LatestBuy Flat Panel UHF/VHF Digital Antenna with Amplifier for Indoor
125.9 AUD
Browse the detailed sheet with complete information, compare prices and identify the features of LatestBuy Flat Panel UHF/VHF Digital Antenna with Amplifier for Indoor, offered at the cost of 125.9 AUD; it belongs to the Amplifiers & Receivers category; the seller is LatestBuy Flat Panel UHF/VHF Digital Antenna with Amplifier for Indoor and the manufacturer is LatestBuy.
An indoor antenna that will sit unobtrusively near your TV. An extremely capable unit featuring signal clear technology with extremely low noise circuitry. It is able to pick up both UHF/VHF signals as well as DAB+ radio. It is also coupled with a separate amplifier with independent UHF and VHF gain adjustments to give you greater control over your signal. The amplifier can be powered with the supplied mains adaptor or from a USB cable (mini plug lead not supplied). Though the unit does not require the amplifier, it may be necessary for areas with weak indoor reception. Features: Impedence: 75Ohm Channels: 0-12, 20-75
EAN: 9319236980248
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
An indoor antenna that will sit unobtrusively near your TV. An extremely capable unit featuring signal clear technology with extremely low noise circuitry. It is able to pick up both UHF/VHF signals as well as DAB+ radio. It is also coupled with a separate amplifier with independent UHF and VHF gain adjustments to give you greater control over your signal. The amplifier can be powered with the supplied mains adaptor or from a USB cable (mini plug lead not supplied). Though the unit does not require the amplifier, it may be necessary for areas with weak indoor reception. Features: Impedence: 75Ohm Channels: 0-12, 20-75
EAN: 9319236980248
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
LatestBuy Outdoor UHF/VHF/MARINE TV Antenna w/ Rotation Motor
171.9 AUD
part of Aust/NZ this antenna works on all frequencies (Some better than others, we admit). It covers VHF low, down to 47MHz (channel 2) to UHF up to 862MHz (channel 69). It includes a signal amplifier (240VAC adaptor supplied) AND a rotator motor built into the antenna housing AND a remote control for that. It also comes with approx. 8 metres of TV lead with a weatherproof plug on one end. Includes booster amp which will drive two televisions Compatible with our telescopic mast systems (sold separately) Supplied with other hardware Output 80 dbuV. Antenna measures: 750(W) (deployed) x 300(L) x 100(D)mm (Folds down for storage) Note: Not suitable for salt water environments
Kingray Kingray VHF/UHF Masthead Amp with LTE/4G Filters
241.9 AUD
As you may be aware by now, a large chunk of the Australian TV broadcast spectrum is being reallocated for the next generation 4G/LTE mobile phone service. To guard against this, Kingray have produced this Australian made masthead amp that provides a good VHF & UHF TV band gain, and user selectable filters for FM radio, fixed pagers, and the new 4G/LTE band. Supplied with AC power injector and F-type to PAL adaptors.
LatestBuy UHF/VHF Outdoor Omni Amplified Digital Antenna
205.9 AUD
With inbuilt low noise and high gain booster, this compact and weather resistant outdoor digital antenna is ideally suited for caravans, boats, and other fixed or mobile applications where space is constrained or harsh environmental conditions require a little extra durability. Excellent wide frequency reception for local free-to-air analogue and digital TV, DAB+ digital radio as well as FM radio transmissions. It can be either base mounted or mast mounted; and includes mounting bracket, 12V mains power adaptor and a 12V in-car charger. SMD technology Anti-rust and UV protected FM 87.5 - 108MHz VHF 174-230MHz UHF 470-862MHz Output level : Max 108dB Impedance: 75 ohms
LatestBuy Stainless Steel VHF Marine Antenna (475mm)
48.9 AUD
This 1/4 wave marine antenna is made from high-grade stainless steel and works best with a ground plane such as the centre of a metal roof. Stainless Steel antennas are generally capable of handling abusive environments and have a longer lifespan compared to braided fibreglass whips, although they do have a slightly reduced electrical performance. It is fitted with a standard 27TPI threaded ferrule for easy mounting to a standard base. Features: Stainless Steel Construction 27TPI Screw Mount
LatestBuy Digimatch VHF/UHF 27 Element TV Antenna
313.9 AUD
Features: Gain - VHF 7dB, UHF 11dB Avg. VSWR - 1.9:1 Avg. F/B Ratio - VHF 12dB, UHF 18dB Channels - 6-12, 28-69 Boom Length - 1320mm
LatestBuy UHF/VHF Passive Indoor TV Rabbit Antenna Desk or Wall Mount
36.9 AUD
The traditional "rabbit"; ears antenna for the modern day. With flat screen TV's, rabbit ear antennas no longer have the ideal spot sitting on top of the set. These rabbit ears can sit flat on a surface or be mounted on to a wall. Suitable for areas with strong television reception. Features: Suits digital TV signals Mounting hardware included Cable length: 1.6m
LatestBuy UHF Phased Array Digital Signal TV Antenna
241.9 AUD
This heavy duty UHF phased array is ideal for problem digital reception areas where you may not have direct line of sight to the transmitter or there may be multipath issues due to reflected signals. It is capable of receiving either horizontal or vertical signals by changing the orientation of the heavy duty mounting bracket/U-bolt assembly. The LTE filter provides protection against 4G/LTE telephone communications.
