Dealer---Renogy Solar Panel Flat Roof Tilt Mount
48.74 AUD
Browse the detailed sheet with complete information, compare prices and identify the features of Dealer---Renogy Solar Panel Flat Roof Tilt Mount, offered at the cost of 48.74 AUD; it belongs to the Solar Power category; the seller is Dealer---Renogy Solar Panel Flat Roof Tilt Mount and the manufacturer is Renogy.
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Shipping Cost: 13 AUD
Availability: in stock
Condition: new
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please email supportau@renogy.com. Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Shipping Cost: 13 AUD
Availability: in stock
Condition: new
Compare Similar Products
Renogy Solar Panel Flat Roof Tilt Mount
49.99 AUD
Description Renogy Tilt Mount will support on-grid and off-grid systems. The tilt mount can be used on any flat surface, provided that the correct fastening techniques are applied. The tilt mount is designed to allow adjustment of the panel for optimum performance. However, please note that angle adjustability will decrease as the panel size increases. Recommended Tools (Not Provided): Socket Wrench Torque extension Tape measure 14mm wrench or socket for larger hex nut 4mm hex key (Allen Wrench) Notice: This equipment should be installed, adjusted, and serviced by qualified electrical maintenance personnel familiar with the construction and operation of the equipment and the hazards involved. Failure to observe this precaution may result in bodily injury. Protective gloves and safety glasses should be worn during installation. The chance to strip nuts and bolts exists. Multiple people should be involved in installation. When mounting to a roof or elevated surface, exercise caution when climbing a ladder. When on a roof or elevated surface, always use a strap or harness. If you have any questions regarding this product, please submit a case ! Key Features Can be used on any flat surface. Ideal for positioning solar panels at an angle on a rooftop. Maximum tilt angles depend on the size of the panel. Light weight aluminum alloy material. Ideal for easy transportation and safe mounting. Package Includes Renogy Solar Panel Flat Roof Tilt Mount 1 x Renogy Solar Panel Flat Roof Tilt Mount 5052-H32 aluminum construction Stainless steel fasteners Corrosion Free Precision hole positioning and alignment Easy, rapid assembly Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
47.92 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1629)
48.62 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets (1628)
48.62 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy Dealer-RV Solar Panel Kit Tilt Mount Brackets
48.62 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy Solar Panel Roof Drill-Free Corner Bracket Mount
49.99 AUD
Description The Renogy Corner Bracket Mount is a great drill-free alternative mount for your solar system. These light weight brackets can be used with virtually any aluminum framed solar panels to provide drill-free and secure mounting to flat surfaces. This well constructed mount lifts your solar panel to provide an optimum height that establishes an air gap between the panel and the surface, assuring your panel stays cool in high temperatures. With the Renogy Corner Bracket installation on most motorhomes, caravans, RVS, and boats are cleaner and flexible. If you have any questions regarding this product, please submit a case ! Key Features Non-corrosive, long lasting, and high quality ABS plastic construction. 100% recyclable and UV resistant. Drill-free mounting. Designated for virtually any aluminum framed solar panels. Best suitable for flat roofs of aluminum, wood, or GRP material. Easier and more flexible installation. Compatible with all Renogy solar panels. Package Includes Renogy Corner Bracket Mount 1 x Renogy Corner Bracket Mount Material: UV-resistant ABS Plastic Weight (each component) 7.2 oz. Recommended Adhesive Sikaflex 252 or alike Side Bracket Dimensions (l x w x h) 7.0 x 4.6 x 2.3 in Corner Bracket Dimensions (l x w x h) 5.9 x 5.9 x 2.3 in Warranty Information Accessories 1-year material warranty
Renogy Dealer---Single Side 27.4in Pole Mount Support For Solar Panel
95.24 AUD
Description The Renogy Solar Panel Pole Mount is designed for off-grid applications when mounting to a roof is not ideal. It comes complete with all fasteners to secure itself to the installation surface. The mount makes the installation of small solar systems easy, affordable and quick. Recommended Tools (Not Provided): Socket Wrench Torque extension Box-Leveler Tape measure 18mm wrench or socket for larger hex nut 13mm wrench or socket for smaller hex nut Caution: Do not attach solar panel to pole mount until mount is securely fit, and pole base has been secured. The chance to strip nuts and bolts exists. Multiple people for installation is suggested. Please Note: The mount is only compatible with Renogy 80W and 100W solar panels. The pole not included. A pole with a diameter of 4 inch is necessary to work with the mount. If you have any questions regarding this product, please submit a case! Key Features 5052-H32 aluminum construction Stainless steel fasteners High-tensile strength Corrosion Free Withstands 50 psf (140 mph) wind loads Attractive brushed aluminum finish Infinitely adjustable between 15-65 degrees Precision hole positioning and alignment Easy, rapid assembly Well-illustrated instructions Package Includes Renogy Single Side 27.4in Pole Mount Support For Solar Panel 1 x Renogy Single Side of Pole Mount Support, 27.4In Width Support Two T-Slotted Brackets Two L-Channels Four L-Brackets Two Support Arms Two U-Bolts Eight T-Bolts Ten Cap Head Bolts and Eighteen Spring Washers Eighteen Washers (Small) Four End Clamps Eight Nuts (Small) Four Washers (Large) Eight Nuts (Large) Warranty Information Accessories 1-year material warranty
Renogy 50 inch RV Solar Panel Kit Tilt Mount Brackets
99.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets (1577)
59.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets (1578)
299.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Renogy RV Solar Panel Kit Tilt Mount Brackets
49.99 AUD
- 0°-90° adjustment for optimal sun exposure - 50in bracket for horizontal and vertical solar panel setup - Compatible with Renogy solar panels up to 550W - Great addition for use on various flat surfaces - Quick and easy installation The 28-inch TMB bracket can be adapted to Renogy solar panels up to 100W, and the 50-inch TMB bracket can be adapted to Renogy solar panels up to 550W or two 100W Renogy solar panels. Package Includes 4 x Fixed L-Brackets 2 x Tilt L-Brackets 6 x M8 Plastic Knob Screws 6 x M8 Wing Nuts 4 x M6 x 16mm Hex Cap Bolts 4 x M6 Split Lock Washers 8 x M6 Flat Washers 4 x M6 Hexagonal Nuts 6 x M8 Washers 6 x M8 Spring Washers 10 x 1¼ in Self-Drilling Cap Screws 6 x Plastic Retaining Rings Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. Are the brackets made of stainless steel? the brackets are aluminum and the fasteners are stainless steel. 2. Did others recieve wing nuts and washers? My package had the plastic head bolts but no nuts... All mounting parts were included in mine. 3.do you need to ground the aluminum brackets to the vehicle chassis? I didn't bother. The solar panel frame is plastic, so it isn't grounded to aluminum frame. Instructions on panel didn't suggest to do so. 4. Do these brackets fold up if you undo one end? Don't want to mount. I want to pack and use freestanding for my panel. You can unscrew the short ends that connect the two long pieces that make a V on each side and you could fold it up. This is also how you adjust the angle of the sun to the panels. You know, like summer sun is a different angle than winter sun. 5.Can they be tilted while driving? As long as you don't mind sending the panels onto the traffic behind you.... I suppose if you drilled thru the roof and mounted them with 3/8" bolts and oversized fender washers it could be possible to keep them mounted to the roof. As for keeping the panels attached to the brackets; again, that's a mounting hardware issue.
