Response Response Woofer Speaker Driver (8 ohm) - 10""
153.9 AUD
Consult the complete sheet with detailed information, compare prices and identify the features of Response Response Woofer Speaker Driver (8 ohm) - 10"", available at the cost of 153.9 AUD; it classifies in the Speakers & Subwoofers category; the seller is Response Response Woofer Speaker Driver (8 ohm) - 10"", and the manufacturer is Response.
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
EAN: 9319236942796
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
EAN: 9319236942796
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
Response Response Woofer or Midrange Speaker Driver (8 ohm) - 6.5""
77.9 AUD
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
Response Response Woofer or Midrange Speaker Driver (8 ohm) - 5""
67.9 AUD
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
Response Response Woofer Speaker Driver (8 ohm) - 12""
189.9 AUD
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
Response Response Woofer Speaker Driver (8 ohm) - 8""
89.9 AUD
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
Response Response Woofer or Midrange Speaker Driver (8 ohm) - 4""
57.9 AUD
These Response woofers are excellent for replacement or for new speaker design constructions. Not only are they price competitive and perform very well, but they also look fantastic! The concave treated paper cone matched with rubber surround provides smooth overall response. Equipped strong steel frame baskets, high power magnet and voice coils, these drivers will produce massive quantities of clean bass output for any musical application.
LatestBuy Horn Speaker 8 ohm 10W (5"")
61.9 AUD
Fully weatherproof. Unique voice coil construction ensures high dependability on full drive. Suitable for PA, intercom, security systems, etc.
TechBrands Response 2-Way Coax Car Speaker - 6.5""
125.9 AUD
These 6.5"" coax speakers are an ideal replacement for the standard equipment stereo speakers you get in the average car. All are equipped with titanium coated fibre woofers and silk dome tweeters for smooth high frequency response. Sold as a pair
TechBrands Response 2-Way Coax Car Speaker - 6x9""
153.9 AUD
These 6 x 9"" coax speakers are an ideal replacement for the standard equipment stereo speakers you get in the average car. All are equipped with titanium coated fibre woofers and silk dome tweeters for smooth high frequency response. Sold as a pair
LatestBuy 6pc Precision Torx ScrewDriver Set (T7 T8 T9 T10 T15 T20)
41.9 AUD
A quality set of chrome vanadium drivers all presented in a felt-lined plastic case.
Digitech Audio 2-Way Ceiling Speaker (Swivel Tweeter) - 8""
241.9 AUD
These ceiling speakers are a 2 way speaker design giving excellent audio quality compared to traditional PA speakers. Combining a coaxial woofer with dome tweeter they are available in three sizes to cover a variety of domestic and commercial applications. Two of the models also have adjustable tweeter mounts making them ideal when used in a home theatre setup by allowing you to direct high frequencies towards the centre of a room. The flush mount design and fold out retaining clamps allow them to be easily installed in new or existing ceilings, and the matte white finish blends in with most ceiling colours.
LatestBuy Power Driver 32 Bit Set with Red Holder
52.9 AUD
All the weirdo driver bits in one go!! The set consists of 32, yes 32 of the driver bits that you don't normally see. You don't get any slotted, Phillips or Posidrive bits. You do get: 4 x Tri-wing, size 1, 2, 3, and 4 9 x Torx (tamperproof), size T8, T10, T15, T20, T25, T27, T30 and T35 4 x Pin drive (snake), size 4, 6, 8 and 10 6 x In - Hex (allen), *metric, size 2, 2.5, 3, 4, 5 & 6 6 x In - Hex (allen), *imperial size 5/64, 3/32, 7/64, 1/8, 9/64 and 5/32 3 x Torque Set, size 6, 8 and 10. With this you get a hex driver with magnetic retainer, all in a rubber holder (67 x 45 x 30mm). Tamperproof Torx works as normal Torx as well. Tamperproof In - Hex drive type.
TechBrands Line Speaker Transformer 5W
27.9 AUD
100V Line speaker systems are used in large area speaker systems such as supermarkets to ensure minimal loss over the long speaker cables. These transformers are used to tap the 100V (or 70V 1/2 power) public address amplifier lines to use an 8 ohm speaker. Made with grain oriented steel for good frequency response. Good dynamic range. Primary taps enable you to select power level for 8 ohm speaker. Connect primary to C (100V) and tap for whatever sound level is required from 0.5-5W rms. Supplied with terminal block mounted on top of transformer.
