep Cycle Gel Cell Battery usage : Rechargeable Battery Peak Current : 260.0A Amp Hour Rating : 26.0Ah 20 Hour Capacity : 27.3Ah 10 Hour Capacity : 26.0Ah 5 Hour Capacity : 21.8Ah 1 Hour Capacity : 16.5Ah Connection Type : M5 Bolt/Nut Type of battery : SLA Block Battery Code : DMD12 - 26 GEL
TechBrands 12V Deep Cycle SLA Gel Battery for Solar Installation - 100Ah
574.9 AUD
Deep-cycle gel performance for solar installations and other alternative energy systems. Note: Due to excessive weight this product cannot be shipped by express or air freight and may attract a surcharge when shipped by road freight. Please contact our call centre for details. DC Voltage : 12.0V Width : 330.0mm Height : 223.0mm Depth : 173.0mm Weight : 31.5kg Recharging Voltage : 14.4V, 15.0V Standard Recharge Current : 10.0A Recharging Time : 10.0hr Battery Chemical Composition : Deep Cycle Gel Cell Battery usage : Rechargeable Battery Peak Current : 1000.0A Amp Hour Rating : 100.0Ah 20 Hour Capacity : 102.0Ah 10 Hour Capacity : 100.0Ah 5 Hour Capacity : 81.0Ah 1 Hour Capacity : 58.5Ah Connection Type : M8 Bolt/Nut Type of battery : SLA Block Battery Code : DMD12-100 GEL
TechBrands Battery Discharge 20A M148A Protector Module 12V
105.9 AUD
Protects your car battery from total discharge by switching off appliances such as fridges and TV sets before the battery voltage drops to an unrecoverable level. When battery voltage is re-established by recharging, it switches appliances on automatically. The interrupting voltage is adjustable from 10.4 to13.3 VDC. Essential low-cost insurance if you have a dual battery setup in a boat, 4WD, RV or for an alternative energy system such as solar or wind power. Max. switching current: 20A Interrupting voltage: 10.4 - 13.3VDC Resetting voltage: approx. 0.8V (± 0.3V) above interrupt voltage Current consumption:
TechBrands Solar Trickle Battery Charger (12V 1.5W)
81.9 AUD
Perfect for keeping your boat, car, tractor, motorcycle or any 12v house battery topped up. It includes battery clips and a cigarette lighter adaptor for simple connection, and will mount easily on windshield or dash (suction cups provided). The built in blocking diode prevents any drain on your battery at night. Provides up to 1.5W charging power, which is plenty to prevent idle discharge of your expensive vehicle battery, works even on cloudy days. Features: Trickle charge to compensate for natural battery discharge Cigarette lighter / battery clip option Use with any rechargeable 12V battery Dash/ Windshield mount (suction cups supplied) Power Rating: 1.5W (+-5%) DC Voltage : 1.5V DC Voltage tolerance : 5.0% Width : 125.0mm Height : 335.0mm Depth : 20.0mm Cable length : 2.5m Weight : 470.0g Open Circuit Voltage : 21.0V Short Circuit Current : 107.0A Voltage at Power Max : 17.5V Current at Power Max : 85.7A Power Connector : Alligator Clips
TechBrands AGM Deep Cycle Battery in 330mm Case 12V 120Ah
624.9 AUD
AGM batteries have been the popular choice for many applications over the last 50 years where low cost, reliable and portable power is needed. This 120Ah slimline AGM battery is the same dimensions as our 100Ah battery but with more capacity!! It has an absorbent glass mat (AGM) embedded in the structure of the plates which stops the plates from buckling under heavy discharge current. By helping make the innards of the battery virtually solid, you can mount it in any position, but it is still preferable, of course, to mount the battery upright, even for the sake of convenience of terminal access. These batteries are ideal as house / auxillary batteries for caravans, camper trailers and motorhomes. They also can be used in remote area systems where no power is available. and Note: It is important to not discharge an AGM more than 60% between recharges. Width : 330mm Height : 217mm Depth : 172mm Weight : 31kg DC Voltage : 12V Amp Hour Rating : 120Ah Connection Type : M8 Bolt/Nut