RTM Fibreglass VHF Marine Antenna (156-162MHz)
153.9 AUD
Includes 1.5m (5') fibreglass VHF antenna, 5m (17') cable with PL259 connector and dual swivel corrosion resistant nylon base with mounting hardware.
LatestBuy Slim Digital TV Indoor Antenna w/ Amplifier
89.9 AUD
This digital TV antenna is fitted with an LTE/4G filter which protects your TV from mobile broadband interference. It also features adjustable gain as well as telescopic dipoles and an adjustable loop aerial for optimal performance. Specifications: Max Output: 90dBuV Max Noise: 1.5/1.8dB (VHF/UHF) Frequency: VHF: 174-230MHz / UHF: 470-694MHz
Moki Digital TV Antenna Lead
24.9 AUD
Access high-definition TV channels effortlessly with Moki's Digital TV Antenna Lead. Enjoy crystal-clear reception and free-to-air channels without the hassle of cable subscriptions.
Gefu Digital Roasting Thermometer with Timer - Punto
94.9 AUD
GEFU Punto Digital Roasting Thermometer is equipped with a timer, for perfect cooking results. The new cooking thermometer Punto is equipped with a timer, for perfect cooking results. Touch Screen allows you to select the type of flat and the alarm will warn you when the ideal temperature is reached. It can be used on the grill, in the oven or on the stove. Its touch screen makes it easy to use. It measures temperatures from 0 to 250 degree celsius with a stainless steel sensor probe, it counts up or down to 99 minutes and 59 seconds.
GME GME UHF Car Antenna 6.6dBi with 4.5m Cable - 1.1m
587.9 AUD
This is for semi-serious off-road driving. It is meant to be bull-bar mounted. It features a medium coil spring base coupled to a very strong fibreglass whip mast that is actually 30mm (1¼=) diameter where it connects to the spring base. This is the sort of whip antenna that will not be broken by bush saplings, or other heavy undergrowth. It comes with 4.5 metres of RG58 commercial grade coax and a screw-demountable UHF PL259 plug. You can remove the plug to feed the cable through narrow openings, holes, etc and reassemble at the back of the rig later. Many professional bull-bars will have a horizontal mounting plate and the base of this unit will go straight on via a (13mm) hole. Or you can use a heavy duty mounting bracket such as the DC3077 stainless steel unit.
