Renogy Dealer - Temperature Sensor for Solar Charge Controllers
12.44 AUD
Access the complete information sheet, compare prices and identify the features of Renogy Dealer - Temperature Sensor for Solar Charge Controllers, available at the price of 12.44 AUD; it fits into the Solar Power category; the product is sold by Renogy Dealer - Temperature Sensor for Solar Charge Controllers and is made by Renogy.
Description Perfect for solar systems that experience varying temperature changes throughout the year, Renogy's temperature sensor optimizes battery performance and extends its lifespan! Compatible with most of Renogy's flagship MPPT and PWM charge controllers, the temperature sensor uses the ambient temperature around the battery to accurately provide temperature compensation. This ensures that your battery is receiving an accurate and proper charge. Enhance your solar system with a temperature system today! Please note that the RTSCC-G1 is NOT to compatible with lithium batteries. If you have any questions regarding this product, please submit a case ! Key Features Compatible with Renogy Adventurer 30-Li , Adventurer 30A with communication port, Rover Li series, and Wanderer 30-Li charge controller models. Non-polarized wires are insulated and protected from harsh environments. Wide Temperature Compensation Range up to 176 F. ROHS compliance and rated for outdoor use. Package Includes Renogy Battery Temperature Sensor for Solar Charge Controllers 1 x Renogy Solar Panel MC4Y Multi Branch Connectors (Pair) Temperature Range: -20℃ ~ +80℃ Connector: RJ11 Probe: 6*50mm copper Cable Length: 3 meters / 118 inches Cable: 4-conductor copper cable with PVC jacket, 26 AWG Warranty Information Accessories 1-year material warranty Certification
Shipping Cost: 0 AUD
Availability: in stock
Condition: new
Description Perfect for solar systems that experience varying temperature changes throughout the year, Renogy's temperature sensor optimizes battery performance and extends its lifespan! Compatible with most of Renogy's flagship MPPT and PWM charge controllers, the temperature sensor uses the ambient temperature around the battery to accurately provide temperature compensation. This ensures that your battery is receiving an accurate and proper charge. Enhance your solar system with a temperature system today! Please note that the RTSCC-G1 is NOT to compatible with lithium batteries. If you have any questions regarding this product, please submit a case ! Key Features Compatible with Renogy Adventurer 30-Li , Adventurer 30A with communication port, Rover Li series, and Wanderer 30-Li charge controller models. Non-polarized wires are insulated and protected from harsh environments. Wide Temperature Compensation Range up to 176 F. ROHS compliance and rated for outdoor use. Package Includes Renogy Battery Temperature Sensor for Solar Charge Controllers 1 x Renogy Solar Panel MC4Y Multi Branch Connectors (Pair) Temperature Range: -20℃ ~ +80℃ Connector: RJ11 Probe: 6*50mm copper Cable Length: 3 meters / 118 inches Cable: 4-conductor copper cable with PVC jacket, 26 AWG Warranty Information Accessories 1-year material warranty Certification
Shipping Cost: 0 AUD
Availability: in stock
Condition: new
Compare Similar Products
Renogy Dealer - Temperature Sensor for Voyager Charge Controllers
13.32 AUD
Description Perfect for solar systems that experience varying temperature changes throughout the year, The new edition Voyager RTS optimizes battery performance and extends its lifespan! Compatible only with Voyager charge controllers, the temperature sensor uses the ambient temperature around the battery to accurately provide temperature compensation. This ensures that your battery is receiving an accurate and proper charge. Enhance your solar system with a temperature system today! Please note that the RTSVOY-AU is NOT compatible with lithium batteries. If you have any questions regarding this product, please submit a case ! Key Features Compatible with 10A/20A Voyager Models; Non-polarized wires are insulated and protected from harsh environments; Wide Temperature Compensation Range up to 176°F; ROHS compliance and rated for outdoor use. Package Includes Battery Temperature Sensor 1 x Battery Temperature Sensor for Voyager Charge Controllers Temperature Range: -4°F ~ 176 °F / -20°C ~ +80°C Cable: 22AWG, 2-Pin Conductor Probe: 0 .24*2.36in / 6*60mm stainless steel Cable Length: 9.8 ft Max Voltage Rating: 300V Maximum Power: 50mW Warranty Information Panels 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year material warranty Certification
Renogy Temperature Sensor for Solar Charge Controllers
19.99 AUD
Description Perfect for solar systems that experience varying temperature changes throughout the year, Renogy's temperature sensor optimizes battery performance and extends its lifespan! Compatible with most of Renogy's flagship MPPT and PWM charge controllers, the temperature sensor uses the ambient temperature around the battery to accurately provide temperature compensation. This ensures that your battery is receiving an accurate and proper charge. Enhance your solar system with a temperature system today! Please note that the RTSCC-G1 is NOT to compatible with lithium batteries. If you have any questions regarding this product, please submit a case ! Key Features Compatible with Renogy Adventurer 30-Li , Adventurer 30A with communication port, Rover Li series, and Wanderer 30-Li charge controller models. Non-polarized wires are insulated and protected from harsh environments. Wide Temperature Compensation Range up to 176 F. ROHS compliance and rated for outdoor use. Package Includes Renogy Battery Temperature Sensor for Solar Charge Controllers 1 x Temperature Sensor for Solar Charge Controllers Temperature Range: -20℃ ~ +80℃ Connector: RJ11 Probe: 6*50mm copper Cable Length: 3 meters / 118 inches Cable: 4-conductor copper cable with PVC jacket, 26 AWG Warranty Information Accessories 1-year material warranty Certification
Renogy Temperature Sensor for Voyager Charge Controllers
25.99 AUD
Description Perfect for solar systems that experience varying temperature changes throughout the year, The new edition Voyager RTS optimizes battery performance and extends its lifespan! Compatible only with Voyager charge controllers, the temperature sensor uses the ambient temperature around the battery to accurately provide temperature compensation. This ensures that your battery is receiving an accurate and proper charge. Enhance your solar system with a temperature system today! Please note that the RTSVOY-AU is NOT compatible with lithium batteries. If you have any questions regarding this product, please submit a case ! Key Features Compatible with 10A/20A Voyager Models; Non-polarized wires are insulated and protected from harsh environments; Wide Temperature Compensation Range up to 176°F; ROHS compliance and rated for outdoor use. Package Includes Battery Temperature Sensor 1 x Battery Temperature Sensor for Voyager Charge Controllers Temperature Range: -4°F ~ 176 °F / -20°C ~ +80°C Cable: 22AWG, 2-Pin Conductor Probe: 0 .24*2.36in / 6*60mm stainless steel Cable Length: 9.8 ft Max Voltage Rating: 300V Maximum Power: 50mW Warranty Information Panels 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year material warranty Certification
Dealer---Renogy Solar Tray Cables Connecting Charge Controller To Battery (598)
79.29 AUD
Description Renogy’s Tray cable is a set of two wires made for connecting your charge controller to your battery. Specialized with battery rings on one end for effortless connection to your battery and exposed wire on the other end to lead directly into your charge controller; this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as three gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. With the Renogy Tray Cable you can have extra length between your charge controller and battery with ease! If you have any questions regarding this product, please submit a case! Key Features TUV tested cable Produce optimal power output even in high temperature conditions. UV resistant TUV logo print per feet indicates that the cable meets TUV standards for PV solar application. Package Includes Renogy Solar Tray Cables 1 x Renogy 8ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 8WG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 4AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 4 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 8AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Tray Cables Connecting Charge Controller To Battery (426)
79.29 AUD
