Latestbuy.com.au: Bikes parts accessories
Price Comparison
The Best
ARK Trailer Reflector Pack (2 Amber and 2 Red)
26.9 AUD
It is important to fit reflectors to the side and rear of long towed objects. Fortunately this is easy with our range of amber, clear and red reflectors. Packs of 2. Self Adhesive ADR approved
Top
ARK Trailer Light LED Black Combo Set 278x100mm
220.9 AUD
Trailer Light LED Black Combo Set 278x100mm Individual Stop/Tail/Turn, 278x100mm, Black
Excellent
TechBrands LED Autolamps Trailer LED Light Combo Set (100x100mm) - 1pk
73.9 AUD
LED Autolamps Trailer LED Light Combo Set (100x100mm) - 1pk Individual Stop/Tail/Turn, 100x100mm, 12V
Recommended
TechBrands Right Angle Elbow Joiner Clamp - 38mm
42.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Type : Joiner Material : Nylon Inputs : 1 units Outputs : 1 units Usage : Water
Featured
TechBrands Clamp Bracket Stem (50x100mm)
43.9 AUD
This range of hardware is required to give options to mount your roller axles to different boat configurations. Clamp Bracket, Stem, 50x100mm, 18mm Square Stem Packaged Length : 11.5cm Packaged Width : 11cm Packaged Height : 5cm
Alternative
TechBrands Right Angle Elbow Joiner Clamp - 31mm
40.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Type : Joiner Material : Nylon Inputs : 1 units Outputs : 1 units Usage : Water
TechBrands T-Bolt Drive Hose Clamp (26-28mm)
25.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 16mm Clamp Range: 26-28mm
TechBrands Bolt on Stem Double Square Clamp 18mm
48.9 AUD
This range of hardware is required to give options to mount your roller axles to different boat configurations. Bolt on Stem Clamp, Double, 18mm Square 145mm Stem Pitch Packaged Length : 26cm Packaged Width : 6cm Packaged Height : 4cm
MDI Australia Prescription Drinking Hat
33.9 AUD
Free up your hands to do other things while drinking! Load up the Drinking Hat with two cans and sip away at your own pace! It's a mobile party! Just add two cans of drink to your Drinking Hat and you are ready to get your party on! This hat is the ideal solution to the problem of what to do with your drink while you're cooking, grilling or just talking with your hands! Fun and eye-catching as well practical, the Drinking Hat is available in the following designs: Australian Flag, Miner's hat (with battery powered light for drinking in the dark), camouflage, "Thirst Aid", "Wasted", "Prescription Party Time" and plain purple. Each one holds two standard drinks cans and the straws lead from the cans straight into your mouth for an efficient and spill proof drinking experience. Great for party animals, people celebrating a milestone birthday or those who just like to drink a lot and like to find an easier way to do things! These hats make great gag gifts for the office Secret Santa or get one for a friend or family member has spilled a beer or two on the carpet at the family Christmas party in years past! Take your Hands-Free drinking hat to a party or festival, they are also great for sporting events and times when thirst calls, but your hands are needed for something more important than just holding a can. Father's Day, Dad's Birthday or Christmas….a beer drinking hat is a fun gift for any occasion and is sure to be appreciated as a labor saving device that delivers beer right to the spot! All products measure approx. 300(L) x 300(W) x 150(H) mm The miner hat only requires 3 x AA batteries (not included)
TechBrands Port and Starboard LED Navigation Lights - Black
123.9 AUD
Side mount with only 1 x No. 8 mounting screw required (not supplied). Sold as a pair. Extra fixing location by plastic lug. Black body with red/green lens LED light powered. 97(L) x 60(W) x 35(D)mm
TechBrands Right Angle Elbow Joiner Clamp - 12mm
25.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Type : Joiner Material : Nylon Inputs : 1 units Outputs : 1 units Usage : Water
TechBrands LED Autolamps Trailer LED Light Combo Set 2pk (200x92mm)
249.9 AUD
This is a 2 bar set, one standard, one with number plate illuminator for smaller caravans, boat trailers, etc. Waterproof 200x92mm, 12V
Jaycar Sealed Polycarbonate Enclosures - 115x65x40mm
73.9 AUD
Made with Polycarbonate material and moulded in light grey.Operating temperature : minus 40C to 125CThe lid and base incorporate a toungue and groove ... Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically Dimensions 115x65x40mm
Jaycar Sealed Polycarbonate Enclosures - 222x146x55mm
73.9 AUD
Made with Polycarbonate material and moulded in light grey.Operating temperature : minus 40C to 125CThe lid and base incorporate a toungue and groove ... Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically Dimensions 222x146x55mm
