Dealer---Renogy Solar Panel Flat Roof Tilt Mount
48.74 AUD
Browse the detailed sheet with complete information, compare prices and identify the features of Dealer---Renogy Solar Panel Flat Roof Tilt Mount, offered at the cost of 48.74 AUD; it belongs to the Solar Power category; the seller is Dealer---Renogy Solar Panel Flat Roof Tilt Mount and the manufacturer is Renogy.
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Shipping Cost: 13 AUD
Availability: in stock
Condition: new
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Shipping Cost: 13 AUD
Availability: in stock
Condition: new
Compare Similar Products
Dealer---Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
47.92 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Flat Roof Tilt Mount
49.99 AUD
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please submit a case ! Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
49.99 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case ! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Jaycar Solar Panel Tile Roof Hook
41.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Tin Roof Hook
20.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (647)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (649)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (648)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Dealer---Single Side 27.4in Pole Mount Support For Solar Panel
95.24 AUD
Description The Renogy Solar Panel Pole Mount is designed for off-grid applications when mounting to a roof is not ideal. It comes complete with all fasteners to secure itself to the installation surface. The mount makes the installation of small solar systems easy, affordable and quick. Recommended Tools (Not Provided): Socket Wrench Torque extension Box-Leveler Tape measure 18mm wrench or socket for larger hex nut 13mm wrench or socket for smaller hex nut Caution: Do not attach solar panel to pole mount until mount is securely fit, and pole base has been secured. The chance to strip nuts and bolts exists. Multiple people for installation is suggested. Please Note: The mount is only compatible with Renogy 80W and 100W solar panels. The pole not included. A pole with a diameter of 4 inch is necessary to work with the mount. If you have any questions regarding this product, please submit a case! Key Features 5052-H32 aluminum construction Stainless steel fasteners High-tensile strength Corrosion Free Withstands 50 psf (140 mph) wind loads Attractive brushed aluminum finish Infinitely adjustable between 15-65 degrees Precision hole positioning and alignment Easy, rapid assembly Well-illustrated instructions Package Includes Renogy Single Side 27.4in Pole Mount Support For Solar Panel 1 x Renogy Single Side of Pole Mount Support, 27.4In Width Support Two T-Slotted Brackets Two L-Channels Four L-Brackets Two Support Arms Two U-Bolts Eight T-Bolts Ten Cap Head Bolts and Eighteen Spring Washers Eighteen Washers (Small) Four End Clamps Eight Nuts (Small) Four Washers (Large) Eight Nuts (Large) Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer- Renogy CIGS 150W 12V Flexible and Lightweight Thin-film Solar Panel
365.49 AUD
- Unbreakability, unmatched durability against hurricanes and hailstorms. - Perform Better in Low-light. Delivering exceptional energy yield in partial shading. - 360° flexibility. Seamless integration with diverse roof shapes and types. - Effortless adhesive mounting eliminates wear and tear. - Minimizing roof stress for enhanced stability. Renogy Ultra-Flex 150W CIGS Solar Panel Unmatched durability meets exceptional anti-shading ability. Twice the Output in Partial Shading Bypass diodes integrated across all solar cells, ensuring stable current even in shaded conditions. 4 Times Lighter than Rigid Solar Panels CIGS panels are significantly lighter than conventional rigid solar panels,which means they impose less pressure on the RV roof, enhance driving stability, and reduce strain during travel. 23 Times Thinner than Rigid Solar Panels This remarkable reduction in thickness offers greater flexibility in installation options and a sleeker, more integrated appearance, providing a streamlined and aesthetically pleasing addition to your setup. Instant Use Roof Intact Minimize Roof Stress Optimal Instant Charging Hang your solar panel wherever you prefer for convenient, on-the-go charging while maximizing sunlight absorption. Preserve Your Roof Integrity By eliminating the need for drilling holes in the roof, you can preserve the structural integrity and maintain a sleek and aesthetically clean look for your RV. Minimize Roof Stress Ultra lightweight design reduces pressure on the RV roof and enhancing stability during travel. Effortless Installation Step 1 Clean and dry the installation area. Step 2 Peel off the adhesive tape and attach the solar panel. Step 3 Allow it to sit undisturbed for 24 hours. Cruise with Confidence 4 strips of tape ensure superior adhesion, making the solar panel a reliable and stylish addition to your yacht. Learn more Package Includes NOTE: If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance. More questions about your off-grid power system? Learn more from Renogy Learning Center! 150 Watt CIGS Solar Panel 1 x Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. What do I need to complete my off-grid solar power system...