TechBrands Twin Mount Converter (12/24V-2xUSB 5V 3.1A Panel)
58.9 AUD
This two port USB panel mount charger is designed for charging your electronic devices. It has a black housing with a rubber weather-flap cover to protect the USB sockets. Ideal for quickly charging a GPS, iPhone(R), iPod(R), PSP, mobile phones, camera and other digital devices. Designed in the same housing as our range of laser etched auto rocker switches, enabling you to mount them side by side to give a great look to the switch panel in your 4WD, RV, or Caravan etc. Features: Dual USB output 5V, 3.1( Shared between two ports) Fused Easy to install Input: 12VDC - 24VDC Output: 5VDC DC current rating : 3.1A Length : 43.0mm Width : 24.0mm Depth : 40.0mm Vehicle Connection : Cigarette Lighter plug Output Type : USB Type A Output Connection : Socket Number of Outputs : 2.0pc Type of converter or transformer : DC to DC
Powa Beam Dual Lithium Battery Charger with Display
26.9 AUD
Intelligent lithium battery charger that can charge a wide range if lithium batteries and also has the ability to bring them back to life if over discharged! 2x1A fast charging slots (Automatically chooses the most suitable charging current (0.5A/1A) for batteries to maximize battery life) Diaply panel shows charge current & level Convenient micro USB charge port OV activation function, brings overdischarged batteries back to life
TechBrands 48 Step or 7.5 Degrees Stepper Motor (12V)
57.9 AUD
Standard 48 step / 7.5Deg design. Flange mount 3.0mm hardened steel shaft. Specifications: Rated voltage: 12VDC Rated current: 1.1A/phase Phases: 4 Steps per revolution: 48 Stepping angle: 7.5Deg Drive method: Unipolar chopper drive Resistance per winding: 20 ohms Starting frequency: 600pps (max) Holding torque: 700g/cm DC Voltage : 12V Packaged Volume : 0.14l Packaged Weight : 0.09kg Packaged Length : 9cm Packaged Width : 7.5cm Packaged Height : 2cm Motor Nominal Voltage : 12V Max. efficiency current : 1.1A
TechBrands Reversible Gearhead Motor (12V) - 36RPM
55.9 AUD
Mid-range reversible DC motor with gearbox head for simple drivetrain applications. Ideal for driving wheels or other traction devices. Operating Voltage: 12VDC At Stall: Torque: 14kg.cm Current: 1.7A DC Voltage : 4.5V, 18V Item connection : Solder Tags Type : Planetary/Orbital Gear Ratio : 244:1 Pre-assembled Gear : true Motor Type : Gearhead Motor Nominal Voltage : 12V No load current : 70mA No load RPM : 36RPM Full load current : 1.38A Full load torque : 12kg.cm Max efficiency : 65.9% Max efficiency power : 3.8W Max efficiency RPM : 29RPM Maximum efficiency torque : 2.2kg.cm Max. efficiency current : 0.32A Shaft diameter : 5mm Shaft length : 9mm
TechBrands Waterproof LED Flexible Strip Light (1m 12V)
101.9 AUD
Fully waterproof yet flexible, this versatile LED strip is made from an array of 60 ultra high brightness 5050 SMD-type LEDs. Perfect for any outdoor application needing some bright, reliable lighting. Everything's encapsulated in a protective casing to keep the dust and water out. Weatherproof male / female connections are provided for easy installation, simply hook the flylead end to a suitable 12V power source and plug in the strip. Features: Super bright 850 lumens Self-adhesive backing Sold as a single 1m length Can be cut to shorter lengths Light Rating Lumens : 850.0lm IP Rating : IP67 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 7 - Immersion up to 1m LED Connection : SMD LED Type : 5050 SMD LED Quantity : 60.0pc LED replacable : false Illuminated Colour : Cool White Length : 1.0m Width : 13.0mm Height : 5.0mm DC Voltage : 12.0V DC Current Draw : 1.0A Item connection : Flyleads, Barrel Plug Connection Size : 2.1mm Connection Details : Supplied with weatherproof 2.1mm DC plug and matching socket flylead, DC plug can be joined to DC plug on PSU output with suitable adaptor (sold separately) Mounting Method : Self Adhesive
