Jaycar Raspberry Pi RTC Clock Module
48.9 AUD
Access the complete information sheet, compare prices and discover features for Jaycar Raspberry Pi RTC Clock Module, available at the price of 48.9 AUD; it fits into the Motherboards category; the sale is managed by Jaycar Raspberry Pi RTC Clock Module and the production is handled by Jaycar.
The XC9044 is a tiny RTC module which uses I2C to communicate with the Raspberry Pi. Once set up, it can be used to provide a battery backed clock source, and is ideal for situations where the Pi may be powered off and on or out of range of Wi-Fi where it cannot get a reliable time fix. WARNING: KEEP OUT OF REACH OF CHILDREN. Button Cell Batteries are Hazardous (new or used). Keep batteries away from children. These Batteries can cause severe or fatal injuries within 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought if it is suspected a battery has been consumed or inserted; Call the 24-hour Poisons Information Centre in Australia on 131126 or New Zealand on 0800 764 766 or contact your country's emergency department. Five Pin header that plugs straight onto the Pi's GPIO pins I2C interface Based on highly accurate DS3231 IC Backup Battery : CR927
EAN: 9319236735480
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
The XC9044 is a tiny RTC module which uses I2C to communicate with the Raspberry Pi. Once set up, it can be used to provide a battery backed clock source, and is ideal for situations where the Pi may be powered off and on or out of range of Wi-Fi where it cannot get a reliable time fix. WARNING: KEEP OUT OF REACH OF CHILDREN. Button Cell Batteries are Hazardous (new or used). Keep batteries away from children. These Batteries can cause severe or fatal injuries within 2 hours or less if swallowed or placed inside any part of the body. Medical attention should be sought if it is suspected a battery has been consumed or inserted; Call the 24-hour Poisons Information Centre in Australia on 131126 or New Zealand on 0800 764 766 or contact your country's emergency department. Five Pin header that plugs straight onto the Pi's GPIO pins I2C interface Based on highly accurate DS3231 IC Backup Battery : CR927
EAN: 9319236735480
Shipping Cost: 9.95 AUD
Availability: in stock
Delivery Time: 5 - 7 Business Days
Condition: new
Compare Similar Products
Jaycar Raspberry Pi GPIO Breakout Lead and Header for Breadboard
34.9 AUD
If you want to delve into the prototyping of hardware for the Raspberry Pi, then the GPIO expansion kit is a necessity. Using a colour coded rainbow ribbon cable, all 40 GPIO pins are broken out to a header which can be plugged straight into a breadboard. The header is clearly labelled with each pin name, making breadboarding of circuits super easy. Raspberry Pi is a trademark of the Raspberry Pi Foundation Length : 35mm Width : 85mm
Jaycar Quartz Clock Movement (56x56x15mm)
48.9 AUD
Fix Your Old Clock If you're tired of looking at that mantle clock reading ten past one, why not fix it! It will take you about 10 minutes with one of our clock modules. Just remove the old mechanism, replace it with an accurate quartz crystal movement. Don't forget to pull the old mechanism apart to see which bits you can re-use for other projects! Self starting one second stepping motor ±15 second/month accuracy Supplied with three sets of hands Shaft length 16mm, diam. 7.5mm Includes sweep second hand
Jaycar Joystick and Buttons USB Interface
60.9 AUD
If you're building your own arcade game, whether it's with a PC or Raspberry Pi, you'll need a joystick. This interface board allows you to easily interface joysticks like our SM1052 and arcade pushbuttons like SP0662, SP0664, SP0665, SP0666 and SP0669 into any device that can connect to a USB joystick. It could be used for arcade games, flight simulators or anything that works with a USB joystick. Up/Down/Left/Right inputs 12 button inputs Detachable USB lead for fitting through small holes Includes 10 pluggable leads that connect directly to spade terminals on SM1052, SP0662, SP0664, SP0665, SP0666 and SP0669 Joystick and buttons not included
TechBrands Heatsink Pin Grid Array with Adheasive Thermal Transfer Tape
22.9 AUD
The Pin Grid Array Heatsink is a quick and easy thermal solution for many applications including the Raspberry Pi. Peel the backing from the pre-mounted thermal transfer tape and press the heatsink straight onto the Pi's main processor. Can also be used for Star LED modules or any other component with a flat contact area. Don't be fooled by the compact size. The pin grid array design provides excellent thermal resistance and heat dissipation. Raspberry Pi is a trademark of the Raspberry Pi Foundation Length : 21mm Width : 21mm Height : 6.2mm Packaged Volume : 0l Packaged Weight : 0kg Packaged Length : 2cm Packaged Width : 2cm Packaged Height : 0.6cm Heatsink Thermal Resistance : 5.9DegC/W
Duinotech Touchscreen Display with HDMI and USB - 5"
302.9 AUD
This 5 inch LCD screen has a resolution of 800x480. It can connect directly to a Raspberry Pi and can connect to any other HDMI source that outputs the native 800x480 resolution, via the built-in HDMI port. It also includes a resistive touch interface via the GPIO header. This module is designed to connect directly to the top of a Raspberry Pi, with a small HDMI double plug that locks the two together, but it can be used as a standalone display powered via the micro USB socket on the display. A backlight with switch is included. Now you can add a compact second display to your HDMI device, or make your own portable display device. Some display and driver configuration may be needed for operation. Touch interface GPIO only Inputs: HDMI, Resistive Touch Supports: Raspbian for touch, video via HDMI
Duinotech Touchscreen Display with HDMI and USB - 7"
302.9 AUD
This 7 inch LCD screen has a resolution of 1024x600. It can connect directly to a Raspberry Pi as well as to any other HDMI source that supports the native 1024 x 600 resolution, via the built-in HDMI port. It also includes a capacitive touch interface. This module is designed to connect directly to the top of a Raspberry Pi, with a small HDMI double plug that locks the two together, but it can be used as a standalone display powered via the micro USB socket on the device. A back-light with switch is included. Now you can add a compact second display to your HDMI device, or make your own portable display device. Turn the Pi plus monitor combination into your own portable computer, small enough to install in a car, or even a custom 3D printed case. Some display and driver configuration may be needed for operation. This display works with Microsoft Windows versions up to Windows 10, and supports 5 point touch input (with the exception of Windows XP which has single point touch). Touch interface GPIO only Inputs: HDMI, Resistive Touch Supports: Raspbian for touch, video via HDMI