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (647)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (649)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4 (648)
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer---Renogy Solar Panel Mounting Z Bracket -- Set of 4
18.34 AUD
Description The Renogy Z-Bracket Mount System is designed to support the installation of single solar panel units, generally in off-grid installations. These units are ideal for installation on RV roofs and non-inhabited dwellings such as sheds or garages. It is also suited as attachment to a user made structure such as a wooden frame. The system comes complete with all fasteners to secure the system to the installation surface. This system makes the installation of small solar systems easy, affordable and quick. Please Note: Not recommended for panels over 150 watt. If you do want to use this product for panels over 150 watt, you would need 2 sets of this Z bracket per panel. If you have any questions regarding this product, please submit a case! Key Features Lightweight Aluminum corrosion-free construction. Ease of installation Ideal for mounting small solar panels. Mounts panels to RVs, trailers, boats or yachts. Perfect for irregular surfaces Pre-assembled with bolts and washers Package Includes Renogy Solar Panel Mounting Z Bracket -- Set of 4 1 x Renogy Solar Panel Mounting Z Brackets (Set of 4) Four Z Shape Solar Panel Brackets Four M6-16 Hex Cap Bolt Four M6 Split Lock Washer Eight M6 Flat Washer Four M6 Hexagonal Nut Eight #11 Self-Drilling Cap Screw and Plastic Retaining Ring Warranty Information Accessories 1-year material warranty
Dealer- Renogy CIGS 150W 12V Flexible and Lightweight Thin-film Solar Panel
365.49 AUD
- Unbreakability, unmatched durability against hurricanes and hailstorms. - Perform Better in Low-light. Delivering exceptional energy yield in partial shading. - 360° flexibility. Seamless integration with diverse roof shapes and types. - Effortless adhesive mounting eliminates wear and tear. - Minimizing roof stress for enhanced stability. Renogy Ultra-Flex 150W CIGS Solar Panel Unmatched durability meets exceptional anti-shading ability. Twice the Output in Partial Shading Bypass diodes integrated across all solar cells, ensuring stable current even in shaded conditions. 4 Times Lighter than Rigid Solar Panels CIGS panels are significantly lighter than conventional rigid solar panels,which means they impose less pressure on the RV roof, enhance driving stability, and reduce strain during travel. 23 Times Thinner than Rigid Solar Panels This remarkable reduction in thickness offers greater flexibility in installation options and a sleeker, more integrated appearance, providing a streamlined and aesthetically pleasing addition to your setup. Instant Use Roof Intact Minimize Roof Stress Optimal Instant Charging Hang your solar panel wherever you prefer for convenient, on-the-go charging while maximizing sunlight absorption. Preserve Your Roof Integrity By eliminating the need for drilling holes in the roof, you can preserve the structural integrity and maintain a sleek and aesthetically clean look for your RV. Minimize Roof Stress Ultra lightweight design reduces pressure on the RV roof and enhancing stability during travel. Effortless Installation Step 1 Clean and dry the installation area. Step 2 Peel off the adhesive tape and attach the solar panel. Step 3 Allow it to sit undisturbed for 24 hours. Cruise with Confidence 4 strips of tape ensure superior adhesion, making the solar panel a reliable and stylish addition to your yacht. Learn more Package Includes NOTE: If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance. More questions about your off-grid power system? Learn more from Renogy Learning Center! 150 Watt CIGS Solar Panel 1 x Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years 1. What do I need to complete my off-grid solar power system...
Dealer---Renogy Solar Panel MC4 Assembly Tool
15.05 AUD
Description The MC4 Assembly Tool is a hard plastic material that is very handy for both the assembly of custom MC4 wires, making it easier for new and veteran users to quickly and easily tighten and take apart the connectors. Please Note: The Renogy MC4 Assembly Tool is not compatible with the MC4 Connections found in any of Renogy's Solar Suitcase Products. If you have any questions regarding this product, please submit a case! Key Features Hard plastic Double - quick screw down. Package Includes Renogy MC4 Assembly Tool 1 x Renogy Solar Panel MC4 Assembly Tool Dimensions: 5.5 x 2 x 1 inches Weight: 0.3 ounces Material: Hard Plastic Warranty Information Accessories 1-year material warranty
Renogy Dealer---Solar Adaptor Kit Cables Connecting Solar Panel to Controller (447)
76.62 AUD
Description The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes MC4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer's unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller. If you have any questions regarding this product, please submit a case! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Renogy Solar Adaptor Kit 1 x Renogy 10ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 30ft 10AWG Adaptor Kit - Connecting Solar Panels to...