TechBrands Converter Car Lighter w/ USB Charge (5A 24V-12V DC-DC)
173.9 AUD
For those with a 24V vehicle such as a truck or bus, finding accessories like chargers and power supplies that run off 24V can be near impossible. This handy device solves that problem by converting 24VDC to 12VDC so that you can use normal car accessories designed for 12V vehicles. Connection couldn't be easier, with a cigarette lighter plug for 24V input and a cigarette lighter socket for the 12V output. Maximum rated current is 5A, which is enough for most modest car chargers and power supplies. Two 2.4A USB ports are also included to charge Smartphones, Tablets, and other USB powered devices. It has a noise filter built in, and safety features include fuse protection, over-voltage, and current limiting. Features: Converts 24V to 12V Dual USB Ports Built-in noise filter Specifications: Max. Output Current: 5A (Cigarette Socket), 2.4A (USB) Continuous Current: 4A (Cigarette Socket), 2A (USB) No Load Input Current: ≤ 50mA Line Regulation: 0.1% Load Regulation: 0.02% Output Ripple Noise: 100mV (RMS) Efficiency: Over 85% Input Connection: Cigarette Plug with 1m Cable Input Fuse: 5A Glass Fuse DC current rating : 5.0A DC Voltage : 12.0V, 5.0V Length : 100.0mm Width : 75.0mm Height : 35.0mm Cable length : 200.0m Required Voltage : 12.0V, 30.0V Vehicle Connection : Cigarette Lighter Output Type : Cigarette Lighter, USB Type A Output Connection : Socket Number of Outputs : 3.0pc Type of converter or transformer : DC to DC
Powertech Dual Battery Solar Charge Controller (12V or 24V)
147.9 AUD
We have many solar battery charger controllers - up to 50A - but they only work on one battery bank. This unit will charge TWO house battery banks or one house bank and your motor start battery as well. Too often the motor start battery is forgotten if you are camped in the one spot for a long time. Will charge 2 completely separate battery banks at the same time Highly efficient PWM (Pulse-width modulation) charging system Electronic protection from over charging short circuit or accidental reverse battery connection Max solar input voltage: 30V (12V system), 55V (24V system) Battery input voltage range: 8-15V (12V system), 8-30V (24V system) Overnight self-consumption: 4mA Recommended solar panel to utilise output of this controller. ZM9059, 8.3A unit. (Note output of this controller is limited by the current output of the solar panel feeding it).
TechBrands 12V Monocrystalline Solar Panel with Clips/Lead - 20W
161.9 AUD
High quality solar panel with high efficiency and smaller footprint compared to our regular monocrystalline models. An easy way to keep your 12V batteries topped up and ready to go on your caravan, farm equipment, the spare car, or on the shed out the back. The dust and weather resistant panel features a robust frame, and is supplied with 3m long leads terminated with battery clips. Fitted with a blocking diode making them suitable for direct connection to your battery as a trickle charger (take note of the minimum battery capacity), or as a low current charger to replace a load or current drain on the battery. A charge controller is recommended to prevent over-charging of the battery when the panel output exceeds the routine circuit load. DC Voltage : 12.0V Maximum Power : 20.0W Width : 520.0mm Height : 360.0mm Depth : 30.0mm Weight : 2.5kg Solar panel type : Monocrystalline Open Circuit Voltage : 22.0V Short Circuit Current : 1.21A Voltage at Power Max : 17.4V Current at Power Max : 1.16A Power Connector : Alligator Clips
TechBrands Auto Boat Bilge Pump (LP900S LoPro 900GPH 12V suit RWB5159)
389.9 AUD