LatestBuy Mini UHF Log Periodic Element Antenna
135.9 AUD
This UHF mini log periodic antenna has been specifically designed for Digital TV reception. It is supplied with an easy to install mounting bracket and "J"; mast. Compact in size the antenna is capable of being installed vertically or horizontally and with 7.5dB of gain is the ideal reception solution for areas with medium levels of signal. Specifications: Element: 20 Band: 4-5 Channels: 21-69 Frequency: 470-862MHz Gain: 7.5dB F/B Ratio: 21dB Overall Length: 400mm Maximum Width: 311mm
LatestBuy 4G LTE Filter 20dB Boost TV Signal Amplifier Plug In
117.9 AUD
This TV amplifier with 4G filter is ideal for improving reception on a single TV whilst simultaneously eliminating intereference from mobile phone signals. To use, simply plug into electrical socket, connect TV antenna cable into the 'ANT' socket and the TV / VCR cable into the 'TV' socket. Once proper connection is made, turn the power on and select gain level as required. Includes 2 x 'F' Type male to PAL female connectors. Features: 4G LTE filter output 694-862MHz Power: 240VAC/50Hz 10A 2.5Watt Low Noise 3dB Built in LED indicator RF shielded internal metal housing For indoor use only
GME GME UHF Car Antenna 6.6dBi with 4.5m Cable - 1.2m
647.9 AUD
This is for semi-serious off-road driving. It is meant to be bull-bar mounted. It features a medium coil spring base coupled to a very strong fibreglass whip mast that is actually 30mm (1¼=) diameter where it connects to the spring base. This is the sort of whip antenna that will not be broken by bush saplings, or other heavy undergrowth. It comes with 4.5 metres of RG58 commercial grade coax and a screw-demountable UHF PL259 plug. You can remove the plug to feed the cable through narrow openings, holes, etc and reassemble at the back of the rig later. Many professional bull-bars will have a horizontal mounting plate and the base of this unit will go straight on via a (13mm) hole. Or you can use a heavy duty mounting bracket such as the DC3077 stainless steel unit.
LatestBuy Wireless UHF Microphone and Receiver
171.9 AUD
Add wireless functionality to your wired-setup with this plug-in receiver and wireless UHF microphone. It provides standard 6.5mm plug-in functionality to suit just about any PA system or amplifier. The microphone is powered by 2 x AA batteries (not included) and the receiver is USB rechargeable which is ideal for functions, weddings or street performers. Features up to 40m range and has 7 selectable UHF channels to reduce interference. Includes USB charging cable. Specifications: Microphone Type: Omni-Directional UHF Frequency: 520-526MHz Transmission Distance: Up to 40m Receiver Output: 6.5mm Frequency Response: 30Hz-20KHz Sensitivity: -54dB (+-3dB) Working Time: Up to 9 Hours (Microphone) Up to 5 Hours (Receiver) Charging Time: 3-4 Hours Batteries: 2 x AA (Microphone) Li-ion 3.7V, 550mAh (Receiver) Power: 5VDC, 500mA (Micro B USB) (Receiver) Dimensions: 250(L) x 54(Dia)mm (Microphone) 105(L) x 36(W) x 19(H) (Receiver)
Bourne UHF External Antenna Base (4.5m)
81.9 AUD
Designed for use with our fixed installation transceiver unit (DC1120) to enable you to add a larger antenna for better communication range. The antenna base can be mounted in a bracket and a suitable sized hole should be drilled for the PL259 plug to pass through for connection to the fixed unit. PL259 connection: 17(dia)mm. RG58 Coax Cable.
Digitech Wireless UHF Clip Lapel Microphone and Receiver
171.9 AUD
An easy to use wireless UHF lapel microphone system is perfect for a number of applications. The transmitter, rechargeable via USB, is a compact sized case with a 6.5mm jack that connects directly to an input of a speaker, mixer or amplifier. The lapel microphone with 1.8m cable connects to the belt pack transmitter that clips onto your waist or fits into your pocket. The belt pack transmitter has up to 7 selectable UHF frequencies, volume control and is also rechargeable by USB. The systems effective range is up to 30m on average, making it ideal for street announcers/performers, pubs, club functions, etc. Features: - Up to 30m Wireless Range - Up to 6 Hours Hours Play Time - USB Rechargeable Batteries - 7 Selectable UHF Frequencies - 6.5mm Receiver Output - Uni-Directional Lapel Mic Box Contents: 1 x Wireless UHF Belt Pack Transmitter 1 x Wireless UHF Receiver 1 x Lapel Microphone 1 x 6.5mm Socket to 3.5mm Plug Adaptor 1 x 2-Way USB Charging Cable
LatestBuy VHF Converter Kit (100-200MHz)
35.9 AUD
Kwik Kit logo, 45 min logo, Simple logo This simple to build kit makes it feasible to receive, for example, taxis, amateur radio operators, marine radio, television audio carriers, etc. The kit connects in-line with your VHF receiver's antenna avoiding messy installation and receiver modifications.
TechBrands Flat Metal Rack Mount Enclosure Panel - 2 Unit
37.9 AUD
2U 19 plain blank panel for filling in unused space or configuring to your own requirements. With a black powder coated steel finish. Includes set of mounting screws/washers/etc (see picture).