Renogy Dealer-Solar Adaptor Kit Cables 12AWG Connecting Solar Panel to Controller
19.99 AUD
Description Renogy Adapter Kit is a set of two wires made for connecting your Renogy panel to your charge controller. Specialized with solar connectors on one end for effortless connection to your panel and exposed wire on the other end to lead directly into your charge controller, this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as two gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. If you have any questions regarding this product, please submit a case ! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Solar Adaptor Kit 1 x 9in 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 9in AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Conductor: Tinned copper wire Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Warranty Information Accessories 1-year material warranty
Renogy Dealer-Solar Adaptor Kit Cables 12AWG Connecting Solar Panel to Controller (769)
19.99 AUD
Description Renogy Adapter Kit is a set of two wires made for connecting your Renogy panel to your charge controller. Specialized with solar connectors on one end for effortless connection to your panel and exposed wire on the other end to lead directly into your charge controller, this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as two gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. If you have any questions regarding this product, please submit a case ! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Solar Adaptor Kit 1 x 9in 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 9in AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Conductor: Tinned copper wire Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Warranty Information Accessories 1-year material warranty
Renogy Dealer---Solar Adaptor Kit Cables Connecting Solar Panel to Controller (446)
76.62 AUD
Description The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes MC4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer's unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller. If you have any questions regarding this product, please submit a case! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Renogy Solar Adaptor Kit 1 x Renogy 10ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 30ft 10AWG Adaptor Kit - Connecting Solar Panels to...
Renogy Dealer---Solar Adaptor Kit Cables Connecting Solar Panel to Controller (444)
76.62 AUD
Description The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes MC4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer's unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller. If you have any questions regarding this product, please submit a case! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Renogy Solar Adaptor Kit 1 x Renogy 10ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 30ft 10AWG Adaptor Kit - Connecting Solar Panels to...
Renogy Dealer---Solar Adaptor Kit Cables Connecting Solar Panel to Controller
76.62 AUD
Description The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes MC4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer's unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller. If you have any questions regarding this product, please submit a case! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Renogy Solar Adaptor Kit 1 x Renogy 10ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 30ft 10AWG Adaptor Kit - Connecting Solar Panels to...
Renogy Dealer - E.FLEX 220 Portable Solar Panel
351.99 AUD
Description See your next adventure unfold with Renogy E.FLEX 220W portable solar panels. Ergonomic handles make these foldable panels easy to take with you when you’re on the go! They’re powered with PERC monocrystalline solar cells that boost conversion efficiency to 22%. E.FLEX 220W solar panels are super durable and scratch resistant with ETFE film and rugged corner guards – they last 3 times longer than panels made with PET. With IP67 waterproof rating and rugged corner guards, E.FLEX solar panel can deliver plenty of reliable power in the most demanding weather conditions. They’ll charge your portable power stations and batteries wherever your journey takes you. Solar connectors and charge controllers may be required. Sold separately. If you have any questions regarding this product, please submit a case ! Key Features Efficiency Meets Durability PERC monocrystalline solar cells deliver a 22% efficiency rating, generating more power in a smaller frame than polycrystalline panels. The ETFE film coating further boosts the power output with up to 95% light transparency and reduces the risks of microcraks & deterioration, giving E.FLEX 220W solar panels a lifespan of over 10 years compared with PET-coated solar panels. Adjustable Support Legs Capture more sunlight with adjustable support legs that provide a wide range of tilt angles. Adjustable tilt means you get up to 30 percent more power generation than panels lying flat on the ground. With E.Flex you can charge deep-cycle batteries and portable power stations with confidence. Made for the Outdoors Robust corner guards and ETFE film protect E.FLEX 220W Portable Solar Panels (IP67-rated) against splashes, dirt, and scratching that can impact power generation. Easy-to-grip handles and a pack-and-go storage case mean you're ready whenever adventure calls. Compatible with Generators & Batteries Plug-and-play solar connectors make E.FLEX 220W portable solar panels the perfect addition to portable solar generators PHOENIX 500 and PHOENIX 1000. It can also be connected to solar charge controllers to charge deep-cycle batteries.(The solar connectors and charge controllers are sold separately.) Package Includes E.FLEX 120 portable solar panel 1 x Specifications Max Power at STC: 220W Open Circuit Voltage (Voc): 26.8V Short Circuit Current (Isc): 10.2A Opitmum Operating Voltage (Vmp): 22.7V Optimum Operating Current (Imp): 9.1A Operating Temperature: '-4°F to 149°F / -20°C to 65°C Dimensions:29.1 x 22.9 x 1.6in / 738 x 581 x 40mm (folded) 29.1 x 84.1 x 0.2in / 738 x 2135 x 4mm (unfolded) Weight:20.4lb / 9.23kg Panel Leads (Pair):2.5mm2 / 39.37in Warranty Information Panels Material and workmanship warranty: 1 year Certification
Renogy Dealer-Solar Adaptor Kit Cables 12AWG Connecting Solar Panel to Controller (770)
19.99 AUD
Description Renogy Adapter Kit is a set of two wires made for connecting your Renogy panel to your charge controller. Specialized with solar connectors on one end for effortless connection to your panel and exposed wire on the other end to lead directly into your charge controller, this wire makes system set up as easy as can be! Renogy offers a range of different lengths, as well as two gauge sizes to choose from. The different sizes allow you to customize to your systems based on your needs. If you have any questions regarding this product, please submit a case ! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Solar Adaptor Kit 1 x 9in 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 9in AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Conductor: Tinned copper wire Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Warranty Information Accessories 1-year material warranty
Renogy Dealer---Solar Adaptor Kit Cables Connecting Solar Panel to Controller (445)
76.62 AUD
Description The Renogy Adaptor Kit is a set of two wires designed specifically for connecting a Renogy solar panel to a charge controller. The Adaptor Kit includes MC4 connectors on one end for effortless connection to the solar panel, and exposed wire on the other end to lead directly into the charge controller. This wiring kit is essential for off-grid solar installations, roof or ground level, and is offered in a wide range of sizes. The wiring is weatherproof and designed to withstand extreme heat and cold. This wiring kit is ideal for Renogy Off-Grid Kits ranging from 100W to 400W. Renogy offers a wide range of lengths, as well as two different gauge sizes to choose from. The different sizes allow for customization based on a customer's unique needs. The Renogy 10ft 10AWG Adaptor Kit allows for 10 feet of length between the solar panel and charge controller. If you have any questions regarding this product, please submit a case! Key Features Hard plastic connectors at each end. Female and male connectors for an unbreakable connection. Weatherproof, insullated wiring. Exposed ends for connection to the solar charge controller. Essential for off-grid solar power system setup. Black sunlight resistant cable. Extends and locks built-in cables. Package Includes Renogy Solar Adaptor Kit 1 x Renogy 10ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 10ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 10ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 20ft 10AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 10 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 6.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.85 Min. Wall Thickness of Sheath (mm): 1.08 Number of Wires in Conductor: 84 IP 65 Protection Renogy 20ft 12AWG Adaptor Kit - Connecting Solar Panels to Charge Controllers (A Pair) Length: 20ft AWG: 12 Rating Voltage: 600/1000V Temperature: -40°F to +185°F Normal Cross Sectional Area of the Conductor (mm2): 4.0 Diameter of Wires in Conductor (mm): 3.02±0.08 Min. Wall Thickness of Insulation (mm): 0.78 Min. Wall Thickness of Sheath (mm): 0.97 Number of Wires in Conductor: 56 IP 65 Protection Renogy 30ft 10AWG Adaptor Kit - Connecting Solar Panels to...