This non-automatic low profile bilge pump features full rotation discharge with non-return valves making it the best choice of pump for tight areas. Includes: 3/4" (19mm) straight and elbow hose barbs 1" (25mm) straight hose barb 1 1/8" (28mm) hose barb Specifications: Input Power: 12VDC at 4A Flow Rate: up to 3300 litres per hour Dimensions: 60(H) x 228(W) x 60(D)mm Width : 228.0mm Height : 60.0mm Depth : 60.0mm
TechBrands 12V Inflator Air Pump Car Lighter (Black)
69.9 AUD
Economical but high capacity 12 volt pump suitable for airbeds, inflatable pools, etc. that require large volumes of air at modest pressure. It will also deflate. It is driven from a cigarette lighter socket, so you will need access to a vehicle, or a cig lighter socket to battery clips (Cat. TEP505). If you have no 12V power, consider the MWA622 Supplied with 2 adaptor nozzles Airflow/pressure: 679lpm at 0.54PSI Noise: Dimensions: 245(L) x 130(W) x 165(H)mm Power: 12V @ 100W Length : 245.0mm Width : 130.0mm Height : 165.0mm
TechBrands Pre-connected Cable Mini Lamp (3x7mm) - 12V Yellow
22.9 AUD
SMALL SIZE Globe size A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. 1.5V White: SL2680 3V Red: SL2681 6V Blue: SL2683 9V Green: SL2684 12V Yellow: SL2685 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 12V Length : 7mm Diameter : 4mm Cable length : 100mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 11cm Packaged Width : 0.3cm Packaged Height : 0.3cm Globe Current : 100mA
TechBrands Pre-connected Cable Mini Lamp (4x10mm) - 12V Yellow
22.9 AUD
A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. LARGE SIZE White 1.5v: SL2670 Red 3v: SL2671 Blue 6v: SL2673 Green 9v: SL2674 Yellow 12v: SL2675 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 12V Length : 10mm Diameter : 4mm Cable length : 150mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 15cm Packaged Width : 0.4cm Packaged Height : 0.4cm Globe Current : 100mA
TechBrands 12V Monocrystalline Solar Panel with Clips/Lead - 10W
141.9 AUD
High quality solar panel with high efficiency and smaller footprint compared to our regular monocrystalline models. An easy way to keep your 12V batteries topped up and ready to go on your caravan, farm equipment, the spare car, or on the shed out the back. The dust and weather resistant panel features a robust frame, and is supplied with 3m long leads terminated with battery clips. Fitted with a blocking diode making them suitable for direct connection to your battery as a trickle charger (take note of the minimum battery capacity), or as a low current charger to replace a load or current drain on the battery. A charge controller is recommended to prevent over-charging of the battery when the panel output exceeds the routine circuit load. DC Voltage : 12.0V Maximum Power : 10.0W Width : 385.0mm Height : 253.0mm Depth : 30.0mm Cable length : 3.0m Weight : 1.15kg Solar panel type : Monocrystalline Open Circuit Voltage : 21.8V Short Circuit Current : 610.0mA Voltage at Power Max : 17.4V Current at Power Max : 580.0mA Power Connector : Alligator Clips
TechBrands TMC-0430107 12V Inline Pump 17L Per Minute
111.9 AUD
A simple, cylindrical unit (43mm dia) that can be held down with a saddle clamp or even a couple of cable ties. Will pump up to 1,060 litres/hour on a 7 metre head but continuous use for such large amounts of water should be avoided. Total current draw is only 3 Amp. Required 5 Amp fuse Hose in/out 1/2" (12mm)
TechBrands 12V White Kettle (1L)
76.9 AUD
This attractive kettle features a water level window, an auto-shut off and a boil dry protector. The kettle has a power rating of 150W, which is about the maximum you can pull from a cigarette lighter or 12V power socket. Make sure your cig lighter circuit has a 15A fuse fitted. Length : 165.0mm Height : 185.0mm Depth : 150.0mm Volume Liquid : 1000.0ml Required Voltage : 12.0V Vehicle Connection : Cigarette Lighter Lead Included : true
