Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1628)
48.62 AUD
Browse the detailed sheet with complete information, compare prices and identify the features of Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1628), offered at the cost of 48.62 AUD; it belongs to the Solar Power category; the seller is Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1628) and the manufacturer is Renogy.
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Shipping Cost: 0 AUD
Availability: in stock
Condition: new
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Shipping Cost: 0 AUD
Availability: in stock
Condition: new
Compare Similar Products
Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1629)
48.62 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets
48.62 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets (1577)
59.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets (1578)
299.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets
49.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Dealer---Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
47.92 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Renogy 50 inch RV Solar Panel Kit Tilt Mount Brackets
99.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
49.99 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case ! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Duinotech Duinotech Bracket Mount Vesa Case (To Suit Raspberry Pi)
37.9 AUD
Mount your Raspberry Pi 3B+ securely to the back of your monitor or TV. The perspex case is compatible with 100 x 100mm VESA mounts, and fits a 30mm fan (YX2500 sold separately) if cooling is required. Mounting screws included.
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (649)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (648)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (647)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket
19.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (485)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (486)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4 (487)
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Solar Panel Mounting Z Bracket -- Set of 4
11.99 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case ! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Renogy Mounting Brackets for 12V 100Ah Pro LiFePO4 Batteries (Set of 4)
18.99 AUD
-Ensure batteries stay tight against the surface to resist vibration. -Simple to mount your battery for a minimalist look. -Made for 12V 100Ah Pro LiFePO4 Battery only. Made exclusively for Renogy 12V 100Ah Pro LiFePO4 Batteries, this mounting bracket pack is a great addition to your batteries, ensuring that your batteries stay firmly in place, whether you are driving in rugged terrain or navigating through choppy waves. The pack includes everything you need for a simplified installation to save time and effort in sizing/DIY. Package Includes Battery Fix Brackets x 4 ST4 Mounting Screws x 8 M4*10mm Fix Bolts x 8
Renogy Mounting Brackets for 12V 200Ah Pro LiFePO4 Batteries (Set of 4)
16.99 AUD
-Ensure batteries stay tight against the surface to resist vibration. -Simple to mount your battery for a minimalist look. -Made for 12V 200Ah Pro LiFePO4 Battery only. Made exclusively for Renogy 12V 100Ah Pro LiFePO4 Batteries, this mounting bracket pack is a great addition to your batteries, ensuring that your batteries stay firmly in place, whether you are driving in rugged terrain or navigating through choppy waves. The pack includes everything you need for a simplified installation to save time and effort in sizing/DIY. Package Includes Battery Fix Brackets x 4 ST4 Mounting Screws x 8 M4*10mm Fix Bolts x 8
LatestBuy LCD Monitor Wall Mount Fixed Bracket (45kg)
89.9 AUD
This economy TV wall bracket is only 22mm deep so your TV will sit closer to the wall than conventional brackets. The lateral shift allows for the TV to move for perfect placement. A quick-release design allows the TV to lock and unlock instantly from the wall plate. The bracket is designed for easy and fast installation. Mounting hardware is included, along with a bubble level to avoid your TV being mounted out of alignment. Universal & VESA compliance 200x200, 400x200, 400x400, 600x400.
Nite Ize Handleband Universal Smartphone Bar Mount (Black)
57.9 AUD
The HandleBand Universal Smartphone Bar Mount allows you to securely attach most mobile phones to a handlebar, with or without a case, to be easily seen and conveniently accessible to use while riding, walking, or running. Made with a lightweight expandable silicone with an aluminum base at its core, the single band securely wraps around nearly any sized bar - including bicycles, jogging strollers, and shopping carts. It can be positioned wherever you want, attached and removed as often as you need, and is designed to allow full functionality of your smartphone while it's in place. View maps, talk to Siri, use your training apps, or video camera - or even use your phone as a bike light at night - all while keeping your smartphone safe and accessible. The flexible nature of silicone gives the HandleBand the capability to secure and wrap other devices, too (like flashlights or bike pumps) for functionality that fits your lifestyle. Simple, versatile, and with a streamlined desig
LatestBuy Entry Counter (to suit Doorway Beam Sensor)
109.9 AUD
Attach to our LA-5193 Door Beam units to easily measure the door entry count in your shop, factory or office. The 20m lead carries both the signal and power, allowing you to mount the counter in a convenient location away from the door entry. This product is a must have for the serious retailer to easily measure the store traffic to sales conversions in their store. Features: Includes '+','-' and 'Reset' buttons
TechBrands Lift-O-Mats 90-Degree Reverse Stainless Steel Bracket
45.9 AUD
A stainless steel bracket to suit our MHG100 series of Stabilus Lift-O-Mat gas springs.