Dealer-Renogy 200W Portable Solar Panel
271.99 AUD
- 23.5% High power conversion efficiency, Grade A solar battery cells and ETFE - Super lightweight to carry outside，portable and easy to install. - Design for outdoor activity with 4 mounting holes, easy to tie - Multiple output ports for different occasions E.FLEX-CORE 200W Portable Solar Panel The Renogy E.Flex Series is ready to generate electrical power wherever sun rays land, offering a versatile charging solution for portable power stations or off-grid DC batteries. The 100W EFlex solar panel can provide up to 500Wh per day at average sun intensity levels when you are out for short trips, camping, or fishing. Lightweight 4 Mounting Holes Kickstands Power Up Your Efficiency Power Multiple Appliances Design Best Solar Solution Can Equipped with Renogy Power Station Package Includes 1 x 200w EFLEX portable solar panel 1 x user manual 1 x Ewarranty card Option：1 x Power Station 500 Option：1 x Power Station 1000 RENOGY 200w EFLEX portable solar panel Max Power at STC 200 W Open Circuit Voltage 23.40V Short Circuit Current 10.50A Optimum Operating Voltage 20.16V Optimum Operating Current 9.92A Cell Efficiency >22.6% Operating Temperature ’14°F to 149°F(-10℃ to +65℃) Dimensions 25.0 x 21.1 x 2.2 in / 635 x 536 x 55 mm(fold),94.1 x 21.1 x 0.2 in / 2390 x536 x 4 mm (unfold) Weight 17.6 lbs. / 8.0 kg Warranty Material and workmanship warranty 1 Certifications CE and RoHS compliant, FCC, Manufactured in a Certified ISO 9001 Facility, CA65, PES YES 1.What can this panel charge？ The Eflex solar panel can charge most batteries (charge controller needed) and power stations. It is important to ensure that the open circuit voltage of the panel will not exceed the max DC input voltage rating of the powerstation or charge controller. 2.Why is my solar panel under producing? Solar panel performance may be hindered for a number of reasons. Most commonly environmental conditions such as indirect sunlight, temperature rise, cloudy sky, and dirt and stain build up on the top glass will cause a reduced power output. 3.How should I connect solar panels in my electrical circuit (series vs parallel)? Solar panels can be connected in series or in parallel to meet your electrical circuit size and power demand. Connecting solar panels in series will have the effect of adding up their operating voltage output, while system current output will be the same as that for one panel. While, connecting solar panels in parallel will have a different effect; individual panels operating current output will add up to be the system output current, while system output voltage will be the same as the output voltage of one solar panel. Please make sure the open circuit voltage of conected panel will not exceed Max DC input voltage of power station or controller. 4.How many solar panels do I need? The best way to gauge how many solar panels you need, is to understand and define the power load needed from this system. Power is measured in Watt, and capacity is commonly...
Renogy Dealer - E.FLEX 80 Portable Solar Panel
160 AUD
Description The Renogy E.Flex Series is ready to generate electrical power wherever sun rays land, offering a versatile charging solution for portable power stations or off-grid DC batteries. The 80W EFlex solar panel can provide up to 320Wh per day at average sun intensity levels when you are out for short trips, camping, or fishing. If you have any questions regarding this product, please submit a case ! Key Features Highly Efficient Premium solar cells with an energy conversion efficiency of up to 22% guarantee sufficient power output in daylight conditions Superior Durability IP67 level water proof ETFE film provides long-life and ultra protection against environmental stress Portable Frameless lamination and light weight construction. Easy to carry. Kick-Stand Kick-stand ready for angled cell position, allowing more power generation during day hours. Compatibility EFLEX portable solar panel is designed for the most portable generator power station on the market, including Phoneix 200 or similar power stations from other brands. Package Includes E.FLEX 80 portable solar panel 1 x Specifications Max Power at STC: 80W Open Circuit Voltage (Voc): 20.7V Short Circuit Current (Isc): 4.9A Opitmum Operating Voltage (Vmp): 17.2V Optimum Operating Current (Imp): 4.7A Operating Temperature: -40°F to 149°F(-40℃ to +65℃) Dimensions:24.8*17.1*1.0 inch(fold), 24.8*34.2*0.2 inch(unfold) Weight: 7.3 lbs (3.3 kg) Panel Leads (Pair):2.5mm2(39.37in) Warranty Information Panels Material and workmanship warranty:1 year Certification
Renogy Dealer - E.FLEX 120 Portable Solar Panel
231.99 AUD
Description The Renogy E.Flex Series is ready to generate electrical power wherever sun rays land—offering a versatile charging solution for portable power stations or off-grid DC batteries. The 120W EFlex portable solar panel is suitable for the new Phoenix 500/1000 power station and most solar generators on the market with the MC4 connector cable. The portable solar panel adopts PERC solar cell technology with a conversion efficiency of up to 22%. The ETFE-laminated case and IP65 water-resistant rating provide ultra protection and are durable enough to extend the panel's lifespan. It's ideal for a road trip, camping, RV, and over-landing. If you have any questions regarding this product, please submit a case ! Key Features Higher Energy Conversion Rate Premium solar cells with an energy conversion efficiency of up to 22% guarantee sufficient power output in daylight conditions, which ensures the Renogy E.FLEX 120 performs better than similarly-rated polycrystalline solar panels in the market. Superior Durability The ETFE film provides long life and ultra protection again environmental stress. The IP67 water-resistant rating protects it from water splashing. Portable & Foldable with Kickstand 120 watts solar panel is foldable and comes with a case, which is convenient to carry wherever you go. Adjust the angle of the stand slightly to get more sunlight. Kick-stand ready for angled cell position, allowing more power generation during day hours. Compatibility EFLEX portable solar panel is designed for the most portable generator power station on the market with connector cable(sold separately), include Phoneix 500/1000 or similar power station from other brand. Package Includes E.FLEX 120 portable solar panel 1 x Specifications Max Power at STC: 120W Open Circuit Voltage (Voc): 23.8V Short Circuit Current (Isc): 6.4A Opitmum Operating Voltage (Vmp): 19.8V Optimum Operating Current (Imp): 6.1A Operating Temperature: -40°F to 149°F(-40℃ to +65℃) Dimensions:26.4*21.7*1.0 in(fold), 26.4*43.4 *0.2 in(unfold) Weight: 11 lbs (4.8 kg) Panel Leads (Pair):2.5mm2(39.37in) Warranty Information Panels Material and workmanship warranty: 1 year Certification