TechBrands Flat Metal Rack Mount Enclosure Panel - 1 Unit
34.9 AUD
1U 19 plain blank panel for filling in unused space or configuring to your own requirements. With a black powder coated steel finish. Includes set of mounting screws/washers/etc (see picture).
Bourne Satking Satellite Finder with Digital Satellite Meter
267.9 AUD
A digital satellite finder designed for VAST satellite TV systems. The unit has been pre-programmed with the VAST paraFinders pre-set making it very easy to use. Simply plug the unit in to the dish and use the signal level bars to align your dish. Then plug the antenna cable into your vast receiver or Foxtel STB and it will scan the channels in for you. The unit has a built in high power battery so it does not need to be connected to the VAST receiver to be used. Unlike many other lower priced Finders on the market, this Finder can actually receive VAST transponders. Many other mid to low cost Finders just receive the signal from the MPEG2 format and this could end anytime rendering your Finder useless. Special Note: All VAST services are MPEG4, there are no VAST MPEG2 services.
Digitech Wireless UHF Clip Lapel Microphone Receiver & Speaker System
259.9 AUD
A wireless portable PA system suitable for busking, street performances, presentations and other events where you are speaking to an audience. The main belt pack is lightweight and clips onto your waist which is connected to a wired lapel microphone. This system comprises of a 10W amplifier with speaker, power switch with volume, and a built-in rechargeable battery for up to 10 hours of talk time. Other features include a 3.5mm socket to connect the included lapel microphone directly in to speaker, and an integrated MP3 player with play control buttons to play music from a microSD card or USB flash drive. It features 7 selectable UHF frequencies, volume controls and rechargeable by USB. Features: - USB and microSD Card Playback - 32GB Maximum Memory Size Box Contents: 1 x Wireless UHF Belt Pack Transmitter 1 x Wireless UHF Speaker 1 x Lapel Microphone with lead and a 3.5mm Plug 1 x 2-Way Micro & Mini B USB Charging Cable 1 x USB Mains Power
Digitech Compact Portable 240V LED Alarm Clock with AM/FM Radio
63.9 AUD
This compact alarm clock will wake you up on time every day to the sound of your favourite AM/FM radio station and features dual alarm functionality with snooze function. An AM/FM radio is built in, with digital tuning and an integrated antenna. Optional 2 x AAA (not included) battery backup for time and alarm settings in case of blackouts during the night. Mains powered with a 1.3m lead. Features: . 0.9 Inch Amber Display . Dual Alarm . AM/FM Radio . Time & Alarm Battery Back-Up . Dual Display Brightness . Snooze Function . Mains Powered
Brabantia Digital Air Fryer 5L
227.9 AUD
Don't let a lack of time prevent you from making a delicious meal at home with the Brabantia Digital Air Fryer! Designed with a generous 5L capacity frying basket, this handy air fryer features easy to use touch control panels with a convenient non-stick basket and basket pad to make cleaning up a super easy task. Complete with a built-in overheating censor to prevent burns and overcooked food, this handy air fryer will have you cooking and enjoying delicious meals in no time!
Jaycar Solar Panel Tin Roof Hook
20.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Mounting Back Leg - 30-60 Degrees
89.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Rail Clamp 35mm - End
19.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Rail Clamp 35mm - Mid
19.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
LatestBuy Slimline Indoor/Outdoor UHF/VHF Antenna w/ PSU
125.9 AUD
This slim indoor/outdoor antenna is very easy to install and is supplied with mounting hardware for wall, mast or rail mount. An in-built amplifier with 4G/LTE filter provides optimal UHF and VHF signal reception for DVB-T, DVB-T2 and DAB radio. The antenna is weatherproof IPX4 and can be mounted horizontally or vertically for best positioning. Reception distance of up to 25km from the TV tower when mounted indoor and up 50km away when mounted outdoor. Features: 11/19dB Gain 4G/LTE Filter In-Built Amplifier Weatherproof Mast/Rail & Wall Mount Up to 25km Indoor Range (up to 50km Outdoor) Included: 1 x Indoor/Outdoor UHF/VHF Antenna 1 x 4m F to F Antenna Cable 1 x 4m F to PAL Antenna Cable 1 x Flat Window Antenna Cable 1 x F to F Adaptor 1 x Power Injector 1 x Mains Power Adaptor 1 x Mast/Rail Clamp 1 x Mast/Rail & Wall Mounting Hardw