TechBrands 2250 Lumen Single Row Beam LED Worklight Flood Lamp (12-24V)
139.9 AUD
Just hook it up to your 12V or 24V battery system and light up your work area, campsite, boat deck or any other outdoor area. This single row LED work light features 5x high power Epistar(R) 5W LEDs housed in an IP67 rated powder coated 6063 aluminium heat sink case, covered with an unbreakable Lexan(R) polycarbonate lens. Being LEDs, they use very little power to produce ample light, and are impervious to shock and vibrations - excellent in 4WD, marine, caravan, mining, or any other harsh environment application. Flood beam output. Light Rating Lumens : 2250.0lm IP Rating : 68 IP Rating certificate : true Operating Temperature : 60.0 Degrees C LED Power : 5.0W LED Quantity : 5.0pc Equivalent Traditional Globe : 175.0W Outdoor Light Type : Floodlight Beam Pattern : flood Equivalent Halogen Power : 175.0W Length : 140.0mm Height : 45.0mm Depth : 71.0mm Current Draw : 0.8A, 1.56A
TechBrands Car Battery Type Clips 2pk - 50A
22.9 AUD
All have insulated colour coded handles. 1 Red & 1 Black. DC current rating : 50A Length : 98mm Width : 25mm Packaged Volume : 0.15l Packaged Weight : 0.04kg Packaged Length : 11cm Packaged Width : 9cm Packaged Height : 1.5cm Plug or Socket Type : Alligator Clips Attachment Method : Solder Tag Pack Quantity : 2pc
TechBrands Economy 12V Auto Fresh Water Pump - 2.4 LPM
101.9 AUD
Suitable for camp showers and general pump applications. Easy fit and removal Self-priming Inbuilt pressure switch Handles liquid up to 60 degrees C temp High pressure, low noise, low corrosion Flow: 0.63 gal/min / 2.4 Litres/min. Pressure: 65PSI / 0.45 BAR Current draw: 2.1A Dimensions: 150 x 100 x 64mm
TechBrands Battery Isolator Switch with AFD 275A - 4-position
123.9 AUD
Provides 4-way selection for battery 1 / 2 / both, and off. The switch itself is very durable and rated for massive output. It features removable windows on all four sides to cater for whatever cabling arrangement you have. Alternator Field Disconnect (AFD) protects your alternator when switching batteries in and out of the circuit. By disconnecting the alternator moments before the battery (moments after when re-engaging), there's always a load on the alternator to protect the regulation circuitry. Specifications: Mains Voltage Range : 48V Packaged Volume : 1.44l Packaged Weight : 0.3kg Packaged Length : 16.9cm Packaged Width : 10.3cm Packaged Height : 8.3cm High Current Rated Protects your alternator Versatile cable entry Continuous Current: 200A Surge Current (5min): 300A Cranking Current (10 sec): 1000A
TechBrands 12-Way Screw Terminal Strip - 30A
22.9 AUD
12 way & capable of being divided with a sharp knife. Each terminal block has a sturdy mounting hole on a fixed pitch. Temperature: -35DegC ~ 110DegC AC current rating : 30A AC Voltage rating : 250V, 450V Length : 164.5mm Packaged Volume : 0.1l Packaged Weight : 0.07kg Packaged Length : 16.7cm Packaged Width : 2.6cm Packaged Height : 2.2cm Type : Screw Terminal Device : Joining Terminal Attachment Method : Screw Terminals Cable Entry Diameter : 5.6mm Number of Contacts : 12pc Terminal Spacing : 10mm Body Material : Nylon
Version 3 Brass Monkey Lithium Batteries Charger 12.6V
91.9 AUD
This 12.6 volt Mains Power Supply charges Version 3 Brass Monkey fridge/freezer batteries while removed from the fridge. This is a great option if the trip home is too short to fully charge the battery ready for the next use, or where multiple batteries are used alternately. No need to remove the fridge from the vehicle. Just remove the battery from its cradle for charging , or swap it with a second charged battery. Features a 2.1mm DC jack that plugs directly into the battery. Suitable for 5.2Ah GH 2049 7.8Ah GH2051 and 15.6Ah GH2053.