Dealer---Renogy 50 Watt 12 Volt Flexible Monocrystalline Solar Panel
111.35 AUD
Description Traditional solar panels are rigid and often enclosed in tempered glass. The Renogy 50W Flexible Solar Panel is anything but traditional. Perfect for marine use or placement on top of a van or vehicle, the Renogy 50W Lightweight Solar Panel is thin and capable of flexing up to 248 degrees. At 2.87 pounds, this flexible solar panel weighs only a quarter of its traditional 50W counterpart. Highly flexible, this lightweight panel can easily be installed on curved surfaces. This panel can also be used for other various applications, including providing power on a boat or teardrop trailer. Mounting Recommendation: Modules may be mounted using silicon structural adhesive on the backside of the panel. For detailed installation methods, please consult a local contractor for guidance. If you have any questions regarding this product, please submit a case! Key Features Extremely Flexible This panel is capable of meeting a wide range of applications where standard panels can be inconvenient to mount, such as on the curved roof of an airstream Ultra Lightweight Thanks to advanced polymer materials, this product weighs 70% less than conventional solar panels, making transportation and installation a breeze Super Thin Lamination Hardly noticeable, the Renogy 50W Lightweight Panel laid flat is only a tenth of an inch tall making it ideal for a stealthy solar setup. Highly Durable Rigorously tested, the 50W panel was designed to withstand extreme wind of up to 2400 Pa and snow loads of up to 5400 Pa Package Includes Renogy 50W Flexible Solar Panel 1 x Specifications Maximum Power at STC*: 50 W Operating Temperature: -40°F to 185°F / -40°C to 85°C Optimum Operating Voltage (Vmp): 18.5V Optimum OperatingCurrent (Imp): 2.71A Open-Circuit voltage (Voc): 22.6V Short-Circuit Current (Isc): 2.92A Dimensions: 26.5x20.0x0.16 in Weight: 2.87 lbs Cables: 12AWG Cables length: 17.7In(Negative Cable), 5.9In(Positive Cable) Warranty Information Panels 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty Certification
Renogy Dealer-Bifacial 220 Watt 12 Volt Monocrystalline Solar Panel
215.97 AUD
KEY FEATURES 【Bifacial Energy Yield up to 30%】 With the ability to capture sunlight from both sides, this panel can provide up to 30% more energy compared to traditional solar panels. 【More energy even in partially shaded】 With its innovative design that incorporates PERC, half-cut cell, bypass diodes, and 10 busbar technologies, this panel can maximize energy output even when partially shaded and protect the solar cells from overheating. 【More Generation on a Snowy Day】 The bifacial design of our solar panel helps to accelerate snow shedding and warm up the panel more quickly. Additionally, with the back side always available, our panel can continue to provide unstoppable solar power for your off-grid life. 【Fast and Easy Installation】 20 pre-drilled holes on the back of the panel allow for fast mounting and securing, ideal for off-grid applications including RVs, rooftops, cabins, yachts, sunrooms and more. To get the most out of your solar panels, they are recommended for use with Renogy's RV Tilt Mount Brackets, Z-mounts, corner mounts. 【Build to last】 With a durable IP68 rating junction box, and the ability to withstand wind loads of up to 2400Pa and snow loads of up to 5400Pa, plus an enhanced 25-year performance warranty, our solar panel is a reliable and long-lasting investment for your energy needs. Renogy's latest innovative 220W bifacial solar panel is among the best solar panels for marine and RV applications, offering up to 30% higher energy output than traditional solar panels thanks to its bifacial design that captures sunlight from both sides. Featuring premium Grade A+ monocrystalline solar cells, PERC technology, half-cut cells, 10 busbars, and bypass diode network, this monocrystalline solar panel ensures high solar cell efficiency and solar panel output. It is a great option that can provide power even in the toughest environmental conditions. If you have any questions regarding this product, please submit a case. NOTE If you have any questions regarding this product, please submit a ticket for troubleshooting assistance. Package Include Bifacial 220 Watt 12 Volt Monocrystalline Solar Panel x 1 Ewarranty card x 1 Specifications Max Power at STC: 220W Open Circuit Voltage: 21.86V Short Circuit Current: 13.41A Optimum Operating Voltage: 18.78V Optimum Operating Current: 12.24A Maximum System Voltage: 1000VDC Maximum Series Fuse Rating: 20A Module Efficiency: 18.6% Operating Temperature: -40°F~185°F / -40℃~85℃ Dimensions: 1547x763x30mm/60.9x30.0x1.2in Weight: 12.7kg/28.0lbs CERTIFICATIONS Manufactured in a Certified ISO 9001 Facility: YES Warranty Information Material and workmanship warranty: 5 Years Performance Warranty: 5 year 95% output warranty 10 year 90% output warranty 25 year 80% output warranty 1. What is the Benefits of Using Bifacial Solar Panels ? a.Captures sunlight from both sides; b.More efficient and power than monofacial panels; c.Perform better in overcast weather; d.Install...