Radio Parts All Purpose Replacement Speaker 27mm
19.9 AUD
Mylar diaphragm speaker for replacement use in Telephones, Headphones Intercoms and also suitable where moisture is present. - Mini Size : 27mm Diameter- 9mm Thick - 8 0.25Watt - Frequency Response: 30 ~ 18 KHz Weight: 0.008
LatestBuy Compact Megaphone PA with Siren - 10W RMS
89.9 AUD
If you need to be heard in a crowd, this is a great way to do it. Totally portable using 8 x C batteries (not included) for approximately 8-hours of operation. The powerful 25W amplifier and horn speaker will help your message be heard up to 500m away! The microphone can detach from the back of the unit thanks to a curly cable, allowing you to hold the unit above your head (in a crowd), but still speak clearly into the microphone. A built-in siren generator is also included, which is sure to get you attention. The shoulder strap makes it easy to carry and trigger activation provides straight forward operation and power-saving while not in use. Features: - Detachable Microphone - Siren Generator - Shoulder Strap - Max Output Power: 25W - Microphone: Uni-Directional Dynamic
soundcore Motion Boom Plus｜Outdoor Speake Black
169.99 AUD
Incredible Sound Loved by 20 Million+ People Epic Outdoor Sound: 80W booming sound is delivered by two 30W woofers and 10W tweeters, while real-time intensified bass can be heard with Soundcore's proprietary BassUp technology. To improve treble performance of Motion Boom Plus outdoor speaker, titanium drivers ensure an all-around epic sound. Lightweight and Ultra-Portable: Take your tunes everywhere you go with Motion Boom Plus Bluetooth speaker's built-in handle and detachable strap. 20-Hour Playtime: Motion Boom Plus outdoor speaker is equipped with a 13,400mAh battery capacity with 20 hours of playtime to save you the trouble of frequent charging and make listening more enjoyable. Water and Dust Resistant: With an IP67 certification, you'll never have to worry about water splashes, rain, accidental spills, or dust while you're out and about with your Motion Boom Plus outdoor speaker. Note : For peak performance, please use the soundcore app and update to the latest firmware.
TechBrands All Purpose Replacement Speaker - 40mm
19.9 AUD
A mini speaker with mylar cone to replace existing 40mm speakers. Type: Mylar Cone Output Power: 0.25WRMS Impedance: 8Ω Dimensions: 40(Dia) x 10(H)mm
Jaycar 1/4 Watt Carbon Film Resistors 300pcs
25.9 AUD
This pack includes five of virtually each value from 1 Ohm to 10 Meg. Sixty different values. All resistors are bandoleered for easy sorting. Values supplied are 1, 1.5, 2.2, 3.3, 4.7, 5.6, 10, 12, 15, 22, 27, 33, 39, 47, 56, 68, 82, 100, 120, 180, 220, 270, 330, 470, 560, 680, 820, 1k, 1k2, 1k5, 1k8, 2k2, 3k3, 3k9, 4k7, 5k6, 8k2, 10k, 12k, 15k, 18k, 22k, 27k, 33k, 39k, 47k, 56k, 68k, 82k, 100k, 120k, 150k, 220k, 270k, 330k, 470k, 1M, 2M7, 4M7 & 10M.
LatestBuy 1W Mini Audio Amplifier Module Kit (B182)
29.9 AUD
Assembly Required This tiny PCB measuring only 56(L) x 16W(mm) incorporates all the electronics for a 1 Watt amplifier. 6 to 9VDC operating voltage, 50mV input sensitivity, 8 ohm output and 20 to 25000Hz output frequency. Optional connection for a 10k ohm - 100K ohm logarithmic potentiometer (not included) for adjustable volume control. Build this kit in minutes! Kit supplied with PCB and all electronic components. Suitable power supply required extra (use MP-3146).
LatestBuy MIDI to USB Cable Interface
63.9 AUD
Connect any MIDI device to your computer: keyboards, controllers, instruments, sound cards, samplers, drum machines etc. Plug and play, no software or drivers required. MIDI in and MIDI out connectors with LED indication. Cable is 2 metres long. Compatibility: Windows 8.1, 8, 7, Vista, XP, 2000, Mac OS(R) X 10.0+, Linux