Jaycar Sealed Polycarbonate Enclosures - 115x90x55mm
68.9 AUD
Made with Polycarbonate material and moulded in light grey.Operating temperature : minus 40C to 125CThe lid and base incorporate a toungue and groove ... Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically Dimensions 115x90x55mm
Jaycar Sealed Polycarbonate Enclosures - 82x80x55mm
73.9 AUD
Made with Polycarbonate material and moulded in light grey.Operating temperature : minus 40C to 125CThe lid and base incorporate a toungue and groove ... Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically Dimensions 82x80x55mm
Jaycar Sealed Polycarbonate Enclosures - 171x121x80mm
51.9 AUD
Made with Polycarbonate material and moulded in light grey.Operating temperature : minus 40C to 125CThe lid and base incorporate a toungue and groove ... Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically Dimensions 171x121x80mm
Nite Ize STS Bike Light - Orange
89.9 AUD
Ride with confidence and visibility with the Nite Ize STS Bike Light in a striking orange hue. This dynamic bike light combines safety and style, ensuring you're seen on the roads while adding a pop of color to your biking adventures. The easy-to-use touch interface and adjustable beam make the STS Bike Light a versatile companion, whether you're commuting or cycling for pleasure. Embrace the bold orange design and make a statement on the roads with the Nite Ize STS Bike Light, a perfect blend of safety and vibrant aesthetics for the modern cyclist. The Nite Ize STS Bike Light in vibrant Orange, an eye-catching and practical addition for cyclists looking to enhance their visibility and safety on the road. Crafted with durability and efficiency in mind, this bike light delivers a powerful and focused beam, ensuring a secure biking experience in various conditions. Appeals to riders who appreciate a combination of functionality and style, offering an orange bike light that not only stands out for safety but also adds a pop of color to their cycling gear ensemble
Bikes parts accessories Latestbuy.com.au best products
TechBrands Reducing Joiner Clamp - 38mm-32mm
26.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Reducing Joiner 38mm - 32mm Reducer
TechBrands T-Bolt Drive Hose Clamp - 17-19mm
22.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 16mm Clamp Range: 17-19mm
Jaycar Superb Looking Rocker Switch Cover - Driving Lights
25.9 AUD
These are the superb looking rocker switches that you have seen in the cockpits of the 70-100ft luxury motor cruisers recently. They would look great in your 4WD, RV, Caravan or any other application as well. The base switch supplied (rated at 12V 20A, 24V 10A) comes with a double-LED illumination (low in OFF, high in the ON position), a standard rocker cover and a standard range of decals to customise the switch to your application. Typical decals are symbols for: windscreen wipers, horn, heater, etc; there are dozens of these decals included. Also available are a set of special laser-etched covers with the following graphic symbols to really create a professional finish. You need to buy the basic switch (in blue, white or red illumination) and then the custom cover (if required.) SK-0910 SPDT Rocker - White SK-0912 SPDT Rocker - Red SK-0914 SPDT Rocker - Blue SK-0916 SPDT Rocker - Orange SK-0920 "12V Power" SK-0921 "Fridge" SK-0922 "Aux Battery" SK-0923 "Camper Power" SK-0924 "Spot Lights" SK-0925 "Horn" SK-0926 "Rear View Camera" SK-0927 "Inverter" SK-0928 "Driving lights" SK-0929 "Thermofan"
TechBrands Right Angle Elbow Joiner Clamp - 25mm
37.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Type : Joiner Material : Nylon Inputs : 1 units Outputs : 1 units Usage : Water
Gamegenic Token Holder - Black
26.9 AUD
The easy, affordable way to protect and transport your tokens! Save precious space in your game box or on the gaming table with our Token Holder! This token box safely stores a huge variety of tokens, dice, and even 40 double-sleeved, 50 single-sleeved, or 80 unsleeved cards*. The innovative secure click-lock mechanism makes sure that no items get lost. Easily keep track of what you store in your Token Holders with the convenient write-on strips. The Token Holder is compatible with other Gamegenic products, such as Holder Cave, Dungeon 1100+, and Dungeon S 550+. It is perfect for a huge variety of board and card games. *Optimized for particularly Thick Inner Sleeves. We recommend Gamegenic sleeves. Sleeves from other brands may affect capacity/compatibility Affordable token box to safely store tokens or cards Modular system: compatible with Holder Cave, Dungeon 1100+, Dungeon S 550+ Holds up to 40 double-sleeved, 50 single-sleeved, or 80 unsleeved cards* Durable token box with write-on strips and innovative secure click-lock mechanism Perfect for a huge variety of board games, LCGs, and TCGs Strong welding points Acid-free. No PVC 10 different colors