TechBrands Victron Profesional IP65 Blue Smart Charger (12V) - 10A
426.9 AUD
Thanks to its seven-step charging algorithm, this professional smart charger maintains the health of your 12V lead-acid or Lithium batteries, and helps provide better performance and a longer battery life. A force-fed low current function can also recover some deeply-discharged 'dead' lead-acid batteries, which can save you the expense of buying a replacement. Built-in LEDs and one-button operation sets and shows the charging status and battery condition. Alternatively, the active charge status and operation can be set and checked in real-time via a Bluetooth enabled Smartphone, tablet or laptop. A graphical view and historical usage statistics can be viewed for the past 40 charge cycles, and expert settings can be set for optimum charging. The charger's IP65 splash and dustproof rating makes it ideal for use in workshops, and safety features protect against reverse polarity, short circuits, and over-temperature. Supplied with 1.5m long lead with protected battery clamps or M6 eye terminals for temporary or permanent applications. In addition, the charger can also double as a power supply to power 12V devices in the workshop with or without a battery connected. Mains powered. Charging modes: 1. Test/Charge 2. Bulk 3. Absorption 4. Recondition 5. Float 6. Storage 7. Refresh FEATURES: - Supports Lead-acid and LiFePO4 12V batteries - IP65 rated - Bluetooth connectivity - Android, iOS/Mac compatible App - High efficiency & Silent Operation Four models to choose from: MB3950: 12V 5A. Supports lead-acid batteries from 7Ah to 50Ah or Li-ion batteries from 4Ah to 50Ah. MB3952: 12V 7A. Supports batteries from 7Ah up to 70Ah or Li-ion batteries from 4Ah to 70Ah. MB3954: 12V 10A. Supports batteries from 10Ah up to 100Ah or Li-ion batteries from 6Ah to 100Ah. MB3956: 12V 25A. Supports batteries from 33Ah up to 250Ah or Li-ion batteries from 20Ah to 250Ah. SPECIFICATIONS: Charge Voltage: - Absorption: 14.4-14.7V (14.2V Li-ion) - Float: 13.8V (13.5V Li-ion) - Storage: 13.2V (13.5V Li-ion) Note: This item requires Australian Standard 230V / 50Hz mains power supply to operate. Please check your local power supply to ensure that this item will work in your country. Adapters and transformers may be required and are not included. IP Rating : IP65 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 5 - Water jets Length : 190mm Width : 105mm Height : 60mm Weight : 900g Mains Voltage Range : 220V, 250V Frequency : 50Hz, 50Hz Mains Max Current : 0.6A Packaged Volume : 4.29l Packaged Weight : 1.42kg Packaged Length : 29.9cm Packaged Width : 21.1cm Packaged Height : 6.8cm Type of Batteries : Sealed Lead Acid (SLA)Lithium Ferrous Phosphate (LiFePO4) Charger Output Voltage : 14.4V Charger Output Current : 10A Controller Type : Multi-Stage Connection Type : M6/M8 EyeletAlligator Clips Additional Functions : Short Circuit ProtectionOverload ProtectionSafety Timer ProtectionBluetooth Monitoring Charger Input Voltage :...