Description Renogy’s Tray cable is a set of two wires made for connecting your charge controller to your battery. Specialized with battery rings on one end for effortless connection to your battery and exposed wire on the other end to lead directly into your charge controller; this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as three gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. With the Renogy Tray Cable you can have extra length between your charge controller and battery with ease! If you have any questions regarding this product, please submit a case! Key Features TUV tested cable Produce optimal power output even in high temperature conditions. UV resistant TUV logo print per feet indicates that the cable meets TUV standards for PV solar application. Package Includes Renogy Solar Tray Cables 1 x Renogy 8ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 8WG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 4AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 4 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 8AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Tray Cables Connecting Charge Controller To Battery
79.29 AUD
Description Renogy’s Tray cable is a set of two wires made for connecting your charge controller to your battery. Specialized with battery rings on one end for effortless connection to your battery and exposed wire on the other end to lead directly into your charge controller; this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as three gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. With the Renogy Tray Cable you can have extra length between your charge controller and battery with ease! If you have any questions regarding this product, please submit a case! Key Features TUV tested cable Produce optimal power output even in high temperature conditions. UV resistant TUV logo print per feet indicates that the cable meets TUV standards for PV solar application. Package Includes Renogy Solar Tray Cables 1 x Renogy 8ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 8WG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 4AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 4 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 8AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Tray Cables Connecting Charge Controller To Battery (427)
79.29 AUD
Description Renogy’s Tray cable is a set of two wires made for connecting your charge controller to your battery. Specialized with battery rings on one end for effortless connection to your battery and exposed wire on the other end to lead directly into your charge controller; this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as three gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. With the Renogy Tray Cable you can have extra length between your charge controller and battery with ease! If you have any questions regarding this product, please submit a case! Key Features TUV tested cable Produce optimal power output even in high temperature conditions. UV resistant TUV logo print per feet indicates that the cable meets TUV standards for PV solar application. Package Includes Renogy Solar Tray Cables 1 x Renogy 8ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 8WG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 8ft 4AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 8ft AWG: 4 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 12AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 12 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 10AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 10 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Renogy 16ft 8AWG Wire Copper Solar Tray Cables For Connecting Charge Controller to Battery (A pair) Length: 16ft AWG: 8 Temperature: -40°F to +185°F Rating Voltage: 600/1000V Warranty Information Accessories 1-year material warranty
Renogy Dealer - REGO 12V 60A MPPT Solar Charge Controller (726)
386.64 AUD
Description The REGO 12V 60A MPPT Solar Charge Controller focuses on the simplified installation and comprehensive protections for the whole solar system. Plug-and-play hookups for rapid connection, save on installation time than traditional controllers. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. With the most efficient MPPT technology with high tracking efficiency of up to 99%, maximum the power generated by solar panels to provide more power for your system. The compact and robust nature of the controller not only has a sense of technology and fashion but also saves on installation space relative to the competition. Add the REGO 12V 60A MPPT Solar Charge Controller, one of the most efficient and reliable controllers on the market yet to your system. If you have any questions regarding this product, please submit a case! Key Features 【Comprehensive Protections for Whole System】The REGO charge controller with multiple protections on both solar input and battery output terminals. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. 【Easy Installation and Operation】REGO charge controller use Anderson terminals with a specially designed Anderson to MC4 adaptor cable for a simple and easy way to connect the controller to your solar panels, cutting installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【Ultra-High Tracking Efficiency】Innovative MPPT technology of the REGO provides high tracking efficiency of up to 99% and peak conversion efficiency of 98%, which is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Adopts a four-stage charging（Bulk,Boost,Float,EQU), ensuring high charging efficiency and optimizing the battery status for a longer lifespan. 【Compatible with Multiple Batteries Types】The REGO charge controller is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, able to be perfectly and easily added to your solar system, providing a powerful solution for different occasions. 【Puts Monitoring and Control in Your Hands】Built-in Bluetooth allows you to monitor the REGO charge controller on your smartphone with the Renogy DC Home App. With the app, you can customize multiple battery data such as the boost voltage, float voltage, and duration data. Package Includes REGO 12V 60A MPPT Solar Charge Controller 1 x REGO 12V 60A MPPT Solar Charge Controller Model:RCC60REGO Rated System Voltage:12V Rated Charge Current:60A Rated Max Charge Power:800W Battery Operating Range:10 -16V Battery Types：SLD/AGM;FLD;GEL;USER;LI Max Input Current (short-circuit, Isc):50A Power Limiting Protection:Up to 800W/12V Solar Input...
Renogy Dealer - REGO 12V 60A MPPT Solar Charge Controller
386.64 AUD
Description The REGO 12V 60A MPPT Solar Charge Controller focuses on the simplified installation and comprehensive protections for the whole solar system. Plug-and-play hookups for rapid connection, save on installation time than traditional controllers. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. With the most efficient MPPT technology with high tracking efficiency of up to 99%, maximum the power generated by solar panels to provide more power for your system. The compact and robust nature of the controller not only has a sense of technology and fashion but also saves on installation space relative to the competition. Add the REGO 12V 60A MPPT Solar Charge Controller, one of the most efficient and reliable controllers on the market yet to your system. If you have any questions regarding this product, please submit a case! Key Features 【Comprehensive Protections for Whole System】The REGO charge controller with multiple protections on both solar input and battery output terminals. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. 【Easy Installation and Operation】REGO charge controller use Anderson terminals with a specially designed Anderson to MC4 adaptor cable for a simple and easy way to connect the controller to your solar panels, cutting installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【Ultra-High Tracking Efficiency】Innovative MPPT technology of the REGO provides high tracking efficiency of up to 99% and peak conversion efficiency of 98%, which is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Adopts a four-stage charging（Bulk,Boost,Float,EQU), ensuring high charging efficiency and optimizing the battery status for a longer lifespan. 【Compatible with Multiple Batteries Types】The REGO charge controller is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, able to be perfectly and easily added to your solar system, providing a powerful solution for different occasions. 【Puts Monitoring and Control in Your Hands】Built-in Bluetooth allows you to monitor the REGO charge controller on your smartphone with the Renogy DC Home App. With the app, you can customize multiple battery data such as the boost voltage, float voltage, and duration data. Package Includes REGO 12V 60A MPPT Solar Charge Controller 1 x REGO 12V 60A MPPT Solar Charge Controller Model:RCC60REGO Rated System Voltage:12V Rated Charge Current:60A Rated Max Charge Power:800W Battery Operating Range:10 -16V Battery Types：SLD/AGM;FLD;GEL;USER;LI Max Input Current (short-circuit, Isc):50A Power Limiting Protection:Up to 800W/12V Solar Input...