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (485)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (487)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (486)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Single Side 27.4in Pole Mount Support For Solar Panel
95.99 AUD
Description The Renogy Solar Panel Pole Mount is designed for off-grid applications when mounting to a roof is not ideal. It comes complete with all fasteners to secure itself to the installation surface. The mount makes the installation of small solar systems easy, affordable and quick. Recommended Tools (Not Provided): Socket Wrench Torque extension Box-Leveler Tape measure 18mm wrench or socket for larger hex nut 13mm wrench or socket for smaller hex nut Caution: Do not attach solar panel to pole mount until mount is securely fit, and pole base has been secured. The chance to strip nuts and bolts exists. Multiple people for installation is suggested. Please Note: The mount is only compatible with Renogy 80W and 100W solar panels. The pole not included. A pole with a diameter of 4 inch is necessary to work with the mount. If you have any questions regarding this product, please submit a case ! Key Features 5052-H32 aluminum construction Stainless steel fasteners High-tensile strength Corrosion Free Withstands 50 psf (140 mph) wind loads Attractive brushed aluminum finish Infinitely adjustable between 15-65 degrees Precision hole positioning and alignment Easy, rapid assembly Well-illustrated instructions Package Includes Renogy Single Side 27.4in Pole Mount Support For Solar Panel 1 x Renogy Single Side of Pole Mount Support, 27.4In Width Support Two T-Slotted Brackets Two L-Channels Four L-Brackets Two Support Arms Two U-Bolts Eight T-Bolts Ten Cap Head Bolts and Eighteen Spring Washers Eighteen Washers (Small) Four End Clamps Eight Nuts (Small) Four Washers (Large) Eight Nuts (Large) Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket
19.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy CIGS 150W 12V Flexible and Lightweight Thin-film Solar Panel
847.99 AUD
- Unbreakability, unmatched durability against hurricanes and hailstorms. - Perform Better in Low-light. Delivering exceptional energy yield in partial shading. - 360° flexibility. Seamless integration with diverse roof shapes and types. - Effortless adhesive mounting eliminates wear and tear. - Minimizing roof stress for enhanced stability. Renogy Ultra-Flex 150W CIGS Solar Panel Unmatched durability meets exceptional anti-shading ability. Twice the Output in Partial Shading Bypass diodes integrated across all solar cells, ensuring stable current even in shaded conditions. 4 Times Lighter than Rigid Solar Panels CIGS panels are significantly lighter than conventional rigid solar panels,which means they impose less pressure on the RV roof, enhance driving stability, and reduce strain during travel. 23 Times Thinner than Rigid Solar Panels This remarkable reduction in thickness offers greater flexibility in installation options and a sleeker, more integrated appearance, providing a streamlined and aesthetically pleasing addition to your setup. Instant Use Roof Intact Minimize Roof Stress Optimal Instant Charging Hang your solar panel wherever you prefer for convenient, on-the-go charging while maximizing sunlight absorption. Preserve Your Roof Integrity By eliminating the need for drilling holes in the roof, you can preserve the structural integrity and maintain a sleek and aesthetically clean look for your RV. Minimize Roof Stress Ultra lightweight design reduces pressure on the RV roof and enhancing stability during travel. Effortless Installation Step 1 Clean and dry the installation area. Step 2 Peel off the adhesive tape and attach the solar panel. Step 3 Allow it to sit undisturbed for 24 hours. Cruise with Confidence 4 strips of tape ensure superior adhesion, making the solar panel a reliable and stylish addition to your yacht. Learn more Package Includes NOTE: If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance. More questions about your off-grid power system? Learn more from Renogy Learning Center! 150 Watt CIGS Solar Panel 1 x Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. What do I need to complete my off-grid solar power system...
TechBrands ABS Solar Panel Corner Mounting Brackets White (4pk)
109.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Corner Mounts set of 4, HS-8860 A set of four corner mounts, to attach each corner of your solar panel to your desired mounting surface. These can be used on their own for solar panels 40W or smaller.