Duinotech Heart Rate Sensor Module Kit
63.9 AUD
Make your own health and fitness monitoring project with this heart rate monitor sensor kit. The compact board measures the electrical activity of the heart via three ECG electrode sensors, then filters and amplifies the analogue signals so that the heartbeat can be charted as an ECG or electrocardiogram using your Arduino or similar microcontroller. Powered by 3.3V. Kit includes the heartbeat sensor board, 3 x adhesive ECG pads and a colour-coded connecting cable. A 12-pack of spare adhesive ECG pads are available separately (XC3785). Leads Off Detection Auto Shutdown Pin AD8232 Heart Monitor Board LED Onboard Flashes with Heart Beat
TechBrands Reducing Joiner Clamp - 38mm-25mm
33.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Reducing Joiner 38mm - 23mm Reducer
Digitech K-Type Thermocouple Sensor - Wire
36.9 AUD
This is essentially the same as the QM-1282 probe, except that the sensor is mounted on the end of the cable - noprobe. Suits digital multimeters. Measures from minus 50°C to over 250°C, actual range depends on the DMM it's used with. Measures in Celcius : true Outdoor / Exterior Scale : -50.000000°C, 250.00000000°C Sensor Type : K-Type Thermocouple
TechBrands T-Bolt Drive Hose Clamp - 48-51mm
32.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 19mm Clamp Range: 48-51mm
TechBrands T-Bolt Drive Hose Clamp - 23-25mm
25.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 16mm Clamp Range: 23-25mm
Jaycar Sealed Polycarbonate Enclosure (171x121x55mm) - Clear Lid
61.9 AUD
Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C Made with Polycarbonate material and moulded in light grey. Operating temperature : minus 40C to 125C The lid and base incorporate a toungue and groove sealing system with a EPDM gasket Lid fixing screws are M-4 stainless steel (non metallic) into threaded brass inserts Wall mounting holes and lid fixing screws are outside the sealing area thus preventing the ingress of moisture & dust Designed to IP65 of IEC 529and NEMA 4 (dust and hoseproof) Internal guide slots for mounting PCB assemblies vertically
TechBrands T-Bolt Drive Hose Clamp - 32-35mm
27.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 19mm Clamp Range: 32-35mm
TechBrands T-Bolt Drive Hose Clamp - 56-59mm
36.9 AUD
High performance, high pressure, high criticality applications. These are Australian-made Tridon products as well. 304 grade stainless steel. The nature of construction of the T-Drive mechanism is that it is incredibly strong and can impart huge pressure on the hose. With this in mind the edges of the clamping band is rolled upward slightly. This stops the edge of the band cutting into the hose. You will also notice with T-bolt drive clamps that their actual clamping range is so much narrower. You must be more careful in selecting a clamp that is appropriate for your application. Width: 19mm Clamp Range: 56-59mm
Duncan Quick Cube 2 x 2
25.9 AUD
Want to learn how to solve the puzzle? The Quick Cube 2 x 2 is the perfect size for your beginner solver. Its not only easier to learn, but large blocks feature quick turning mobility for faster speeds. Want to learn how to solve the puzzle? The Quick Cube 2 x 2 is the perfect size for your beginner solver. Its not only easier to learn, but large blocks feature quick turning mobility for faster speeds.
ARK Screw On Trailer Reflectors - Amber
26.9 AUD
It is important to fit reflectors to the side and rear of long towed objects. Fortunately this is easy with our range of amber, clear and red reflectors. Packs of 2. Self Adhesive ADR approved
TechBrands Straight Joiner Clamp - 38mm
31.9 AUD
Manufactured from a glass reinforced nylon composite providing high strength and light weight. Immune to corrosion and electrolysis, resistant to chemicals and UV and a wide operating temperature range of -20DegC to +110DegC. The use of two hose clamps is recommended for secure hose fitting. Type : Joiner Material : Nylon Input Size : 38mm (1/2") Hose Barb Input Type : Threaded Male Output Size : 13mm (1/2") Hose Barb Output Type : Threaded Male Inputs : 1 units Outputs : 1 units Usage : Water