Renogy Dealer - REGO 12V 60A MPPT Solar Charge Controller (727)
386.64 AUD
Description The REGO 12V 60A MPPT Solar Charge Controller focuses on the simplified installation and comprehensive protections for the whole solar system. Plug-and-play hookups for rapid connection, save on installation time than traditional controllers. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. With the most efficient MPPT technology with high tracking efficiency of up to 99%, maximum the power generated by solar panels to provide more power for your system. The compact and robust nature of the controller not only has a sense of technology and fashion but also saves on installation space relative to the competition. Add the REGO 12V 60A MPPT Solar Charge Controller, one of the most efficient and reliable controllers on the market yet to your system. If you have any questions regarding this product, please submit a case! Key Features 【Comprehensive Protections for Whole System】The REGO charge controller with multiple protections on both solar input and battery output terminals. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. 【Easy Installation and Operation】REGO charge controller use Anderson terminals with a specially designed Anderson to MC4 adaptor cable for a simple and easy way to connect the controller to your solar panels, cutting installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【Ultra-High Tracking Efficiency】Innovative MPPT technology of the REGO provides high tracking efficiency of up to 99% and peak conversion efficiency of 98%, which is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Adopts a four-stage charging（Bulk,Boost,Float,EQU), ensuring high charging efficiency and optimizing the battery status for a longer lifespan. 【Compatible with Multiple Batteries Types】The REGO charge controller is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, able to be perfectly and easily added to your solar system, providing a powerful solution for different occasions. 【Puts Monitoring and Control in Your Hands】Built-in Bluetooth allows you to monitor the REGO charge controller on your smartphone with the Renogy DC Home App. With the app, you can customize multiple battery data such as the boost voltage, float voltage, and duration data. Package Includes REGO 12V 60A MPPT Solar Charge Controller 1 x REGO 12V 60A MPPT Solar Charge Controller Model:RCC60REGO Rated System Voltage:12V Rated Charge Current:60A Rated Max Charge Power:800W Battery Operating Range:10 -16V Battery Types：SLD/AGM;FLD;GEL;USER;LI Max Input Current (short-circuit, Isc):50A Power Limiting Protection:Up to 800W/12V Solar Input...
Renogy Dealer - REGO 12V 60A MPPT Solar Charge Controller (725)
386.64 AUD
Description The REGO 12V 60A MPPT Solar Charge Controller focuses on the simplified installation and comprehensive protections for the whole solar system. Plug-and-play hookups for rapid connection, save on installation time than traditional controllers. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. With the most efficient MPPT technology with high tracking efficiency of up to 99%, maximum the power generated by solar panels to provide more power for your system. The compact and robust nature of the controller not only has a sense of technology and fashion but also saves on installation space relative to the competition. Add the REGO 12V 60A MPPT Solar Charge Controller, one of the most efficient and reliable controllers on the market yet to your system. If you have any questions regarding this product, please submit a case! Key Features 【Comprehensive Protections for Whole System】The REGO charge controller with multiple protections on both solar input and battery output terminals. The integrated high BPU (Battery Protect Unit) technology achieves the highest protection against battery cell damage and battery failure, safeguarding the entire system. 【Easy Installation and Operation】REGO charge controller use Anderson terminals with a specially designed Anderson to MC4 adaptor cable for a simple and easy way to connect the controller to your solar panels, cutting installation time by 60%! REGO’s simple design eliminates tedious data settings and lets you switch between batteries by just turning a knob. 【Ultra-High Tracking Efficiency】Innovative MPPT technology of the REGO provides high tracking efficiency of up to 99% and peak conversion efficiency of 98%, which is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day. Adopts a four-stage charging（Bulk,Boost,Float,EQU), ensuring high charging efficiency and optimizing the battery status for a longer lifespan. 【Compatible with Multiple Batteries Types】The REGO charge controller is compatible with multiple types of batteries: AGM, SLD, Flooded, Gel, and Lithium, able to be perfectly and easily added to your solar system, providing a powerful solution for different occasions. 【Puts Monitoring and Control in Your Hands】Built-in Bluetooth allows you to monitor the REGO charge controller on your smartphone with the Renogy DC Home App. With the app, you can customize multiple battery data such as the boost voltage, float voltage, and duration data. Package Includes REGO 12V 60A MPPT Solar Charge Controller 1 x REGO 12V 60A MPPT Solar Charge Controller Model:RCC60REGO Rated System Voltage:12V Rated Charge Current:60A Rated Max Charge Power:800W Battery Operating Range:10 -16V Battery Types：SLD/AGM;FLD;GEL;USER;LI Max Input Current (short-circuit, Isc):50A Power Limiting Protection:Up to 800W/12V Solar Input...
Renogy Dealer---Voyager 10A PWM Waterproof Solar Charge Controller (467)
48.99 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager 10 amp charge controller is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. It's the perfect solar panel accessory. If you have any questions regarding this product, please submit a case! Key Features 12V / 24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 10A PWM Waterproof Solar Charge Controller 1 x Renogy 10A PWM Waterproof Solar Charge Controller Nominal Voltage: 12V/24V Rated Charge Current: 10A Max. PV Input Voltage: 55 VDC Max. PV Power: 130W (12V) / 260W (24V) Self-consumption: 0.22W (12V) / 0.72W (24V) Temperature Compensation: -3mV/°C/2V, excludes LI Operating Temperature: -31°F to 113°F Storage Temperature: -31°F to 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25kg Grounding: Common Positive Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Voyager 10A PWM Waterproof Solar Charge Controller (466)
48.99 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager 10 amp charge controller is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. It's the perfect solar panel accessory. If you have any questions regarding this product, please submit a case! Key Features 12V / 24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 10A PWM Waterproof Solar Charge Controller 1 x Renogy 10A PWM Waterproof Solar Charge Controller Nominal Voltage: 12V/24V Rated Charge Current: 10A Max. PV Input Voltage: 55 VDC Max. PV Power: 130W (12V) / 260W (24V) Self-consumption: 0.22W (12V) / 0.72W (24V) Temperature Compensation: -3mV/°C/2V, excludes LI Operating Temperature: -31°F to 113°F Storage Temperature: -31°F to 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25kg Grounding: Common Positive Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Voyager 10A PWM Waterproof Solar Charge Controller
48.99 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager 10 amp charge controller is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. It's the perfect solar panel accessory. If you have any questions regarding this product, please submit a case! Key Features 12V / 24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 10A PWM Waterproof Solar Charge Controller 1 x Renogy 10A PWM Waterproof Solar Charge Controller Nominal Voltage: 12V/24V Rated Charge Current: 10A Max. PV Input Voltage: 55 VDC Max. PV Power: 130W (12V) / 260W (24V) Self-consumption: 0.22W (12V) / 0.72W (24V) Temperature Compensation: -3mV/°C/2V, excludes LI Operating Temperature: -31°F to 113°F Storage Temperature: -31°F to 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25kg Grounding: Common Positive Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Rover Li 20 Amp MPPT Solar Charge Controller (371)