TechBrands Victron Profesional IP65 Blue Smart Charger (12V) - 5A
280.9 AUD
Thanks to its seven-step charging algorithm, this professional smart charger maintains the health of your 12V lead-acid or Lithium batteries, and helps provide better performance and a longer battery life. A force-fed low current function can also recover some deeply-discharged 'dead' lead-acid batteries, which can save you the expense of buying a replacement. Built-in LEDs and one-button operation sets and shows the charging status and battery condition. Alternatively, the active charge status and operation can be set and checked in real-time via a Bluetooth enabled Smartphone, tablet or laptop. A graphical view and historical usage statistics can be viewed for the past 40 charge cycles, and expert settings can be set for optimum charging. The charger's IP65 splash and dustproof rating makes it ideal for use in workshops, and safety features protect against reverse polarity, short circuits, and over-temperature. Supplied with 1.5m long lead with protected battery clamps or M6 eye terminals for temporary or permanent applications. In addition, the charger can also double as a power supply to power 12V devices in the workshop with or without a battery connected. Mains powered. Charging modes: 1. Test/Charge 2. Bulk 3. Absorption 4. Recondition 5. Float 6. Storage 7. Refresh FEATURES: - Supports Lead-acid and LiFePO4 12V batteries - IP65 rated - Bluetooth connectivity - Android, iOS/Mac compatible App - High efficiency & Silent Operation Four models to choose from: MB3950: 12V 5A. Supports lead-acid batteries from 7Ah to 50Ah or Li-ion batteries from 4Ah to 50Ah. MB3952: 12V 7A. Supports batteries from 7Ah up to 70Ah or Li-ion batteries from 4Ah to 70Ah. MB3954: 12V 10A. Supports batteries from 10Ah up to 100Ah or Li-ion batteries from 6Ah to 100Ah. MB3956: 12V 25A. Supports batteries from 33Ah up to 250Ah or Li-ion batteries from 20Ah to 250Ah. SPECIFICATIONS: Charge Voltage: - Absorption: 14.4-14.7V (14.2V Li-ion) - Float: 13.8V (13.5V Li-ion) - Storage: 13.2V (13.5V Li-ion) Note: This item requires Australian Standard 230V / 50Hz mains power supply to operate. Please check your local power supply to ensure that this item will work in your country. Adapters and transformers may be required and are not included. IP Rating : IP65 Dust/Particle Ingress Protection : 6 - Dust tight, no ingress of dust Liquid/Moisture Ingress Protection : 5 - Water jets Length : 182mm Width : 81mm Height : 45mm Weight : 900g Mains Voltage Range : 220V, 250V Frequency : 50Hz, 50Hz Mains Max Current : 0.6A Packaged Volume : 1.04l Packaged Weight : 1kg Packaged Length : 28cm Packaged Width : 18cm Packaged Height : 5cm Type of Batteries : Sealed Lead Acid (SLA)Lithium Ferrous Phosphate (LiFePO4) Charger Output Current : 5A Controller Type : Multi-Stage Connection Type : Alligator ClipsM6/M8 Eyelet Additional Functions : Short Circuit ProtectionOverload ProtectionSafety Timer ProtectionBluetooth Monitoring Charger Input Voltage : 12V Battery Capacity Range Up to : 50Ah...
TechBrands USB Charger Wiring Kit (2.1A)
57.9 AUD
A USB power socket with weatherproof cover, suitable for mounting on motorbikes, under-dash on boats or open-top cars. Outputs 5VDC to power or charge Smartphones, Tablets, GPS, etc. Mount to almost any surface using screws, cable ties, double-sided tape, etc (Mounting hardware not included). Supplied with 1.2m fused lead with SAE connectors for easy disconnects. DC current rating : 2.1A Cable length : 1.2m Packaged Volume : 1.6l Packaged Weight : 0.12kg Packaged Length : 13.2cm Packaged Width : 19.6cm Packaged Height : 6.2cm
TechBrands 4 Channel Battery Charger w/ LED indicator (Ni-MH Ni-A)
41.9 AUD