Renogy Dealer- 2 Pieces 320 Watt Monocrystalline Solar Panel (1738)
759.99 AUD
- With the latest generation of high-efficiency PERC cells - Space Optimized-allowing fewer modules installation on your rooftop - Enhanced Anti-Corrosion Aluminum Frame - Fast and Easy Installation Output Efficiency Less Space Sustainable and Reliable Electricity Output Renogy 320W Monocrystalline Solar Panel can provide about 1600 Watt-hours of electricity per day (5-6 hours of direct sunlight), ensuring a consistent output over 80% for 25 years. Less Space, More Energy Compared with three Renogy 100W solar panels (41.8x20.9x1.4 in), one 320W solar panel (65.6 x 39.4x1.4 in) takes less space and generates more power, allowing fewer modules and higher output on your rooftop. Advanced PERC Solar Cells The passivation layer added to the backside of PERC solar cells makes them different from monocrystalline photovoltaic cells. The layer increases the panel's energy generation by boosting efficiency. Efficient Performance Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working by bypassing the underperforming cells when acci-dental shading happens. High Transparency The anti-reflective low iron-tempered glass has a high transparency of up to 91.5%, allowing direct sunlight to be converted to more electricity. Also, this glass is rugged enough to resist external impact. Durable Design The corrosion-resistant aluminum frame, and the glass that can withstand 5400Pa of snow loads and 2400Pa of wind pressure allow solar panels to stay outside for a long time without damage or performance loss. Premium Quality Powerful Performance Proven Reliability Learn more Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years Package Includes 320W Mono Solar Panel 4/6/8/10 x 1. Is each panel 320W or a whole combination? What about the size and weight? 320W per panel. The dimension of one panel is 65.6 x 39.4 x 1.4 inches and the weight is 39.7 lbs. Currently, we have 4-pack, 6-pack, 8-pack, and 10-pack available. 2. Can I use this panel for the roof of an RV? Yes, you can, as long as the roof of your RV has enough space to install it. Please confirm the size: 65.6 x 39.4 x 1.4 inches. In addition, this 320W solar panel is also ideal for residential and commercial rooftop systems, solar power plants,...
Renogy Dealer- 2 Pieces 320 Watt Monocrystalline Solar Panel (1737)
759.99 AUD
- With the latest generation of high-efficiency PERC cells - Space Optimized-allowing fewer modules installation on your rooftop - Enhanced Anti-Corrosion Aluminum Frame - Fast and Easy Installation Output Efficiency Less Space Sustainable and Reliable Electricity Output Renogy 320W Monocrystalline Solar Panel can provide about 1600 Watt-hours of electricity per day (5-6 hours of direct sunlight), ensuring a consistent output over 80% for 25 years. Less Space, More Energy Compared with three Renogy 100W solar panels (41.8x20.9x1.4 in), one 320W solar panel (65.6 x 39.4x1.4 in) takes less space and generates more power, allowing fewer modules and higher output on your rooftop. Advanced PERC Solar Cells The passivation layer added to the backside of PERC solar cells makes them different from monocrystalline photovoltaic cells. The layer increases the panel's energy generation by boosting efficiency. Efficient Performance Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working by bypassing the underperforming cells when acci-dental shading happens. High Transparency The anti-reflective low iron-tempered glass has a high transparency of up to 91.5%, allowing direct sunlight to be converted to more electricity. Also, this glass is rugged enough to resist external impact. Durable Design The corrosion-resistant aluminum frame, and the glass that can withstand 5400Pa of snow loads and 2400Pa of wind pressure allow solar panels to stay outside for a long time without damage or performance loss. Premium Quality Powerful Performance Proven Reliability Learn more Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years Package Includes 320W Mono Solar Panel 4/6/8/10 x 1. Is each panel 320W or a whole combination? What about the size and weight? 320W per panel. The dimension of one panel is 65.6 x 39.4 x 1.4 inches and the weight is 39.7 lbs. Currently, we have 4-pack, 6-pack, 8-pack, and 10-pack available. 2. Can I use this panel for the roof of an RV? Yes, you can, as long as the roof of your RV has enough space to install it. Please confirm the size: 65.6 x 39.4 x 1.4 inches. In addition, this 320W solar panel is also ideal for residential and commercial rooftop systems, solar power plants,...
Dealer-Renogy 400W Compact Mono Portable Solar Panel
719.99 AUD
DESCRIPTION - Portable at 13.7kg: compact, foldable, and lightweight. - Superior fiberglass material & Anodized aluminum frame for decades of reliability. - 1-minute setup with MC4 connectors and aluminum kickstands. - Unmatched durability with ≥IP67 protection & ETFE coating. - Extended 5-year warranty on materials and workmanship. Portable Power Anywhere Seamlessly match with most portable power stations for an instant charge. Robust Structure for Consistent Panel Output Sturdy, rust-resistant kickstands with adjustable angles allow maximum power generation. Unyielding Strength for Extended Outdoor Reliability Built to last with premium materials for years of reliable performance. Protective Case Easily portable for transportation, offering impact protection. Fiberglass Reinforcement Delivers exceptional durability even in the face of light hailstorms. Corner Protection Ensures longevity and resilience against wear and tear. ETFE Coating Provides enhanced durability and weather resistance. RV Shed The Dynamic Power Boost for Existing Solar Systems Connecting the solar suitcase to your existing solar system delivers increased power generation, enabling faster charging with effortless, rapid installation. The Dynamic Power Boost for Existing Solar Systems Connecting the solar suitcase to your existing solar system delivers increased power generation, enabling faster charging with effortless, rapid installation. Ultimate Reliability with Impeccable Efficiency Maximizing module potential with 22.7% cell efficiency while harnessing compact solar cell layouts for enhanced module efficiency. Uninterrupted Brilliance in Partial Shading Parallel wiring ensures individual shadows won't diminish the overall efficiency of the interconnected panels. Why Choose Renogy Redefining excellence in solar solutions. Learn more Package Includes NOTE: If you have any questions regarding this product, please call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance. More questions about your off-grid power system? Learn more from Renogy Learning Center! 400W Compact Mono Portable Solar Panel 1 x Module Performance Maximum System Voltage 600 VDC UL Max Power at STC 400W Open Circuit Voltage 47.2V Short Circuit Current 11.0A Maximum Series Fuse Rating 15A Warranty Model Operating Temperature -40°F~185°F / -40℃~85℃ Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 2838*855*20 mm (111.8x33.7 x0.8 in) Weight 13.7kg (30.2 lbs) Certification CE, RoHS, TSCA Warranty 5 years warranty 1. What do I need to complete my off-grid solar power system ? a.A solar panel has to be connected a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery. 2. What does off-grid and on-grid mean ? ...