104.99 AUD
Description The 20A Rover MPPT Charge Controller features a die-cast aluminum shell that is perfect for heat dissipation while also protecting against general wear and tear. This intelligent controller is not only capable of up to 99% tracking efficiency, but can also self-diagnose system faults. This charge controller displays error codes that can be easily looked up. Capable of automatically detecting 12V/24V systems, this crucial system component can also handle various battery options such as GEL and Lithium. Pair this charge controller with the Renogy BT-1 and the Renogy DC Home smart phone App to view system performance in real time and make parameter changes without having to get up! If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98% Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes Features diverse load control; also capable of charging over-discharged lithium batteries Die-cast aluminum design allows for efficient heat dissipation RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 20 Amp MPPT Solar Charge Controller Nominal system voltage: 12V/24V Auto Recognition Rated Battery Current: 20A Rated Load Current: 20A Max. PV Input Short Current: 25A Max. Battery Voltage: 32V Max Solar Input Voltage: 100 VDC Mounting Oval: 0.30 x 0.18in Net Weight: 3.08 lb. Discharge circuit voltage drop: ≤ 0.15V Overall Dimension: 8.27 x 5.94 x 2.34 in Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) PInstallation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 20 Amp MPPT Solar Charge Controller
104.99 AUD
Description The 20A Rover MPPT Charge Controller features a die-cast aluminum shell that is perfect for heat dissipation while also protecting against general wear and tear. This intelligent controller is not only capable of up to 99% tracking efficiency, but can also self-diagnose system faults. This charge controller displays error codes that can be easily looked up. Capable of automatically detecting 12V/24V systems, this crucial system component can also handle various battery options such as GEL and Lithium. Pair this charge controller with the Renogy BT-1 and the Renogy DC Home smart phone App to view system performance in real time and make parameter changes without having to get up! If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98% Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes Features diverse load control; also capable of charging over-discharged lithium batteries Die-cast aluminum design allows for efficient heat dissipation RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 20 Amp MPPT Solar Charge Controller Nominal system voltage: 12V/24V Auto Recognition Rated Battery Current: 20A Rated Load Current: 20A Max. PV Input Short Current: 25A Max. Battery Voltage: 32V Max Solar Input Voltage: 100 VDC Mounting Oval: 0.30 x 0.18in Net Weight: 3.08 lb. Discharge circuit voltage drop: ≤ 0.15V Overall Dimension: 8.27 x 5.94 x 2.34 in Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) PInstallation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Wanderer Li 30A PWM Solar Charge Controller
52.51 AUD
Description The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use, the controller uses multiple LED indicators to notify users of charge status and battery information. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, the Renogy DC Home smart phone App, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks, including most 12V lithium models available on the market. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Optimized for a 12V system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Smart 4 Stage PWM charging (Bulk, Boost, Float, and Equalization) and temperature compensation increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current. Multiple LED indicators for easy to read charge status and battery information. Integrated RS232 port allows communication with BT-1 Bluetooth module and usage of the Renogy DC Home smart phone App. DOWNLOAD LINKS Package Includes Renogy Wanderer Li 30A PWM Charge Controller 1 x Options: BT-1 Bluetooth Module 1 x The Renogy Wanderer Li 30A Negative PWM Charge Controller Nominal Voltage: 12 VDC Max. PV Input Power: 400W Rated Charge Current: 30A Max. PV Input Voltage: 25 VDC Self-Consumption: High Voltage Disconnect: 16V Boost Duration: 120 min Temperature Compensation: -3mV/°C/2V Working Temperature: -20°F - 113°F Storage Temperature: -31°F - 176°F Max Gauge Size: Up to 8AWG Weight: 0.65 lbs Dimensions: 6.45 x 4.31 x 1.76 inches Enclosure: IP20 Options: BT-1 Bluetooth Module Model: BT-1 Input Voltage: 5V-12V Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤15m Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.6 X 2.01 X 0.61 In Installation Dimensions: 57.5, φ3.2mm (2.26, φ0.13in) Operation Temperature: -20°C to 75°C(-4°F to 167°F) Protection Grade: IP67 Weight: 120 g (4.2oz) Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Wanderer Li 30A PWM Solar Charge Controller (413)
52.51 AUD
Description The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use, the controller uses multiple LED indicators to notify users of charge status and battery information. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, the Renogy DC Home smart phone App, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks, including most 12V lithium models available on the market. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Optimized for a 12V system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Smart 4 Stage PWM charging (Bulk, Boost, Float, and Equalization) and temperature compensation increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current. Multiple LED indicators for easy to read charge status and battery information. Integrated RS232 port allows communication with BT-1 Bluetooth module and usage of the Renogy DC Home smart phone App. DOWNLOAD LINKS Package Includes Renogy Wanderer Li 30A PWM Charge Controller 1 x Options: BT-1 Bluetooth Module 1 x The Renogy Wanderer Li 30A Negative PWM Charge Controller Nominal Voltage: 12 VDC Max. PV Input Power: 400W Rated Charge Current: 30A Max. PV Input Voltage: 25 VDC Self-Consumption: High Voltage Disconnect: 16V Boost Duration: 120 min Temperature Compensation: -3mV/°C/2V Working Temperature: -20°F - 113°F Storage Temperature: -31°F - 176°F Max Gauge Size: Up to 8AWG Weight: 0.65 lbs Dimensions: 6.45 x 4.31 x 1.76 inches Enclosure: IP20 Options: BT-1 Bluetooth Module Model: BT-1 Input Voltage: 5V-12V Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤15m Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.6 X 2.01 X 0.61 In Installation Dimensions: 57.5, φ3.2mm (2.26, φ0.13in) Operation Temperature: -20°C to 75°C(-4°F to 167°F) Protection Grade: IP67 Weight: 120 g (4.2oz) Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Wanderer Li 30A PWM Solar Charge Controller (414)
52.51 AUD