LatestBuy LCD Monitor Wall Mount Bracket (32-70In 180Deg)
241.9 AUD
Features: Universal flat panel mount Fit for 32-70"" flat panel TVs Max VESA 600x400 Distance to the wall: 43-502mm Cold rolled steel Easy and fast installation Ultra-thin design Lateral shift which allows TV to move for perfect placement Built in spirit level
LatestBuy Bracket LCD Monitor Wall Mount (50-100In)
171.9 AUD
Designed to mount flat panel screens from 50 to 100"; and weighing up to 100kg onto a wall. The sturdy steel frame has a universal VESA hole pattern to suit most screens and a 28mmm low profile design. Solid steel construction with a low profile design. Supplied with all mounting hardware and mini spirit level.
TechBrands Lift-O-Mats 90 Degree Zinc Bracket
29.9 AUD
90Deg zinc bracket to suit our TVI005 series of Stabilus Lift-O-Mat gas springs.
LatestBuy Tent Pole Carrier 2m with End Caps and Brackets
171.9 AUD
A pole carrier consists of a 2m length of 150mm diameter PVC water pipe with mounting brackets and end pieces that are hinged. You mount this carrier to the side or the roof of your caravan or RV.
LatestBuy Ski Tow Rope 500kg (To Suit 1-2 Person Tubes)
50.9 AUD
Suitable for 1 or 2 person tubes, it includes two quick connect loops for ease of attachment. A large loop and float are on the boat-end. It's 17m long and includes a storage case with a huge 500kg breaking strain (not to be used for lifting).
Jaycar Stainless Steel Trunk Groove Bracket (16mm)
32.9 AUD
Polished stainless steel bracket in a Z shape to mount an antenna on the vehicle boot or bonnet.
TechBrands Zinc Flat Bracket
29.9 AUD
Flat zinc bracket to suit our TVI005 series of Stabilus Lift-O-Mat gas springs.
Jaycar RJ45 Side Entry Surface Mount 8P8C
22.9 AUD
Side entry surface mount voice grade US modular socket. Snap-on cover provides access to screw terminals for connection of wires. Double sided tape included for easy installation. Beige colour suits most environments. ACA approved.
Jaycar PC Mount Pluggable Terminal Block Socket 5.08mm - 6 Pole
22.9 AUD
The plug version to suit the above headers - these terminal blocks are easily plugged in, and feature nickel- plated brass cage clamps, tin- plated phosphor- bronze contacts, M3 nickel- plated steel
Digitech Tablet and Phone Headrest Mount/Bracket
45.9 AUD
This universal bracket fits in between the posts of your car's headrest and holds a Smartphone or Tablet to keep your backseat passengers entertained on a road trip. Spring clamps hold your Smartphone or Tablet in position, and a 360° ball joint enables you to get the screen into the best position, including vertical or horizontal orientation. Supports devices between 5 to 10=, and features a soft gel pad backing to help support your device. No tools required, easy press-in installation.
Jaycar PC Mount Pluggable Terminal Block Socket 5.08mm - 8 Pole
27.9 AUD
The plug version to suit the above headers - these terminal blocks are easily plugged in, and feature nickel- plated brass cage clamps, tin- plated phosphor- bronze contacts, M3 nickel- plated steel
Digitech Universal Tablet Suction Cup Mount (7.9"" to 10.9"")
71.9 AUD
This universal tablet holder supports tablets up to 270mm wide and has a strong suction cup mount to stick to most surfaces. The adjustable swivel-mount bracket enables you to position your tablet for the optimum viewing angle.
LatestBuy Monitor Desk Mount Single Bracket (Black)
143.9 AUD
Improve your workspace ergonomics and free up your desk area by suspending your display above your table. The flexible design clamps to the edge of the desk and offers an exceptional range of motion to position the monitor. Fits most 13 to 27 inch flat-screen displays with VESA compliant mount points and a maximum weight of 8kg. Includes all necessary mounting hardware to suit a variety of monitors.
LatestBuy UHF/VHF Passive Indoor TV Rabbit Antenna Desk or Wall Mount
36.9 AUD
The traditional "rabbit"; ears antenna for the modern day. With flat screen TV's, rabbit ear antennas no longer have the ideal spot sitting on top of the set. These rabbit ears can sit flat on a surface or be mounted on to a wall. Suitable for areas with strong television reception. Features: Suits digital TV signals Mounting hardware included Cable length: 1.6m
LatestBuy Monitor Desk Mount Double Bracket (Black)
161.9 AUD
This Dual PC Monitor CW2875 VESA-compliant Desk Clamp frees up valuable space in your workstation and increases workday productivity by enabling the suspension of two flat-screen displays on a single adjustable clamping base. Its unique, flexible design offers an exceptional range of motion and allows monitors to be placed back-to-back for use by more than one person. Other features include display adjustment with tilt, swivel and rotation capabilities and fits most 13- to 27-inch flat-screen displays. Its durable, all-metal frame with scratch-resistant, powder-coat finish withstands the stress of repeated use and blends easily into any décor. It comes with all necessary mounting hardware, and each mount supports weights of up to 8kg.