Dealer---Renogy 50 Watt 12 Volt Monocrystalline Solar Panel
101.95 AUD
Description More compact than ever, the Renogy 50 Watt 12 Volt Monocrystalline Solar Panel is the perfect intro panel for solar beginners, or for seasoned users in need of a small solar setup. This key component is equipped with MC4 leads, making it easy to build or expand your solar system. Small but mighty, this 50W solar panel can power off-grid applications such as backyard lighting and sprinklers, or recharge batteries for marine use and dry camping. Give yourself a power boost with this new edition 50W panel and start your solar adventure. If you have any questions regarding this product, please submit a case! Key Features Reliable Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life. EL tested solar modules; no hot-spot heating guaranteed. Bypass diodes minimize power drop caused by shade and ensure excellent performance in low-light environments. TPT back sheet ensures smooth performance over a long period of time. Durable Guaranteed positive output tolerance (0-3%); withstands high winds (2400Pa) and snow loads (5400Pa). Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades. Anti-reflective, high transparency, low iron-tempered glass with enhanced stiffness and impact resistance. IP65 rated junction box provides complete protection against environmental particles and low pressure water jets. Versatile Can be used for many different applications. Ground mount compatible. Compatible with on-grid and off-grid inverters. Installation Ready Pre-drilled holes on the back of the panel allow for fast mounting and securing. Pre-drilled holes included for grounding. Compatible with different Renogy mounting systems such as Z-Brackets, Pole Mounts and Tilt Mounts. Package Includes Renogy 50 Watt 12 Volt Monocrystalline Solar Panel (New Edition) 1 x Built-in Components IP67 Rated waterproof MC4 connectors IP65 Rated waterproof junction box Panel Leads (Pair): 14AWG Specifications Output Cables: 1.31 ft Connectors: MC4 Connectors Maximum Power: 50W Maximum System Voltage: 600V DC (UL) Optimum Operating Voltage (Vmp): 18.6V Open-Circuit Voltage (Voc): 22.3V Optimum Operating Current (Imp): 2.69A Short-Circuit Current (Isc): 2.94A Weight: 3.5kgs / 7.72lbs Dimensions: 581x509x30mm / 22.9x20.0x1.18in Warranty Information Panels 25-year power output warranty: 5 year/95% efficiency rate, 10 year/90% efficiency rate, 25-year/80% efficiency rate 5-year material and workmanship warranty Accessories 1-year material warranty Certification
Renogy Dealer-100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design)【New】 (1649)
175.99 AUD
DESCRIPTION 【Reliable Power Output】 Renogy's 100W monocrystalline solar panel can provide an average of 400-500 Watt-hours (Wh) or 33-41Amp-hours (Ah) of electricity per day (depending on sun availability). 【Efficient Performance】 Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working during accidental shading by bypassing the underperforming cells. 【Industry-Leading Technology】 This Renogy 100W 12V Monocrystalline Panel is made from high purity silicon cells coated with advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide long-lasting durability. 【Built to Last】 Corrosion-resistant aluminum frame provides extended outdoor use that ensures the panel can last for decades. The IP65 rated junction box is versatile due to its ability to withstand dirt, dust, debris, and low-pressure water jets. 【Fast and Easy Installation】 Pre-drilled holes on the back of the panel allow for fast mounting and securing, ideal for off-grid applications including RVs, rooftops, cabins, yachts, and more. They are directly compatible with Renogy ground mounts, Z Brackets, Corner Brackets, Pole Mounts, and Tilt Mounts. High in power, compact in size, this Renogy 100 Watt 12 Volt Monocrystalline Solar Panel is the perfect option for any off-grid application. Ideal for RVs, motorhomes, cabins, marine areas, home backup power, and more. The panels feature lightweight aluminum frames and shatter-resistant glass, making them perfect for outdoor applications. It comes with pre-drilled mounting holes, solar connector leads, and a junction box. Allowing you to install, connect it to a controller, or expand with panels without breaking a sweat. The panels are made of premium Grade A+ monocrystalline solar cells that are more efficient than conventional polycrystalline solar cells. Since 2010, Renogy has gained rich experience in designing and manufacturing the most efficient and robust solar panels and the most complete off-grid solar system. A focus on testing, quality control, and traceability ensures our solar power system offers an industry-leading warranty and reliability guarantee. Invest in yourself by going Renogy. This will be your most economical long-term investment yet. NOTE More questions about your off-grid power system? Learn more from Renogy Learning Blog ! RV MARINE CAMPING OUTDOOR CABIN TRUCK Package Include Renogy 100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design) 1 x BUILT-IN COMPONENTS Renogy 100 Watt Monocrystalline Solar Panel Output Cables : 14 AWG (1.96ft long) Cell Type : Monocrystalline (6.5 x 3.3 in) Number of Cells : 36 IP65 Rated Waterproof Junction Box Specifications Maximum Power at STC : 100W Cell Efficiency : 22% Optimum Operating Voltage (Vmp) : 20.4V Open-Circuit Voltage (Voc) : 24.3V Optimum Operating Current (Imp) : 4.91A Short-Circuit Current (Isc) : 5.21A Operating Temperature : -40°F to 176°F Maximum Series Fuse Rating...