Description The Renogy Wanderer-Li is a 30A PWM solar charge controller that integrates efficient PWM charging to increase battery life and improve system performance. Designed with a simple interface for ease of use, the controller uses multiple LED indicators to notify users of charge status and battery information. This newly improved model has two advanced features: an RS232 port and Lithium battery charging. With the addition of the RS232 port, users can now connect and communicate with the Renogy BT-1 Bluetooth module. By adding the BT-1 to the Wanderer-Li, you can now use the smartphone app, the Renogy DC Home smart phone App, to monitor and adjust your solar system remotely. With the inclusion of the Lithium Battery Mode, the 30A negative-ground controller is now capable of charging various 12V battery types and banks, including most 12V lithium models available on the market. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Optimized for a 12V system; Deep cycle Sealed, Gel, Flooded, and Lithium battery option ready. Smart 4 Stage PWM charging (Bulk, Boost, Float, and Equalization) and temperature compensation increases battery life and improves system performance. Intelligent protection against reverse polarity, overcharging, short-circuit, and reverse current. Multiple LED indicators for easy to read charge status and battery information. Integrated RS232 port allows communication with BT-1 Bluetooth module and usage of the Renogy DC Home smart phone App. DOWNLOAD LINKS Package Includes Renogy Wanderer Li 30A PWM Charge Controller 1 x Options: BT-1 Bluetooth Module 1 x The Renogy Wanderer Li 30A Negative PWM Charge Controller Nominal Voltage: 12 VDC Max. PV Input Power: 400W Rated Charge Current: 30A Max. PV Input Voltage: 25 VDC Self-Consumption: High Voltage Disconnect: 16V Boost Duration: 120 min Temperature Compensation: -3mV/°C/2V Working Temperature: -20°F - 113°F Storage Temperature: -31°F - 176°F Max Gauge Size: Up to 8AWG Weight: 0.65 lbs Dimensions: 6.45 x 4.31 x 1.76 inches Enclosure: IP20 Options: BT-1 Bluetooth Module Model: BT-1 Input Voltage: 5V-12V Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤15m Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.6 X 2.01 X 0.61 In Installation Dimensions: 57.5, φ3.2mm (2.26, φ0.13in) Operation Temperature: -20°C to 75°C(-4°F to 167°F) Protection Grade: IP67 Weight: 120 g (4.2oz) Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer - 36V/48V Rover Boost 10A MPPT Solar Charge Controller
177.65 AUD
Description The 10A Rover Boost charge controller is a unique solution that allows you to charge 36V or 48V battery banks with 12V or 24V low voltage solar panels—specially designed for golf carts and electric vehicles. Increase your driving mile range and battery life using the power of solar and the Rover Boost. Engineered to boost the panel's voltage while maintaining high-speed MPPT Technology Tracking, the Rover Boost is one of the industry's most powerful controllers perfectly suitable for limited spaces. With minimal configuration needed, the Rover Boost is preset to charge lead-acid and lithium batteries and supports the latest Renogy Bluetooth monitor giving you the option for remote monitoring and setting adjustments via smartphone. If you have any questions regarding this product, please submit a case ! Key Features Boost Charging Boosts the voltage of 12V or 24V solar panels to charge 36V or 48V batteries Wide Range Applications Increasing driving distance includes: electric vehicles, golf carts, scooters, trikes, and more 99% MPPT Charging Efficiency Advanced MPPT Technology with minimum 99% tracking efficiency and 90% charge conversion efficiency for 4-stage battery charging (Bulk, Boost, Float, and Equalization) with charging 4 Preset Battery Charge AGM/Sealed, Gel, Flooded, and Lithium. User mode also available for customizing charging Multiple Electronic Protections Protect your battery, controller, and solar—including over-charge protection, reverse polarity protection, and more! Bluetooth monitoring Add a Renogy Bluetooth Module (sold separately) and download the Renogy DC Home App for remote monitoring and customization. Package Includes 36V/48V Rover Boost 10A MPPT Solar Charge Controller 1 x 36V/48V Rover Boost 10A MPPT Solar Charge Controller Rated System Voltage 36V / 48V, Auto Recognition (Non-Lithium) Rated Charge Current 10A Battery Operating Range 30 ~ 65 VDC Battery Types AGM/Sealed, GEL, FLOODED, LFP, USER* Rated Max Charge Power PV Input Power: 500W/36V; 650W/48V Charging Power: 450W/36V; 600W/48V Max Input Current (short-circuit, Isc) 35A Power Limiting Protection Up to 600W/36V; 800W/48V Solar Input Voltage Range (VOC) 15 ~ 25VDC / 36V 15 ~ 40VDC / 48V MPPT Voltage Range 15 ~ 25VDC / 36V 15 ~ 40VDC / 48V MPPT Tracking Efficiency ≥ 99% MPPT Charge Conversion Efficiency ≥ 90% Idle Consumption ≤ 2W Operating Temperature Range -31°F ~ 149°F / -35 ℃ ~ + 65 ℃ Storage Temperature Range -40°F ~ 176°F / -40 ℃ ~ + 80 ℃ Temperature Compensation -3mV / ℃ / 2V (Non-Lithium) 0mV / ℃ / 2V; no compensation (Lithium) Grounding Type Common Negative Lug (M3) Enclosure Rating IP20 Humidity 0-95% RH Electronic Protections Battery overcharging, Battery over discharge, Battery reverse polarity protection, PV reverse polarity, PV Reverse flow, PV short-circuit protection, Controller internal over-temperature protection, Charging over-current protection Communication RS485 /...
Renogy Dealer---Voyager 20A PWM Waterproof Solar Charge Controller (469)
57 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. If you have any questions regarding this product, please submit a case! Key Features 12V/24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 20A PWM Waterproof Solar Charge Controller 1 x Specifications Nominal Voltage: 12V/24V Grounding: Common Positive Rated Charge Current: 20A Max. PV Input Voltage: 55 VDC Self-consumption: 0 .24W (12V)/0.74W (24V) Max. PV Power: 260W (12V) / 520W (24V) Operating Temperature: -31°F - 113°F Storage Temperature: -31°F - 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25 kg Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Voyager 20A PWM Waterproof Solar Charge Controller (468)
57 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. If you have any questions regarding this product, please submit a case! Key Features 12V/24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 20A PWM Waterproof Solar Charge Controller 1 x Specifications Nominal Voltage: 12V/24V Grounding: Common Positive Rated Charge Current: 20A Max. PV Input Voltage: 55 VDC Self-consumption: 0 .24W (12V)/0.74W (24V) Max. PV Power: 260W (12V) / 520W (24V) Operating Temperature: -31°F - 113°F Storage Temperature: -31°F - 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25 kg Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Voyager 20A PWM Waterproof Solar Charge Controller
57 AUD
Description Featuring a bright blue back-lit LCD displaying system information including error codes, the Voyager is engineered to be of world-class quality. Not only is it waterproof, but it is also equipped with advanced PWM technology suitable for 12V and 24V off-grid applications, and compatible with 4 different battery types, including Lithium! Ensure your system's longevity and stay worry-free as the Voyager also has you covered with multiple solar panel, battery, and controller protections. If you have any questions regarding this product, please submit a case! Key Features 12V/24V Battery Compatibility with Auto Recognition. Smart 4 Stage PWM charging: Bulk, Absorption, Float, and Equalization. 4 Battery Type Compatible – Sealed/AGM, Gel, Flooded, and Lithium batteries, with Lithium Awakening feature. Watertight design with Backlit LCD display for system information including error codes. Multiple Protections for Battery, Controller, and Solar Panels including reverse polarity and more. Package Includes New Edition Voyager 20A PWM Waterproof Solar Charge Controller 1 x Specifications Nominal Voltage: 12V/24V Grounding: Common Positive Rated Charge Current: 20A Max. PV Input Voltage: 55 VDC Self-consumption: 0 .24W (12V)/0.74W (24V) Max. PV Power: 260W (12V) / 520W (24V) Operating Temperature: -31°F - 113°F Storage Temperature: -31°F - 167°F Enclosure: IP67 Dimensions: 6.08 x 3.83 x 1.40 in / 15.44 x 9.73 x 3.56 cm Terminals: 20-6 AWG, 2 pin connectors Weight: 0.55 lbs / 0.25 kg Warranty Information Accessories 1-year material warranty Certification
Renogy Dealer---Rover Li 30 Amp MPPT Solar Charge Controller
145.48 AUD