Jaycar Solar Panel Tile Roof Hook
41.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
LatestBuy Twin Mount Converter (12/24V-2xUSB 5V 3.1A Panel)
55.9 AUD
This two port USB panel mount charger is designed for charging your electronic devices. It has a black housing with a rubber weather-flap cover to protect the USB sockets. Ideal for quickly charging a GPS, iPhone(R), iPod(R), PSP, mobile phones, camera and other digital devices. Designed in the same housing as our range of laser etched auto rocker switches, enabling you to mount them side by side to give a great look to the switch panel in your 4WD, RV, or Caravan etc. Features: Dual USB output 5V, 3.1( Shared between two ports) Fused Easy to install Input: 12VDC - 24VDC Output: 5VDC
Brass Monkey Single Door Caravan Fridge with Freezer Zone 85L
1807.9 AUD
This 85 litre fridge/freezer is designed to be compact and adaptable, perfect for caravan or recreational vehicles. Suitable for 12 or 24 volt systems, the unit features a three-stage low-battery cut-out to prevent a flat or damaged vehicle battery. Other features include external digital temperature controls, a reliable LG compressor, and low energy consumption. Thanks to the high density foam insulation, the fridge can provide temperatures down to -20DegC. The door is finished in durable steel with a locking latch to secure the door during travel. The unit is supplied with a hard wired power lead that plugs into a supplied Merits socket which can be wired directly into the vehicle's 12 or 24 volt electrical system.
LatestBuy Indoor TV Amplifier Splitter Analog/ Digital Signal Booster
277.9 AUD
This unit is an analog and digital television splitter/amplifier for use in multiple receiver applications. The amplifier has F type input/output connectors and features variable gain on the VHF band. The unit operates from 240VAC and is mounted in a white ABS housing with integral mounting lugs. Size 60(W) x 40(H) x 85(L)mm. Adaptors are included to suit 75 ohm coax connectors.
LatestBuy Bracket LCD Monitor Wall Mount (50-100In)
171.9 AUD
Designed to mount flat panel screens from 50 to 100"; and weighing up to 100kg onto a wall. The sturdy steel frame has a universal VESA hole pattern to suit most screens and a 28mmm low profile design. Solid steel construction with a low profile design. Supplied with all mounting hardware and mini spirit level.
LatestBuy Yagi 6 Element VHF Digital TV Antenna
223.9 AUD
With the major cities in Australia now receiving their Digital TV reception on Band 3, the Kingray range of yagi antennas provide the perfect solution for metropolitan and some country areas. The antennas are almost completely assembled out of the box, with only the reflector and director having to be attached to the boom. The heavy duty 12mm elements, stainless steel screws on the driven element connection points, powder coated boom and UV stabilised plastics will ensure many years of trouble free reception. They are also suitable for DAB+ reception. Specifications: Element: 6 Band: 3 Channels: 6-12 Frequency: 174-230MHz Gain: 10.5dB F/B Ratio: 16dB Overall Length: 1275mm Maximum Width: 835mm
LatestBuy GME 5W UHF In-Dash Starter Pack TX3100VP
607.9 AUD
Begin your UHF CB experience with everything you need from the get-go. The super compact size and power, combined with its ease of use, makes it a perfect UHF CB radio for all types of users. Coupled with a high performance antenna and mounting bracket, this Starter Kit is all you'll need in the one box!
Concord Digital or Network Video Recorder with USB Wi-Fi Dongle
89.9 AUD
Connect the DVR/NVR to the internet router using the Concord USB Wi-Fi Antenna to avoid having to run cable in awkward locations, saving you time and money. It also enables you to place your DVR/NVR discretely inside your house or small workplace. Suitable with both Concord and Swann DVR/NVR's.
Hobby Master RAAF Commemorative Design Magpie 2021 Aircraft Model
185.9 AUD
1/72 F/A18A Hornet 75 Sqn. Commemorative Design Magpie 2021 A2118 Raaf Base Tindal 2021 Pre-Built Aircraft has diecast metal construction with some plastic components. Realistic panel lines, antennas, access panels, and surface details. Pad-printed markings and placards that won't fade or peel like decals. Opening canopies, revealing detailed cockpit interiors. Interchangeable extended/retracted landing gear. Authentic detachable ordnance loads complete with placards. Accurately detailed underside with concealed screwheads.