Renogy Dealer-100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design)【New】 (1648)
175.99 AUD
DESCRIPTION 【Reliable Power Output】 Renogy's 100W monocrystalline solar panel can provide an average of 400-500 Watt-hours (Wh) or 33-41Amp-hours (Ah) of electricity per day (depending on sun availability). 【Efficient Performance】 Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working during accidental shading by bypassing the underperforming cells. 【Industry-Leading Technology】 This Renogy 100W 12V Monocrystalline Panel is made from high purity silicon cells coated with advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide long-lasting durability. 【Built to Last】 Corrosion-resistant aluminum frame provides extended outdoor use that ensures the panel can last for decades. The IP65 rated junction box is versatile due to its ability to withstand dirt, dust, debris, and low-pressure water jets. 【Fast and Easy Installation】 Pre-drilled holes on the back of the panel allow for fast mounting and securing, ideal for off-grid applications including RVs, rooftops, cabins, yachts, and more. They are directly compatible with Renogy ground mounts, Z Brackets, Corner Brackets, Pole Mounts, and Tilt Mounts. High in power, compact in size, this Renogy 100 Watt 12 Volt Monocrystalline Solar Panel is the perfect option for any off-grid application. Ideal for RVs, motorhomes, cabins, marine areas, home backup power, and more. The panels feature lightweight aluminum frames and shatter-resistant glass, making them perfect for outdoor applications. It comes with pre-drilled mounting holes, solar connector leads, and a junction box. Allowing you to install, connect it to a controller, or expand with panels without breaking a sweat. The panels are made of premium Grade A+ monocrystalline solar cells that are more efficient than conventional polycrystalline solar cells. Since 2010, Renogy has gained rich experience in designing and manufacturing the most efficient and robust solar panels and the most complete off-grid solar system. A focus on testing, quality control, and traceability ensures our solar power system offers an industry-leading warranty and reliability guarantee. Invest in yourself by going Renogy. This will be your most economical long-term investment yet. NOTE More questions about your off-grid power system? Learn more from Renogy Learning Blog ! RV MARINE CAMPING OUTDOOR CABIN TRUCK Package Include Renogy 100 Watt 12 Volt Monocrystalline Solar Panel (Compact Design) 1 x BUILT-IN COMPONENTS Renogy 100 Watt Monocrystalline Solar Panel Output Cables : 14 AWG (1.96ft long) Cell Type : Monocrystalline (6.5 x 3.3 in) Number of Cells : 36 IP65 Rated Waterproof Junction Box Specifications Maximum Power at STC : 100W Cell Efficiency : 22% Optimum Operating Voltage (Vmp) : 20.4V Open-Circuit Voltage (Voc) : 24.3V Optimum Operating Current (Imp) : 4.91A Short-Circuit Current (Isc) : 5.21A Operating Temperature : -40°F to 176°F Maximum Series Fuse Rating...
Renogy Dealer- 2 Pieces 320 Watt Monocrystalline Solar Panel
759.99 AUD
- With the latest generation of high-efficiency PERC cells - Space Optimized-allowing fewer modules installation on your rooftop - Enhanced Anti-Corrosion Aluminum Frame - Fast and Easy Installation Output Efficiency Less Space Sustainable and Reliable Electricity Output Renogy 320W Monocrystalline Solar Panel can provide about 1600 Watt-hours of electricity per day (5-6 hours of direct sunlight), ensuring a consistent output over 80% for 25 years. Less Space, More Energy Compared with three Renogy 100W solar panels (41.8x20.9x1.4 in), one 320W solar panel (65.6 x 39.4x1.4 in) takes less space and generates more power, allowing fewer modules and higher output on your rooftop. Advanced PERC Solar Cells The passivation layer added to the backside of PERC solar cells makes them different from monocrystalline photovoltaic cells. The layer increases the panel's energy generation by boosting efficiency. Efficient Performance Bypass diodes protect the solar cells from overheating and allow the solar panel to continue working by bypassing the underperforming cells when acci-dental shading happens. High Transparency The anti-reflective low iron-tempered glass has a high transparency of up to 91.5%, allowing direct sunlight to be converted to more electricity. Also, this glass is rugged enough to resist external impact. Durable Design The corrosion-resistant aluminum frame, and the glass that can withstand 5400Pa of snow loads and 2400Pa of wind pressure allow solar panels to stay outside for a long time without damage or performance loss. Premium Quality Powerful Performance Proven Reliability Learn more Module Performance Operating Voltage 8-60 VDC (5 VDC for USB Type-C) Power Consumption at 12V Operating, WiFi On, 100% illumination: 3.2 W Operating, WiFi On, 50% illumination: 2.4 W Operating, WiFi On, 0% illumination: 1.9 W Off, logger still active: 1.5 W Communication Wi-Fi (IEEE 802.11b/g/n 2.4 GHz) Bluetooth LE and Bluetooth Mesh Zigbee 3.0 (IEEE 802.15.4) RS-485 Touch Screen 4 inches (480 x 480p) Leveling Range and Accuracy ±89°, 0.1° Warranty Model Operating Temperature -4℉ to 158℉ (-20℃ to 70℃) Operating Humidity 0% to 95% RH Operating Altitude Less than 5000m above sea level Installation Flush mount or place on a table Dimensions 4.17 x 4.17 x 1.05 in (106 x 106 x 26.6 mm) Weight 0.28 lb (128g) Certification CE, FCC, RoHS, TSCA, BQB, IC-ID Warranty 2 years Package Includes 320W Mono Solar Panel 4/6/8/10 x 1. Is each panel 320W or a whole combination? What about the size and weight? 320W per panel. The dimension of one panel is 65.6 x 39.4 x 1.4 inches and the weight is 39.7 lbs. Currently, we have 4-pack, 6-pack, 8-pack, and 10-pack available. 2. Can I use this panel for the roof of an RV? Yes, you can, as long as the roof of your RV has enough space to install it. Please confirm the size: 65.6 x 39.4 x 1.4 inches. In addition, this 320W solar panel is also ideal for residential and commercial rooftop systems, solar power plants,...
Dealer---Renogy MC4 Male/Female Solar Panel Cable Connectors
25.49 AUD
Description This connector is specifically designed for connecting photovoltaic solar systems with high mechanical requirements and extreme weather conditions. For permanent installations. Renogy MC4 Cable Connectors are made with highest quality materials. They are both heavier and sturdier than many other brands; ensuring long term reliability and performance. These connectors are designed to complete a solar panel (PV) array; typically in parallel applications. These connectors are also waterproof and resist dust build up. If you have any questions regarding this product, please submit a case! Key Features Hard plastic IP Rating:67 Package Includes 5 Pair MC4 Male/Female Solar Panel Cable Connectors 1 x Renogy MC4 Male/Female Solar Panel Cable Connectors One pair of MC4 solar panel cable connectors Two silver plated copper Rated Current: 30A Maximum Voltage: 1000VDC Wiring Size Range: 10; 12 AWG Contact Material: Silver Plated Copper Insulation Material: PA/PC Protection Class: IP67 Warranty Information Tools 1 year workmanship and material warranty Certification