Description Meet the newest addition to the Renogy Rover Series, the 30A Rover-Li MPPT Charge Controller. The Rover-Li is not only capable of self-diagnosing errors, but it can also automatically detect 12V/24V systems. Pair this MPPT charge controller with the battery of your choice, from sealed to lithium. This 30A charge controller is encapsulated with a sturdy case that protects against general wear and tear. It also includes an aluminum heat sink for heat dissipation. Compatible with the Renogy BT-1 Bluetooth Module, users can connect to and monitor their solar power systems in real time, straight from their phones. If you have any questions regarding this product, please submit a case! Key Features Compatible with 12V and 24V systems. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. The Rover is a negative ground controller, which ensures compatibility with any negative ground system. Any negative connection on the solar module, battery, and load can be safely earth-grounded as required. Featuring innovative MPPT (maximum power point tracking) technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system. 4-stage charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system's performance. Intelligent protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. RS232 port to communicate with BT-1 Bluetooth module. Package Includes Rover Li 30 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 30 Amp MPPT Solar Charge Controller Rated Battery Current: 30A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in Net Weight: 4.41 lb. Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 40 Amp MPPT Solar Charge Controller (404)
174.74 AUD
Description Meet the newly redesigned 40A Rover MPPT Charge Controller. This smart charge controller is capable of conveniently self-diagnosing itself in the event of an error and can be used with the Bluetooth Module, Renogy BT-1. By pairing the Rover with the BT-1 and the Renogy DC Home smart phone App through Bluetooth, users can monitor and adjust their solar system straight from their phones. The Rover was also built tough with a die-cast aluminum exterior which allows for safe heat dissipation and general protection from wear and tear. If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Features diverse load control; also capable of charging over-discharged lithium batteries. Die-cast aluminum design allows for efficient heat dissipation. RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 40 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 40 Amp MPPT Solar Charge Controller Rated Battery Current: 40A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in (238 x 173 x 72 mm) Net Weight: 4.41 lb / 2kg Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer - 600 Watt 24 Volt Monocrystalline Solar Starter Kit w/ MPPT Charge Controller
935.99 AUD
Description Renogy 600W Starter Kit MPPT allows you to get the most efficiency possible out of your 24V solar system. With its charge controller that uses Maximum Power Point Tracking technology; you won't have to wonder if you are getting the most out of your system — you are. Efficiency is the key features that Renogy Starter Kit MPPT has to offer; and could be perfect for you. If you have any questions regarding this product, please submit a case ! Key Features Efficient High solar cell efficiency : Monocrystalline 18.4% Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. The included MPPT charge controler has a peak efficiency of 97%. Reliable EL tested solar modules; no hot-spot heating guaranteed Corrosion-resistant aluminum frame for extended outdoor use; allowing the panels to last for decades TPT back sheet ensures smooth performance over a long period of time IP65 rated junction box provides complete protection against environmental particles and low pressure water jets Intuitive Sealed; Gel and Flooded charging algorithim ready 4-Stage battery charging process for a rapid; efficient; and safe battery charging Timer function with 1-15 hour option Safe The Renogy Wanderer is equipped with multiple electronic protections; overcharging; overload; short-circuit and reversed polarity Pre-drilled holes on the back of the panel allow for fast and secure mounting Expandable With a Renogy 40A MPPT Charge Controller; you can expand your system up to a maximum of 400W (12 Volt) or 800W (24 Volt) Package Includes 100W Monocrystalline Panel 6 x Rover Li 40A MPPT Charge Controller 1 x Mounting Z Brackets 6 x 20ft 10AWG MC4 Adaptor Kit 1 x 8ft 10AWG Tray Cables (A pair) 1 x MC4Y Connector 1 x 100W Monocrystalline Solar Panel(Compact Design) Rover - 40A MPPT Charge Controller Maximum Power: 100W Nominal system voltage :12V/24V Auto Recognition Maximum System Voltage:600V DC (UL) Rated Battery Current :40A Open-Circuit Voltage (Voc): 24.3V Rated Load Current: 20A Short-Circuit Current (Isc): 5.21A Max. PV Input Short Current :50A Optimum Operating Voltage (Vmp): 20.4V Max. Battery Voltage :32V Optimum Operating Current (Imp): 4.91A Max Solar Input Voltage :100 VDC Weight: 14.1 lbs/6.4 kg Max Terminal Size :8AWG Dimensions: 41.8 X 20.9 X 1.4 In / 106.2 X 53.1 X 3.6 cm Net Weight :4.41 lb Overall Dimension:9.37 x 6.81 x 2.85in 8ft 10AWG Tray Cables (A pair) Mounting Z Brackets (Set) Length: 8ft Eight Long Cap Bolts and Four Short Bolts AWG: 10 Four Spring Washers and Four Washers Rating Voltage: 600/1000V Four Z Shape Solar Panel Brackets Temperature: -40°F to +185°F Four Nuts Adaptor Kit (Set) Length: 20ft Rating Voltage: 600/1000V AWG: 10 Temperature: -40°F to +185°F Warranty Information Panels 25-year transferable power output warranty: 5 year/95% efficiency rate; 10 year/90% efficiency rate; 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year...
Renogy Dealer---Rover Li 30 Amp MPPT Solar Charge Controller (400)
145.48 AUD
Description Meet the newest addition to the Renogy Rover Series, the 30A Rover-Li MPPT Charge Controller. The Rover-Li is not only capable of self-diagnosing errors, but it can also automatically detect 12V/24V systems. Pair this MPPT charge controller with the battery of your choice, from sealed to lithium. This 30A charge controller is encapsulated with a sturdy case that protects against general wear and tear. It also includes an aluminum heat sink for heat dissipation. Compatible with the Renogy BT-1 Bluetooth Module, users can connect to and monitor their solar power systems in real time, straight from their phones. If you have any questions regarding this product, please submit a case! Key Features Compatible with 12V and 24V systems. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. The Rover is a negative ground controller, which ensures compatibility with any negative ground system. Any negative connection on the solar module, battery, and load can be safely earth-grounded as required. Featuring innovative MPPT (maximum power point tracking) technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system. 4-stage charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system's performance. Intelligent protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. RS232 port to communicate with BT-1 Bluetooth module. Package Includes Rover Li 30 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 30 Amp MPPT Solar Charge Controller Rated Battery Current: 30A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in Net Weight: 4.41 lb. Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 40 Amp MPPT Solar Charge Controller
174.74 AUD
Description Meet the newly redesigned 40A Rover MPPT Charge Controller. This smart charge controller is capable of conveniently self-diagnosing itself in the event of an error and can be used with the Bluetooth Module, Renogy BT-1. By pairing the Rover with the BT-1 and the Renogy DC Home smart phone App through Bluetooth, users can monitor and adjust their solar system straight from their phones. The Rover was also built tough with a die-cast aluminum exterior which allows for safe heat dissipation and general protection from wear and tear. If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Features diverse load control; also capable of charging over-discharged lithium batteries. Die-cast aluminum design allows for efficient heat dissipation. RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 40 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 40 Amp MPPT Solar Charge Controller Rated Battery Current: 40A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in (238 x 173 x 72 mm) Net Weight: 4.41 lb / 2kg Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Elite 40A MPPT Solar Charge Controller (643)