Jaycar Solar Panel Mounting Back Leg - 30-60 Degrees
89.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Rail Clamp 35mm - End
19.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Renogy 15000mAh Solar Power Bank Dual USB Phone Charger
45.99 AUD
Description Crafted with high-efficient solar panels and water-resistant plastic, 15000mAh solar panel charger includes two USB ports to keep your phone and other essential electronics full of juice when you are off the grid. The hook at the top and the included carabiner allows you to attach this lightweight battery charger to backpacks while trekking through the jungles. Plus, a flashlight is designed to back you up at night or in emergency. If you have any questions regarding this product, please submit a case ! Key Features 【Solar/DC Recharging】Easily recharge the battery pack via its 2.4A Micro USB input port before hitting the road or in strong, direct sunlight for emergency use. With four battery indicators and a solar charging indicator, you can keep track of charging status at a simple glance. 【Built-in LED Light】Featuring 3 lighting modes (Flashlight, Strobe, and SOS), the power bank can deliver versatile and lasting illumination up to 60-70 hours in any low light conditions. 【A Compact Choice of 16000mAh】More compact than most 15000mAh solar power banks on the market, the solar charger can deliver enormous power with a maximum output up to 5V / 3.4A via dual USB ports. 【Born for Adventures】Encased in a IP66 splash-proof, dust-proof, and shockproof plastic frame, this portable solar charger power up your devices in time, whether you are trekking up hills or through dense forests. Plus, an included carabiner allows for effortless attachment to backpacks, tents, or branches. 【Package Includes】1 x 15000mAh Solar Battery Pack, 1 x 24 in / 60 cm Micro-USB Cable, 1 x User Manual, 12-month warranty, and professional customer service. Package Includes Renogy 15000mAh Solar Power Bank 1 x Renogy 15000mAh Solar Power Bank Capacity: 15000mAh / 55.5Wh Battery: lithium polymer Input of Solar Panel: DC 5V / 300mA Max Input of Micro-USB: DC 5V / 2.4A Max Output of USB-A: DC 5V / 3.4A Total (2.4A per port) Flashlight of Power: 1W LED(3 Light Modes: Bright, Stoobe, and SOS) Flashlight Battery Life: 60-70 hours Size: 7.0 x 3.86 x 0.94 in / 17.8 x 9.8 x 2.4 cm Net weight: 14.6 oz / 414 g Warranty Information Accessories 1-year material warranty Certification
TechBrands ABS Solar Panel Mounting Brackets Pair (White) - Spoiler
131.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Spoiler Mounts 510mm, HS-8864 Specifically designed to deflect wind on solar panel edges that face into high winds, such as the leading edge of solar panels mounted on caravan or RV rooftops. Well matched to 80W and 90
Jaycar Solar Panel Rail Clamp 35mm - Mid
19.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Ecotech Rail - 4200mm
143.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Ecotech Rail - 3405mm
117.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually, required to clamp the end solar panels outer edges to the rails Mid Clamp, 35mm, HS-8805 Sold individually, required to clamp down the edges of two adjacent solar panels Tile Roof Hook, HS-8806 Sold individually, attaches the rail to the building frame underneath a tiled roof Tin Roof Hook,
TechBrands Universal Individual Solar Panel Mounting Bracket
28.9 AUD
Designed for mounting solar panels individually to a fixed surface, such as the roof of a caravan, motor home, shed, or any number of other applications. Not only do these brackets provide secure and easy mounting, but they also space the panel up to provide necessary airflow. Each bracket includes a stainless steel M6 bolt and nut to attach it to the factory holes in the aluminium frame of your solar panel, meaning that no drilling or modification is required. Sold individually, so you just have to purchase the quantity that suits your panel and application. Made from 6061 aluminium alloy Recommended quantity for panels up to 40W: 4 Recommended quantity for panels 40W-200W: 6 Spacing from mounting surface: 22mm Dimensions: 80(L) x 68(W) x 35(H)mm
TechBrands ABS Solar Panel Mounting Brackets Pair (White) - Side
71.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application. ABS Solar Panel Side Mounts, 180mm, HS-8862 This pair of side mounts are intended to be attached to the long edge of taller solar panels, such as 80W and above, adding extra mounting strength and giving more wind deflection.
Powertech Plastic Solar Cable Entry Point Mount (White)
48.9 AUD
Attaching solar panels to the roof of your caravan or the deck of your boat may sound like a relatively straight forward procedure - if you are happy to drill holes. If you've just sunk tens of thousands of dollars into your caravan or boat, that's probably the last thing you want to do, which is why we have introduced this range of ABS solar panel mounts. Quite simply, you stick these heavy duty ABS plastic mounts onto your caravan or boat using Sikaflex(R), and then screw your panel onto the mount. The solar panel is kept with adequate space underneath for cooling, and the curved design ensures adequate wind deflection for high winds. There are 4 different products, which can be used in any combination to suit your specific application.
Jaycar Solar Panel Mounting Back Leg - 15-30 Degrees
71.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Adjacent Front Leg Tilt
36.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar Solar Panel Rail 3PV (2560mm)
81.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. This model rail is 2560mm long and suits 3 x 800-810mm width panels in portrait mode. We carry other models to suit various panel configurations as listed.
Jaycar Solar Panel Mounting Rail Splice
27.9 AUD
A universal and code compliant mounting system for attaching solar panels to the roof of your property. Designed to be used with either tiled or tin roofs, with any slope from 0-60Deg (either flat or pitched), and fully cyclone rated even for wind region D. The easy insertion modules mean that you don't have to slide each attachment along the rail to get it in place, they slot in quite easily at the very spot you want to attach them. For use with 35mm thick modules, a full range of components are available. Rails: Sold individually, 2 rails required for each row of solar panels • 2560mm Rail, for 3x 800-825mm width panels in portrait layout, HS-8800 • 3405mm Rail, for 4x 800-825mm width panels in portrait layout, HS-8801 • 4200mm Rail, for 5x 800-810mm width panels in portrait layout, HS-8802 Rail splice, HS-8803 Sold individually, required to join two lengths of rail in line End Clamps, 35mm, HS-8804 Sold individually,
Jaycar PV Solar Panel Plug and Socket to Anderson Plug (300mm)
69.9 AUD
Anderson connectors one end (50A), PV connectors on the other end.