Ultra portable, take it anywhere! Individually monitored channels with LEDs for quick-glance charging status. USB powered for universal operation. Suitable for AA and AAA Ni-MH batteries. Steady charge rate to keep your batteries in top shape. Features: 4 channels with individual monitoring Universal USB power Compact and lightweight Charge Time: AA: 8-11 Hours (1000-1500mAh), 12-16 Hours (1600-2100mAh) AAA: 10-16 Hours (500-800mAh) Width : 68.0mm Height : 98.0mm Depth : 25.0mm Weight : 55.0kg USB recharge time : 8.0hr USB Voltage Input : 5.0V USB Input Current : 1.0A Type of Batteries : Nickel Metal Hydride (Ni-MH) Cell Type(s) Charged : AA, AAA Number of Cells : 4.0pc Charger Output Current : 160.0mA
TechBrands 12V Battery Monitor Indicator with Smartphone App Bluetooth
137.9 AUD
A powerful intelligent battery monitor for smartphones. It's easy to install, simply connect to the battery terminals - that's it! Then install the free to download app on your favourite smartphone, for full real-time display, datalogging, as well as push notifications for low battery voltage warnings and more! Short circuit and reverse polarity protected for safety. Easy to use and convenient. Features: Real-time battery monitoring Stores and displays historical data Tests: battery, cranking, charging, trip duration Automatic sync, alerts sent to mobile (free APP on iOS, Android) Short circuit and reverse polarity protection DC current rating : 1.0mA Operating Temperature : -40.000000 Degrees C, 90.0 Degrees C DC Volts Measurement Range : 6.0V, 20.0V Width : 56.0mm Height : 36.0mm Depth : 16.0mm Cable length : 150.0mm Weight : 35.0g Accuracy plus : 0.03 Accuracy minus : 0.03
TechBrands Trailer Vision Panel Mount Battery Connector (50A)
60.9 AUD
Flush mount 50A battery type quick fit connector cover. Suits charging systems for caravans, trailers, solar, marine, industrial. Note: 50A Battery connector and cable not included, for illustration purpose only. Length : 70mm Width : 65mm Height : 40mm Weight : 120g Required Voltage : 12V, 12V Current Draw : 1A, 50A Packaged Volume : 1.27l Packaged Weight : 0.15kg Packaged Length : 18.5cm Packaged Width : 13.7cm Packaged Height : 5cm
TechBrands Easy-Install Dual USB Charging Ports Socket (2x2.1A)
69.9 AUD
Supplied with panel and surface mount hardware, to easily mount inside your car, caravan, truck etc. You can power it from 12-24V, suitable for cars and dual-battery trucks alike. Includes removable dust cover. Features: Versatile mounting options Dual 2.1A USB ports Removable dust cover Input: 12-24VDC Output: 2 x 5VDC @ 2.1A (Total 4.2A) Weight: 31g Dimensions: 50(D) x 35(Dia.)mm Depth : 50.0mm Diameter : 35.0mm Output Type : USB Type A Output Connection : Socket Number of Outputs : 2.0pc Connection Type : Spade Terminals Type of converter or transformer : DC to DC
TechBrands Pre-connected Cable Mini Lamp (3x7mm) - 1.5V White
22.9 AUD
SMALL SIZE Globe size A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. 1.5V White: SL2680 3V Red: SL2681 6V Blue: SL2683 9V Green: SL2684 12V Yellow: SL2685 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 1.5V Length : 7mm Diameter : 3mm Cable length : 100mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 11cm Packaged Width : 0.3cm Packaged Height : 0.3cm Globe Current : 100mA
TechBrands Pre-connected Cable Mini Lamp (4x10mm) - 1.5V White
22.9 AUD
A large range of various sizes and voltages of mini lamps. Supplied with wiring cable pre-connected. LARGE SIZE White 1.5v: SL2670 Red 3v: SL2671 Blue 6v: SL2673 Green 9v: SL2674 Yellow 12v: SL2675 *The lights are in white, coloured wires are to indicate different voltages. DC Voltage : 1.5V Length : 10mm Depth : 4mm Cable length : 150m Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 0.3cm Packaged Width : 0.3cm Packaged Height : 1.6cm Globe Current : 100mA
TechBrands Makerhub Duinoboy Build-A-Game Learning Kit
101.9 AUD
An Arduino-based 8-bit handheld game console that you can code or upload your favourite Arduboy games. It is based on the ATMEGA32U4 chip, driven by an Arduino Leonardo, and features a 1.3= OLED screen, and volume control. It can be powered by connecting a USB cable or from 2 x AAA batteries (not included). Width : 65.0mm Height : 100.0mm Depth : 28.0mm Weight : 71.0g Size / Shape : AAA Type : Alkaline Battery quantity : 2.0pc Batteries included : false Batteries can be replaced by user : true