188.77 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and identifying error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 40 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 40 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 40A Max Battery Voltage : 32V PV Input Voltage Range : 15V – 100V VOC Max Power Input : 12V @ 520W 24V @ 1040W Self Consumption: ≤0.6W @12V;≤0.8W @24V Grounding Type : Negative Controller Terminals : 20-6 AWG Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C/ -31°F ~ 113°F Storage Temperature: -40°C~ 80°C/ -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 199.5 x 130 x 76.7 mm/ 7.85 x 5.12 x 3.02 in Weight: 1.36 kg/ 3 lbs Enclosure: IP32 Communication: RS485 Certification : FCC Part 15 Class B; CE; RoHS; RCM Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Elite 20A MPPT Solar Charge Controller (362)
142.9 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 20 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 20A Max Power Input: 12V @ 260W; 24V @ 520W PV Input Voltage Range : 15V – 100V VOC Max Battery Voltage: 32V Self Consumption: ≤0.6W @12V£»≤0.8W @24V Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C / -31°F ~ 113°F Storage Temperature: -40°C~ 80°C / -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 161.5 x 97.9 x 66.5 mm/ 6.36 x 3.85 x 2.62 in Weight: 0.75 kg/1.65 lbs Enclosure: IP32 Communication: RS485 Grounding Type: Common Negative Controller Terminals: 20-6 AWG Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Elite 20A MPPT Solar Charge Controller (644)
142.9 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 20 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 20A Max Power Input: 12V @ 260W; 24V @ 520W PV Input Voltage Range : 15V – 100V VOC Max Battery Voltage: 32V Self Consumption: ≤0.6W @12V£»≤0.8W @24V Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C / -31°F ~ 113°F Storage Temperature: -40°C~ 80°C / -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 161.5 x 97.9 x 66.5 mm/ 6.36 x 3.85 x 2.62 in Weight: 0.75 kg/1.65 lbs Enclosure: IP32 Communication: RS485 Grounding Type: Common Negative Controller Terminals: 20-6 AWG Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Elite 20A MPPT Solar Charge Controller (363)
142.9 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 20 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 20A Max Power Input: 12V @ 260W; 24V @ 520W PV Input Voltage Range : 15V – 100V VOC Max Battery Voltage: 32V Self Consumption: ≤0.6W @12V£»≤0.8W @24V Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C / -31°F ~ 113°F Storage Temperature: -40°C~ 80°C / -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 161.5 x 97.9 x 66.5 mm/ 6.36 x 3.85 x 2.62 in Weight: 0.75 kg/1.65 lbs Enclosure: IP32 Communication: RS485 Grounding Type: Common Negative Controller Terminals: 20-6 AWG Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Li 100A 12/24/36/48V MPPT Solar Charge Controller (397)
669.99 AUD
Description Introducing the new 100A Rover MPPT Charge Controller, the largest Rover controller that Renogy has to offer. Capable of supporting up to 1300 watts on 12 volts, 2600 watts on 24 volts, 3900 watts on 36V and 5200 watts on 48V. This off-grid controller was designed for large-scale projects, both mobile and stationary. For even more power, users can utilize a unique feature limited to this Rover and connect two 100A Rover controllers in parallel for a total of 200 amps! This smart charge controller can also conveniently self-diagnose itself in the event of an error and can be remotely controlled through the Renogy BT app using the Renogy BT-1 Bluetooth Module. By pairing the Rover with the BT-1 and the Renogy BT app through Bluetooth, users can easily monitor and adjust their solar system straight from their phones. If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V, 24V, 36V and 48V DC system voltages. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Capable of charging over-discharged lithium batteries. RS232 and RS485 ports. RS232 allows the Rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. RS485 allows Rovers to be parallled. DOWNLOAD LINKS Package Includes Rover Li 100 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Controller Paralleling Cable 1 x Options: BT-1 Bluetooth Module 1 x Rover 100 Amp MPPT Solar Charge Controller Nominal Voltage: 12V/24V/36V/48V Auto Recognition Rated Charge Current:100A Max. PV Input Power: 1300W/12V; 2600W/24V; 3900W/36V; 5200W/48V Max. PV Input Voltage: 150VDC (25°C), 140VDC(-25°C) Self-Consumption: 2.7W - 2.9W Operating Temperature: -35°C to +45°C Temperature Compensation: -3mV/°C/2V (default) Dimensions: 12.00 x 17.44 x 4.35 in / 30.5 x 44.3 x 11.1 cm Weight: 22 lb. / 10 kg Enclosure: IP32 Terminals: 25mm², 4AWG Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 100A 12/24/36/48V MPPT Solar Charge Controller (398)
669.99 AUD
Description Introducing the new 100A Rover MPPT Charge Controller, the largest Rover controller that Renogy has to offer. Capable of supporting up to 1300 watts on 12 volts, 2600 watts on 24 volts, 3900 watts on 36V and 5200 watts on 48V. This off-grid controller was designed for large-scale projects, both mobile and stationary. For even more power, users can utilize a unique feature limited to this Rover and connect two 100A Rover controllers in parallel for a total of 200 amps! This smart charge controller can also conveniently self-diagnose itself in the event of an error and can be remotely controlled through the Renogy BT app using the Renogy BT-1 Bluetooth Module. By pairing the Rover with the BT-1 and the Renogy BT app through Bluetooth, users can easily monitor and adjust their solar system straight from their phones. If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V, 24V, 36V and 48V DC system voltages. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Capable of charging over-discharged lithium batteries. RS232 and RS485 ports. RS232 allows the Rover to communicate with the BT-1 Bluetooth module, which can pair with the Renogy BT smartphone app. RS485 allows Rovers to be parallled. DOWNLOAD LINKS Package Includes Rover Li 100 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Controller Paralleling Cable 1 x Options: BT-1 Bluetooth Module 1 x Rover 100 Amp MPPT Solar Charge Controller Nominal Voltage: 12V/24V/36V/48V Auto Recognition Rated Charge Current:100A Max. PV Input Power: 1300W/12V; 2600W/24V; 3900W/36V; 5200W/48V Max. PV Input Voltage: 150VDC (25°C), 140VDC(-25°C) Self-Consumption: 2.7W - 2.9W Operating Temperature: -35°C to +45°C Temperature Compensation: -3mV/°C/2V (default) Dimensions: 12.00 x 17.44 x 4.35 in / 30.5 x 44.3 x 11.1 cm Weight: 22 lb. / 10 kg Enclosure: IP32 Terminals: 25mm², 4AWG Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 20 Amp MPPT Solar Charge Controller (370)
104.99 AUD
Description The 20A Rover MPPT Charge Controller features a die-cast aluminum shell that is perfect for heat dissipation while also protecting against general wear and tear. This intelligent controller is not only capable of up to 99% tracking efficiency, but can also self-diagnose system faults. This charge controller displays error codes that can be easily looked up. Capable of automatically detecting 12V/24V systems, this crucial system component can also handle various battery options such as GEL and Lithium. Pair this charge controller with the Renogy BT-1 and the Renogy DC Home smart phone App to view system performance in real time and make parameter changes without having to get up! If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98% Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes Features diverse load control; also capable of charging over-discharged lithium batteries Die-cast aluminum design allows for efficient heat dissipation RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 20 Amp MPPT Solar Charge Controller Nominal system voltage: 12V/24V Auto Recognition Rated Battery Current: 20A Rated Load Current: 20A Max. PV Input Short Current: 25A Max. Battery Voltage: 32V Max Solar Input Voltage: 100 VDC Mounting Oval: 0.30 x 0.18in Net Weight: 3.08 lb. Discharge circuit voltage drop: ≤ 0.15V Overall Dimension: 8.27 x 5.94 x 2.34 in Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) PInstallation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Li 30 Amp MPPT Solar Charge Controller (401)
145.48 AUD
Description Meet the newest addition to the Renogy Rover Series, the 30A Rover-Li MPPT Charge Controller. The Rover-Li is not only capable of self-diagnosing errors, but it can also automatically detect 12V/24V systems. Pair this MPPT charge controller with the battery of your choice, from sealed to lithium. This 30A charge controller is encapsulated with a sturdy case that protects against general wear and tear. It also includes an aluminum heat sink for heat dissipation. Compatible with the Renogy BT-1 Bluetooth Module, users can connect to and monitor their solar power systems in real time, straight from their phones. If you have any questions regarding this product, please submit a case! Key Features Compatible with 12V and 24V systems. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. The Rover is a negative ground controller, which ensures compatibility with any negative ground system. Any negative connection on the solar module, battery, and load can be safely earth-grounded as required. Featuring innovative MPPT (maximum power point tracking) technology with high tracking efficiency up to 99%, maximizing the energy from solar panels to charge your system. 4-stage charging (Bulk, Boost, Float, and Equalization) and temperature compensation increase your battery life and improve your system's performance. Intelligent protection built-in against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. RS232 port to communicate with BT-1 Bluetooth module. Package Includes Rover Li 30 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 30 Amp MPPT Solar Charge Controller Rated Battery Current: 30A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in Net Weight: 4.41 lb. Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module
Renogy Dealer---Rover Elite 20A MPPT Solar Charge Controller
142.9 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 20 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 20 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 20A Max Power Input: 12V @ 260W; 24V @ 520W PV Input Voltage Range : 15V – 100V VOC Max Battery Voltage: 32V Self Consumption: ≤0.6W @12V£»≤0.8W @24V Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C / -31°F ~ 113°F Storage Temperature: -40°C~ 80°C / -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 161.5 x 97.9 x 66.5 mm/ 6.36 x 3.85 x 2.62 in Weight: 0.75 kg/1.65 lbs Enclosure: IP32 Communication: RS485 Grounding Type: Common Negative Controller Terminals: 20-6 AWG Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Elite 40A MPPT Solar Charge Controller
188.77 AUD
Description The Rover Elite series of MPPT charge controllers give you the most efficient charging for countless 12V or 24V off-grid solar applications. Compatible with an assortment of batteries, including Lithium, the Rover Elite MPPT utilizes powerfully smart tracking technology to maximize solar charging energy to your battery. Additionally, the Rover Elite MPPT is equipped with multiple battery, controller, and solar protections giving you peace of mind and an optimized system you can trust. If you have any questions regarding this product, please submit a case! Key Features 12V /24V Automatic System Recognition. Backlit LCD displays system information and identifying error codes. Advanced MPPT Technology with up to 99% high tracking efficiency, 96% conversion efficiency, and Lithium-reawakening feature. 4 Deep Cycle Battery Pre-Sets: Gel, Flooded, Lithium-Iron Phosphate (12.8V), and Sealed/AGM. Multiple Electronic Protection Features, including over-charging, over-discharging, reverse polarity, over-load, and over-temperature. DOWNLOAD LINKS Package Includes Rover Elite 40 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-2 Bluetooth Module 1 x Rover Elite 40 Amp MPPT Solar Charge Controller System Voltage : 12V/24V Auto Recognition Battery Rated Current : 40A Max Battery Voltage : 32V PV Input Voltage Range : 15V – 100V VOC Max Power Input : 12V @ 520W 24V @ 1040W Self Consumption: ≤0.6W @12V;≤0.8W @24V Grounding Type : Negative Controller Terminals : 20-6 AWG Temperature Compensation: -3mV/℃/2V, excludes LI Operating Temperature: -35°C~ 65°C/ -31°F ~ 113°F Storage Temperature: -40°C~ 80°C/ -40°F ~ 176°F Operating/Storage Humidity: < 90%, No Condensation Dimensions: 199.5 x 130 x 76.7 mm/ 7.85 x 5.12 x 3.02 in Weight: 1.36 kg/ 3 lbs Enclosure: IP32 Communication: RS485 Certification : FCC Part 15 Class B; CE; RoHS; RCM Options: BT-2 Bluetooth Module Communication Protocol: RS485 Port Type: RJ45 Input Voltage: 5V or 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Installation Dimensions: 67.3 φ3.5mm（2.66 φ 0.14in） Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-2 Bluetooth Module
Renogy Dealer---Rover Li 40 Amp MPPT Solar Charge Controller (405)
174.74 AUD
Description Meet the newly redesigned 40A Rover MPPT Charge Controller. This smart charge controller is capable of conveniently self-diagnosing itself in the event of an error and can be used with the Bluetooth Module, Renogy BT-1. By pairing the Rover with the BT-1 and the Renogy DC Home smart phone App through Bluetooth, users can monitor and adjust their solar system straight from their phones. The Rover was also built tough with a die-cast aluminum exterior which allows for safe heat dissipation and general protection from wear and tear. If you have any questions regarding this product, please submit a case! Key Features Automatically detects 12V or 24V DC system voltages. Compatible with various Deep Cycle battery options: Sealed, Gel, Flooded, and Lithium. Innovative MPPT technology with high tracking efficiency up to 99% and peak conversion efficiency of 98%. Electronic protection against reverse polarity, overcharging, over-discharging, overload, short-circuiting, and reverse current. LCD screen and multiple LED indicators for displaying system operation information, customizable parameters, and error codes. Features diverse load control; also capable of charging over-discharged lithium batteries. Die-cast aluminum design allows for efficient heat dissipation. RS232 port to communicate with BT-1 Bluetooth module. DOWNLOAD LINKS Package Includes Rover Li 40 Amp MPPT Charge Controller 1 x Remote Temperature Sensor 1 x Options: BT-1 Bluetooth Module 1 x Rover 40 Amp MPPT Solar Charge Controller Rated Battery Current: 40A Rated Load Current:20A Max. PV Input Short Current: 50A Max. Battery Voltage: 32V Max Solar Input Voltage: 100VDC Charge circuit voltage drop: ≤ 0.26V Discharge circuit voltage drop: ≤ 0.15V Working Temperature: -35°C to +45°C Max Terminal Size: 8AWG Rated Load Current: 10% to 90% NC Overall Dimension: 9.37 x 6.81 x 2.85 in (238 x 173 x 72 mm) Net Weight: 4.41 lb / 2kg Options: BT-1 Bluetooth Module Communication Protocol: RS232 Port Type: RJ12 Input Voltage: 12V Protection Grade: IP54 Standby Power Consumption: 0.04W Operating Power Consumption: 0.05W Communication Range: ≤82ft Serial Baud Rate: Fixed Baud Rate 9600bps Cable Length: 5.00 m (16.4 ft) Dimensions: 2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm) Operation Temperature: -20℃~85℃（-4°F to 185°F） Weight: 130g (4.58oz) Warranty Information Accessories 1-year material warranty Certification Please click the links below to download Manual: Renogy BT-1 Bluetooth Module